Ultrathin two-dimensional medium-entropy alloy as a highly efficient and stable electrocatalyst for oxygen evolution reaction

Abstract

The development of highly active, durable, and low-cost electrocatalysts is crucial for electrocatalytic hydrogen production. Ultrathin two-dimensional (2D) nanomaterials have extremely large specific surface areas, making them highly desirable electrocatalyst morphologies. Medium-entropy alloys (MEAs) exhibit compositional tunability and entropy-driven structural stability, making them ideal electrocatalyst candidates. In this study, MoCoNi MEA with ultrathin 2D morphology was successfully developed using a facile ionic layer epitaxial method. The ultrathin 2D MoCoNi MEA showed an excellent oxygen evolution reaction (OER) electrocatalytic performance, with a low overpotential of 167 mV at a current density of 10 mA/cm² and small Tafel slope of 33.2 mV/dec. At the overpotential of 167 mV, the ultrathin 2D MoCoNi MEA exhibited ultrahigh mass activity of 3359.6 A/g, which is three orders of magnitude higher than that of the commercial noble metal oxide RuO₂ (1.15 A/g). This excellent electrocatalytic performance was attributed to the synergy of multiple active metal-induced medium entropies, as well as the ultrathin thickness, which considerably shortened the charge-transfer distance and thus significantly promoted charge transfer. Owing to the natural entropy-stabilizing effect, the ultrathin 2D MoCoNi MEA maintained 90% of the initial current after a continuous OER electrocatalytic test for 134 h, showing impressive electrocatalytic stability. This study opens new avenues for the development of high-performance and low-cost electrocatalyst materials by creating MEAs with ultrathin 2D morphology.

Keywords

medium-entropy alloys / 2D nanomaterials / ionic layer epitaxy / oxygen evolution reaction / electrocatalysis

References

[1] Y.D. Liu, T. Sakthivel, F. Hu, et al., Enhancing the d/p-band center proximity with amorphous–crystalline interface coupling for boosted pH-robust water electrolysis, Adv. Energy Mater., 13(2023), No. 11, art. No. 2203797.

[2] Wei LT, Du MY, Zhao R, et al.. High-valence Mo doping for highly promoted water oxidation of NiFe (oxy)hydroxide. J. Mater. Chem. A, 2022, 10(4423790

[3] Yang N, Tang C, Wang KY, Du G, Asiri AM, Sun XP. Iron-doped nickel disulfide nanoarray: A highly efficient and stable electrocatalyst for water splitting. Nano Res., 2016, 9(113346

[4] Righi G, Plescher J, Schmidt FP, et al.. On the origin of multihole oxygen evolution in haematite photoanodes. Nat. Catal., 2022, 5(10888

[5] Z.L. Chen, H.Y. Yang, S. Mebs, et al., Reviving oxygen evolution electrocatalysis of bulk La–Ni intermetallics via gaseous hydrogen engineering, Adv. Mater., 35(2023), No. 11, art. No. 2208337.

[6] S.Y. Chen, S.S. Zhang, L. Guo, et al., Reconstructed Ir–O–Mo species with strong Brønsted acidity for acidic water oxidation, Nat. Commun., 14(2023), No. 1, art. No. 4127.

[7] X.Y. Liu, H.L. Lu, S.L. Zhu, et al., Alloying-triggered phase engineering of NiFe system via laser-assisted Al incorporation for full water splitting, Angew. Chem. Int. Ed., 62(2023), No. 13, art. No. e202300800.

[8] Wang YZ, Zhang ZY, Mao YC, Wang XD. Two-dimensional nonlayered materials for electrocatalysis. Energy Environ. Sci., 2020, 13(113993

[9] Zhao YH, Wang YZ, Dong YT, et al.. Quasi-two-dimensional earth-abundant bimetallic electrocatalysts for oxygen evolution reactions. ACS Energy Lett., 2021, 6(93367

[10] Tahir M, Pan L, Idrees F, et al.. Electrocatalytic oxygen evolution reaction for energy conversion and storage: A comprehensive review. Nano Energy, 2017, 37: 136

[11] Y.C. Zou, Y.Q. Shi, T.X. Wang, et al., Quantum dots as advanced nanomaterials for food quality and safety applications: A comprehensive review and future perspectives, Compr. Rev. Food Sci. Food Saf., 23(2024), No. 3, art. No. e13339.

