Instantaneous desulfurization of molten steel with varied aluminum and silicon by CaO–Al₂O₃ particles: In situ observation using confocal scanning laser microscopy

Abstract

Desulfurization of CaO–Al₂O₃ particles in molten steel was observed in situ using high-temperature confocal scanning laser microscopy. The effects of the aluminum and silicon contents of molten steel on desulfurization were analyzed. When the total aluminum content in the steel increased from 6 to 1100 ppm, the CaS content in CaO–Al₂O₃ particles increased from 2.1wt% to 84.84wt% after the reaction for 90 s. Furthermore, when the silicon content in the steel increased from 0.01wt% to 2.20wt%, the CaS content in CaO–Al₂O₃ particles increased from 1.53wt% to 79.01wt% after the reaction for 90 s. This indicates that the increase in the aluminum and silicon contents of the steel promoted the desulfurization of CaO–Al₂O₃ particles. A kinetic model was established to predict the CaO–Al₂O₃ particles composition, and the diffusion coefficient of sulfur in CaO–Al₂O₃ particles was 9.375 × 10⁻¹⁰ m²·s⁻¹ at 1600°C, which provided a new method for the calculation of diffusion coefficient.

Keywords

desulfurization / high-temperature confocal scanning laser microscopy / steel / desulfurizer / kinetic model / aluminum / silicon

References

[1] Hao X, Wang XH, Wang WJ. Study on desulfurization ability of CaO–Al₂O₃–SiO₂ and CaO–CaF₂ slags at 1600°C. Steel Res. Int., 2015, 86121455

[2] Matsui A, Uchida YI, Kikuchi N, Miki Y. Effects of temperature and oxygen potential on removal of sulfur from desulfurization slag. ISIJ Int., 2017, 5761012

[3] Lv C, Chen XX, Zhang HW, Zhao HL, Yu LH, Guo WM. Simulation study on fluid flow performance of injection stirring composite process in molten iron desulfurization process. J. Iron Steel Res. Int., 2023, 30122403

[4] Zeng JH, Pan H, Feng YC, Zhang M, Yang SX, Li LG. Study on sulfur control technology for non-oriented electrical steel. Adv. Mater. Res., 2012, 602–604: 351

[5] Xu JF, Huang FX, Wang XH. Desulfurization behavior and mechanism of CaO-saturated slag. J. Iron Steel Res. Int., 2016, 238784

[6] Zhang J, Han LH, Yan BJ. Reassessment of aluminium–oxygen equilibrium in high Al molten steel during aluminium deoxidation process at 1873 K. Metall. Mater. Trans. B, 2022, 5342512

[7] Xu JF, Huang FX, Wang XH, Jing CL. Influence of silicon on desulfurization of Al-killed steel by CaO–Al₂O₃ slag contained FeO and MnO. Steel Res. Int., 2016, 87121694

[8] Cao Q, Nastac L, Baggett AP, Yu QL. Numerical investigation of desulfurization kinetics in gas-stirred ladles by a quick modeling analysis approach. Metall. Mater. Trans. B, 2018, 493988

[9] Yoshikawa T, Motosugi K, Tanaka T, Ueda M. Wetting behaviors of steels containing Al and Al–S on solid CaO. Tetsuto-Hagane, 2011, 977361

[10] C.Y. Lin, N.C. Sheng, S.G. Fan, et al, Effect of rare earth oxides on desulfurization reaction at CaO ceramic surface during smelting of Ni-based superalloy, Appl. Surf. Sci., 620(2023), art. No. 156831.

[11] Roy D, Pistorius PC, Fruehan RJ. Effect of silicon on the desulfurization of Al-killed steels: Part II. experimental results and plant trials. Metall. Mater. Trans. B, 2013, 4451095

[12] Lee S, Min DJ. A study on the formation mechanism of the interfacial layer between solid CaO and molten iron alloys. Met. Mater. Int., 2019, 251248

[13] Wu MH, Ren CY, Ren Y, Zhang LF. In situ observation of the agglomeration of MgO–Al₂O₃ inclusions on the surface of a molten GCr15-bearing steel. Metall. Mater. Trans. B, 2023, 5431159

[14] Gao RZ, Wang LZ, Chen CY, Yang SF, Li X, Zhang Y. Agglomeration behavior of alumina inclusions and calcium aluminate inclusions on molten nickel-based superalloy surface. J. Iron Steel Res. Int., 2023, 30112318

[15] Yin HB, Shibata H, Emi T, Suzuki M. “In-situ” observation of collision, agglomeration and cluster formation of alumina inclusion particles on steel melts. ISIJ Int., 1997, 3710936

[16] Li TT, Yang J. Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel: Combined deoxidizers and microalloying elements. Int. J. Miner. Metall. Mater., 2024, 3161263

