Ferro-alloys as high temperature phase change materials

Abstract

Latent heat thermal energy storage (LHTES) is an attractive method for enhancing the functionality and availability of renewable energy sources, and it is extensively used to support concentrated solar power technologies. The main feature of every LHTES system is a phase change material (PCM), i.e., a substance used to absorb/release energy upon cyclic melting/solidification. This study investigates the potential of ferro-alloys as high-performance PCM candidates, targeting energy storage capacities exceeding 1 MWh·m⁻³, and operational temperatures above 1000°C. A thermodynamic assessment of binary and ternary Fe-based systems, alloyed with Si, B, Cr, V, and Ti, was conducted to identify compositions with optimal phase transition characteristics and heat storage potential. The results highlight the significant potential of the Fe–Si–B system, where boron’s exceptionally high latent heat enhances energy storage capacity despite challenges posed by its high melting point and cost. The Fe–Si–Cr system revealed promising alloys, such as Fe–34Si–38Cr and Fe–34Si–43Cr, offering excellent energy storage density and favorable phase transition temperatures. In the Fe–Si–V system, vanadium additions produced alloys like Fe–36Si–14V and Fe–34Si–10V, which meet energy storage criteria, although the high melting points of some Si–V phases may restrict their practical applicability. The Fe–Si–Ti system showed standout compositions, including Fe–38Si–20Ti and Si–48Ti, achieving energy storage capacities of approximately 1.5 MWh·m⁻³. This study compares ferro-alloy PCMs against state-of-the-art metallic PCMs, highlighting the performance of certain ferro-alloys.

Keywords

ferro-alloys / ferro-silicon-alloys / phase change materials / latent heat thermal energy storage / FactSage

References

[1] Zhao HR, Wu QW, Hu SJ, Xu HH, Rasmussen CN. Review of energy storage system for wind power integration support. Appl. Energy, 2015, 137: 545

[2] M.M. Rahman, A.O. Oni, E. Gemechu, and A. Kumar, Assessment of energy storage technologies: A review, Energy Convers. Manage., 223(2020), art. No. 113295.

[3] A. Datas, E López, A. Ramos, et al., Ultra-high temperature energy storage and conversion: A review of the AMADEUS project results, AIP Conf. Proc., 2303(2020), No. 1, art. No. 0028552.

[4] Jiao J M. Si-based Phase Change Materials in Thermal Energy Storage Systems, 2020, Trondheim, Norwegian University of Science and Technology154

[5] Sharma A, Tyagi VV, Chen CR, Buddhi D. Review on thermal energy storage with phase change materials and applications. Renew. Sust. Energ. Rev., 2009, 13(2318

[6] Y.H. Qin, M. Ghalambaz, M. Sheremet, M. Fteiti, and F. Alresheedi, A bibliometrics study of phase change materials (PCMs), J. Energy Storage, 73(2023), art. No. 108987.

[7] Kenisarin MM. High-temperature phase change materials for thermal energy storage. Renewable Sustainable Energy Rev., 2010, 14(3955

[8] Homa M, Sobczak N. Measurements of temperature and heat of phase transformation of pure silicon by using differential scanning calorimetry. J. Therm. Anal. Calorim., 2019, 138(64215

[9] J.M. Jiao, B. Grorud, C. Sindland, et al., The use of eutectic Fe-Si-B alloy as a phase change material in thermal energy storage systems, Materials, 12(2019), No. 14, art. No. 2312.

[10] Nomoto H. Tanuma T. Development in materials for ultra-supercritical (USC) and advanced ultra-supercritical (A-USC) steam turbines. Advances in Steam Turbines for Modern Power Plants, 2017, Cambridge, Woodhead Publishing263

[11] Wright I, Maziasz PJ, Ellis FV, Gibbons TB, Woodford D. Materials issues for turbines for operations in ultra-supercritical steam. 29th International Technical Conference on Coal Utilization & Fuel System, 2004Florida

[12] X. Yun Debbie Soo, J. Min Regine See, W.Y. Wu, et al., Recent advancement in the development of silicon-based phase change materials, ChemistrySelect, 8(2023), No. 48, art. No. e202304794.

[13] Liu M, Saman W, Bruno F. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems. Renewable Sustainable Energy Rev., 2012, 16(42118

[14] L.F. Cabeza, F.R. Martínez, E. Borri, S. Ushak, and C. Prieto, Thermal energy storage using phase change materials in high-temperature industrial applications: Multi-criteria selection of the adequate material, Materials, 17(2024), No. 8, art. No. 1878.

[15] Y. Zhao, C.Y. Zhao, C.N. Markides, H. Wang, and W. Li, Medium- and high-temperature latent and thermochemical heat storage using metals and metallic compounds as heat storage media: A technical review, Appl. Energy, 280(2020), art. No. 115950.

[16] M. Imran Khan, F. Asfand, and S.G. Al-Ghamdi, Progress in research and development of phase change materials for thermal energy storage in concentrated solar power, Appl. Therm. Eng., 219(2023), art. No. 119546.

[17] N. Sheng, Y.F. Ge, Y.Q. Guo, C.Y. Zhu, and Z.H. Rao, Macro-encapsulated metallic phase change material over 1000°C for high-temperature thermal storage, Sol. Energy Mater. Sol. Cells, 239(2022), art. No. 111655.

[18] Ma BQ, Li JQ, Xu Z, Peng ZJ. Fe-shell/Cu-core encapsulated metallic phase change materials prepared by aerodynamic levitation method. Appl. Energy, 2014, 132: 568

[19] Li XB, Wang HZ, Wang H, et al.. Metallic composites phase-change materials for high-temperature thermal energy storage. ASME 2013 7th International Conference on Energy Sustainability, 2013Minneapolis

[20] Abhat A. Low temperature latent heat thermal energy storage: Heat storage materials. Sol. Energy, 1983, 30(4313

[21] HSC Chemistry, Metso Finland Oy, [2023-04-29], https://www.hsc-chemistry.com.

[22] Smith JF. The Si–V (silicon–vanadium) system: Addendum. Bull. Alloy Ph. Diagr., 1985, 6(3266

[23] R. Novakovic, D. Giuranno, J. Lee, et al., Thermophysical properties of Fe–Si and Cu–Pb melts and their effects on solidification related processes, Metals, 12(2022), No. 2, art. No. 336.

[24] Birchenall CE, Riechman AF. Heat storage in eutectic alloys. Metall. Trans. A, 1980, 11(81415

[25] Jiao JM, Grorud B, Safarian J, Tangstad M. Wettability of molten Fe–Si–B alloy on graphite, Al₂O₃, and h-BN substrates. The Liquid Metal Processing & Casting Conference, 20191Birmingham

[26] Cui SL, Jung IH. Thermodynamic assessments of the Fe–Si–Cr and Fe–Si–Mg systems. Metall. Mater. Trans. A, 2017, 48(94342

[27] Yücel O, Cinar F, Addemir O, Tekin A. The preparation of ferroboron and ferrovanadium by aluminothermic reduction. High Temp. Mater. Process., 1996, 15(1–2103

[28] Weitzer F, Schuster JC, Naka M, Stein F, Palm M. On the reaction scheme and liquidus surface in the ternary system Fe–Si–Ti. Intermetallics, 2008, 16(2273

RIGHTS & PERMISSIONS

The Author(s)