[12] M. Marimuthu, K.C. Xu, W. Song, Q.S. Chen, and H.L. Wen, Safeguarding food safety: Nanomaterials-based fluorescent sensors for pesticide tracing, Food Chem., 463(2025), art. No. 141288.

[13] Mu RJ, Hong X, Ni YS, et al.. Recent trends and applications of cellulose nanocrystals in food industry. Trends Food Sci. Technol., 2019, 93: 136

[14] L. Gao, Q.L. Liao, X.K. Zhang, et al., Defect-engineered atomically thin MoS₂ homogeneous electronics for logic inverters, Adv. Mater., 32(2020), No. 2, art. No. 1906646.

[15] Ou Y, Kang Z, Liao QL, Gao SH, Zhang Z, Zhang Y. Point defect induced intervalley scattering for the enhancement of interlayer electron transport in bilayer MoS₂ homojunctions. Nanoscale, 2020, 12(179859

[16] Jin HY, Guo CX, Liu X, et al.. Emerging two-dimensional nanomaterials for electrocatalysis. Chem. Rev., 2018, 118(136337

[17] G.Y. Yan, Y.Z. Wang, Z.Y. Zhang, et al., Nanoparticle-decorated ultrathin La₂O₃ nanosheets as an efficient electrocatalysis for oxygen evolution reactions, Nano-Micro Lett., 12(2020), No. 1, art. No. 49.

[18] Chen XF, Wang Q, Cheng ZY, et al.. Direct observation of chemical short-range order in a medium-entropy alloy. Nature, 2021, 592(7856712

[19] Zhang RP, Zhao ST, Ding J, et al.. Short-range order and its impact on the CrCoNi medium-entropy alloy. Nature, 2020, 581(7808283

[20] H. Park, J.W. Bae, T.H. Lee, et al., Surface-tailored medium entropy alloys as radically low overpotential oxygen evolution electrocatalysts, Small, 18(2022), No. 11, art. No. 2105611.

[21] Bai LC, Hsu CS, Alexander DTL, Chen HM, Hu XL. Double-atom catalysts as a molecular platform for heterogeneous oxygen evolution electrocatalysis. Nat. Energy, 2021, 6(111054

[22] L. Wu, X.P. Shen, Z.Y. Ji, et al., Facile synthesis of medium-entropy metal sulfides as high-efficiency electrocatalysts toward oxygen evolution reaction, Adv. Funct. Mater., 33(2023), No. 3, art. No. 2208170.

[23] Zhang ZY, Carlos C, Wang YZ, et al.. Nucleation kinetics and structure evolution of quasi-two-dimensional ZnO at the air–water interface: An in situ time-resolved grazing incidence X-ray scattering study. Nano Lett., 2022, 22(73040

[24] Yin X, Chen QY, Tian P, et al.. Ionic layer epitaxy of nanometer-thick palladium nanosheets with enhanced electrocatalytic properties. Chem. Mater., 2018, 30(103308

[25] F. Wang, J.H. Seo, G.F. Luo, et al., Nanometre-thick single-crystalline nanosheets grown at the water–air interface, Nat. Commun., 7(2016), art. No. 10444.

[26] Koebel M, Strutz EO. Thermal and hydrolytic decomposition of urea for automotive selective catalytic reduction systems: Thermochemical and practical aspects. Ind. Eng. Chem. Res., 2003, 42(102093

[27] G.Y. Yan, T. Wu, S.M. Xing, F. Chen, B.W. Zhao, and W.J. Gao, Ultrathin Ce-doped La₂O₃ nanofilm electrocatalysts for efficient oxygen evolution reactions, Nanotechnology, 33(2022), No. 24, art. No. 245405.

[28] R.D. Kamachali and L. Wang, Elastic energy of multi-component solid solutions and strain origins of phase stability in high-entropy alloys, Scripta Mater., 206(2022), art. No. 114226.

[29] S.R. Maalouf and S.S. Vel, Nonlinear elastic response of 2D materials under simultaneous in-plane strains and flexural deformations, Int. J. Eng. Sci., 214(2025), art. No. 104270.

[30] Wang Y, Huang L, Li H. Homogeneous passivation and corrosion resistance of Fe-based amorphous coatings in extreme environments. Acta Mater., 2020, 188: 41

[31] P.F. Tian, W. Zong, J. Xiong, et al., Dynamic reconstruction of crystal/amorphous hetero-phosphate Janus interfaces for highly stable seawater splitting, Adv. Funct. Mater., 35(2025), No. 42, art. No. 2504862.

[32] Fan LF, Ji YX, Wang GX, et al.. High entropy alloy electrocatalytic electrode toward alkaline glycerol valorization coupling with acidic hydrogen production. J. Am. Chem. Soc., 2022, 144(167224

[33] N. Zhang, X.B. Feng, D.W. Rao, et al., Lattice oxygen activation enabled by high-valence metal sites for enhanced water oxidation, Nat. Commun., 11(2020), No. 1, art. No. 4066.

[34] Moniri S, Yang Y, Ding J, et al.. Three-dimensional atomic structure and local chemical order of medium- and high-entropy nanoalloys. Nature, 2023, 624(7992564

[35] M.R. Long, S.Y. Lai, K.H. Miao, W.D. Jiang, W. Fan, and X.W. Kang, IrPdCuFeNiCoMo based core–shell icosahedron nanocrystals and nanocages for efficient and robust acidic oxygen evolution, Angew. Chem. Int. Ed., 64(2025), No. 7, art. No. e202419956.

[36] L.Y. Yi, S.M. Xiao, Y.P. Wei, et al., Free-standing high-entropy alloy plate for efficient water oxidation catalysis: Structure/composition evolution and implication of high-valence metals, Chem. Eng. J., 469(2023), art. No. 144015.

[37] F.Q. Li, H. Wu, S.C. Lv, et al., Two birds with one stone: Contemporaneously enhancing OER catalytic activity and stability for dual-phase medium-entropy metal sulfides, Small, 20(2024), No. 11, art. No. 2309025.

[38] Cai ZX, Bolar S, Ito Y, Fujita T. Enhancing oxygen evolution reactions in nanoporous high-entropy catalysts using boron and phosphorus additives. Nanoscale, 2024, 16(94803

[39] Raj G, Nandan R, Kumar K, et al.. High entropy alloying strategy for accomplishing quintuple-nanoparticles grafted carbon towards exceptional high-performance overall seawater splitting. Mater. Horiz., 2023, 10(115032

[40] Cao XH, Gao YT, Wang ZH, et al.. FeNiCrCoMn high-entropy alloy nanoparticles loaded on carbon nanotubes as bifunctional oxygen catalysts for rechargeable zinc-air batteries. ACS Appl. Mater. Interfaces, 2023, 15(2732365

[41] Z.Q. Chen, J.B. Wen, C.H. Wang, and X.W. Kang, Convex cube-shaped Pt₃₄Fe₅Ni₂₀Cu₃₁Mo₉Ru high entropy alloy catalysts toward high-performance multifunctional electrocatalysis, Small, 18(2022), No. 45, art. No. 2204255.

[42] Li P, Wan XH, Su JH, et al.. A single-phase FeCoNiMnMo high-entropy alloy oxygen evolution anode working in alkaline solution for over 1000 h. ACS Catal., 2022, 12(1911667

[43] Mei YJ, Feng YB, Zhang CX, Zhang Y, Qi QL, Hu J. High-entropy alloy with Mo-coordination as efficient electrocatalyst for oxygen evolution reaction. ACS Catal., 2022, 12(1710808

[44] S.Y. Li, T.X. Nguyen, Y.H. Su, et al., Sputter-deposited high entropy alloy thin film electrocatalyst for enhanced oxygen evolution reaction performance, Small, 18(2022), No. 39, art. No. 2106127.

[45] S.Q. Wang, B.L. Xu, W.Y. Huo, et al., Efficient FeCoNiCuPd thin-film electrocatalyst for alkaline oxygen and hydrogen evolution reactions, Appl. Catal., B, 313(2022), art. No. 121472.

[46] Han X, Chen Q, Chen QX, et al.. Eutectic dual-phase microstructure modulated porous high-entropy alloys as high-performance bifunctional electrocatalysts for water splitting. J. Mater. Chem. A, 2022, 10(2011110

[47] H. Liu, H.Y. Qin, J.L. Kang, et al., A freestanding nanoporous NiCoFeMoMn high-entropy alloy as an efficient electrocatalyst for rapid water splitting, Chem. Eng. J., 435(2022), art. No. 134898.

[48] S.Q. Wang, W.Y. Huo, F. Fang, Z.H. Xie, J.K. Shang, and J.Q. Jiang, High entropy alloy/C nanoparticles derived from poly-metallic MOF as promising electrocatalysts for alkaline oxygen evolution reaction, Chem. Eng. J., 429(2022), art. No. 132410.

[49] Guo DX, Ping Y, Wang CJ, Hou CG, Wang DH. Crystalline/amorphous c-NiMo/a-NiMoO_x nanoarrays for urea-assisted energy-saving H₂ production in alkaline seawater. Green Chem., 2024, 27(1144

[50] S. Liu, Y.F. Zhang, L. Hao, A. Nsabimana, and S.G. Shen, CoFe-LDHs were grown on Co-layered hydroxides to achieve 3D-hierarchical flower like architecture for efficient oxygen evolution reaction, J. Environ. Chem. Eng., 12(2024), No. 5, art. No. 114152.

[51] Kaur R, Gaur A, Pundir V, Arun K, Bagchi V. Unleashing unprecedented activation of high-valent Ni and Fe charge dynamics in CeF₃–NiFe layered double hydroxide heterostructure: Demonstrating oxygen evolution reaction at an extremely high current density. J. Colloid Interface Sci., 2024, 672: 736

[52] A. Al Mahmud, M.R. Thalji, G. Dhakal, Y. Haldorai, W.K. Kim, and J.J. Shim, Bifunctional MoC/NiC@N-doped reduced graphene oxide nano electrocatalyst for simultaneous production of hydrogen and oxygen through efficient overall electrochemical water splitting, Mater. Today Nano, 27(2024), art. No. 100489.

[53] G. Ghanashyam and H. Kim, Co-doped 1T-MoS₂ microspheres embedded in N-doped reduced graphene oxide for efficient electrocatalysis toward hydrogen and oxygen evolution reactions, J. Power Sources, 596(2024), art. No. 234088.

[54] Kong C, Zhi C, Wu ZR, Yang WQ, Yang J, Sun ZT. Tailoring hypervalent Nickel induced by oxygen vacancy toward enhanced oxygen evolution reaction performance in self-supporting NiFe-(oxy)hydroxides electrodes. J. Colloid Interface Sci., 2024, 665: 863

[55] J.Y. Wang, Z.Y. Xing, R.Y. Kang, et al., Metal nitride controlled atomic doping of Mo^x+ in NiFe (oxy)hydroxide to trigger lattice oxygen-mediated mechanism for superior oxygen evolution, Adv. Funct. Mater., 35(2025), No. 14, art. No. 2418439.

[56] Yeh JW, Chen SK, Lin SJ, et al.. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes. Adv. Eng. Mater., 2004, 6(5299

[57] George EP, Raabe D, Ritchie RO. High-entropy alloys. Nat. Rev. Mater., 2019, 4(8515

[58] Yao YG, Huang ZN, Xie PF, et al.. Carbothermal shock synthesis of high-entropy-alloy nanoparticles. Science, 2018, 359(63831489

[59] Calle-Vallejo F, Tymoczko J, Colic V, et al.. Finding optimal surface sites on heterogeneous catalysts by counting nearest neighbors. Science, 2015, 350(6257185

[60] S.D. Wang, J.H. Wang, Y. Sun, et al., Ultrastrong and ductile metastable Fe-rich medium-entropy alloy with high-density nanolamellar L1₂ precipitates, Scripta Mater., 247(2024), art. No. 116100.

[61] J. Wu, X.H. Zhu, S.R. Huang, Z.B. Lu, and H.G. Zhu, Influence of Ti on enhancing the strength and ductility of Fe-rich medium-entropy alloys: A combined theoretical and experimental study, Mater. Sci. Eng. A, 900(2024), art. No. 146507.

RIGHTS & PERMISSIONS

University of Science and Technology Beijing