[17] Hu JZ, Li S, Zhang J, Ren Y, Zhang LF. Pitting corrosion initiated by SiO₂–MnO–Cr₂O₃–Al₂O₃-based inclusions in a 304 stainless steel. J. Iron Steel Res. Int., 2024, 3192281

[18] Cao L, Wang GC, Xiao YY, Zhao Z, Li JG. In situ observation of the evolution behavior of MnS inclusions in high-Al medium-Mn steel. Metall. Mater. Trans. B, 2024, 552660

[19] Gou L, Liu H, Ren Y, Zhang LF. Concept of inclusion capacity of slag and its application on the dissolution of Al₂O₃, ZrO₂ and SiO₂ inclusions in CaO–Al₂O₃–SiO₂ slag. Metall. Mater. Trans. B, 2023, 5431314

[20] Ren CY, Huang CD, Zhang LF, Ren Y. In situ observation of the dissolution kinetics of Al₂O₃ particles in CaO–Al₂O₃–SiO₂ slags using laser confocal scanning microscopy. Int. J. Miner. Metall. Mater., 2023, 302345

[21] Deng ZY, Zhang XM, Hao GY, Wei CX, Zhu MY. Dissolution behavior of Al₂O₃ inclusions into CaO–MgO–SiO₂–Al₂O₃–TiO₂ system ladle slags. Int. J. Miner. Metall. Mater., 2024, 315977

[22] Zhang LF, Ren Y. Concept of inclusion capacity of slag and its application. Iron Steel, 2023, 58247

[23] Liu H, Li WF, Ren CY, Zhang LF, Ren Y. Inclusion evolution in Al-killed Ca-treated steels at heat treatment temperature in situ observed using confocal scanning laser microscope. Metall. Mater. Trans. B, 2022, 5331323

[24] Chen GJ, Ren Y, Wu MH, Wang WJ, Zhang LF. In-situ observation of the modification behavior of alumina inclusions in a calcium-treated steel. ISIJ Int., 2024, 6481263

[25] Khurana B, Spooner S, Rao MBV, Roy GG, Srirangam P. In situ observation of calcium oxide treatment of inclusions in molten steel by confocal microscopy. Metall. Mater. Trans. B, 2017, 4831409

[26] Ren Y, Zhang LF. In-situ observation of nonmetallic inclusions in steel using confocal scanning laser microscopy: A review. Int. J. Miner. Metall. Mater., 2025, 325975

[27] Chen GJ, Zhang HJ, Ren Y, Zhang LF. Instantaneous transition of composition and morphology of inclusions with an initial Al₂O₃ composition in the molten steel during calcium treatment. Int. J. Miner. Metall. Mater., 2025, 3261383

[28] Sosinsky NJ, Sommerville ID. The composition and temperature dependence of the sulfide capacity of metallurgical slags. Metall. Trans. B, 1986, 172331

[29] Zhang L. Fundamentals and Industrial Practiceof Steel Secondary Refining, 2023, Beijing, Metallurgical Industry Press

[30] Wang JJ, Zhang LF, Cheng G, Ren Q, Ren Y. Dynamic mass variation and multiphase interaction among steel, slag, lining refractory and nonmetallic inclusions: Laboratory experiments and mathematical prediction. Int. J. Miner. Metall. Mater., 2021, 2881298

[31] Wei S. Thermodynamics of Metallurgical Processes, 2010, Beijing, Science Process

[32] She CJ, Peng KY, Sun Y, Ren Y, Zhang LF. Kinetic model of desulfurization during RH refining process. Metall. Mater. Trans. B, 2024, 55192

[33] Diao J, Liu X, Zhang T, Xie B. Mass transfer of phosphorus in high-phosphorus hot-metal refining. Int. J. Miner. Metall. Mater., 2015, 223249

[34] Zhu SJ. Kinetic model of desulphurisation by powder injection and blowing in RH refining of molten steel. Ironmaking Steelmaking, 2000, 272129

[35] Reifferscheid M, Pluschkell W. Development of a numerical model simulating the desulphurisation of liquid steel. Steel Res., 1994, 658309

[36] Muhmood L, Viswanathan NN, Iwase M, Seetharaman S. Evaluating the diffusion coefficient of sulfur in low-silica CaO–SiO₂–Al₂O₃ slag. Metall. Mater. Trans. B, 2011, 422274

[37] Zhu CY, Chen PJ, Li GQ, Luo XY, Zheng W. A mathematical model of desulphurization kinetics for ultra-low-sulfur steels refining by powder injection during RH processing. ISIJ Int., 2016, 5681368

[38] B.C. He, Z.C. Xin, J.S. Zhang, et al., A computational fluid dynamics-thermodynamics coupled approach to simulate desulfurization in ladle furnace based on interface equilibrium assumption, Steel Res. Int., 94(2023), No. 11, art. No. 2200965.

[39] Wu SL, Wang LX, Lu YN, Gu K. Improving the desulphurization in COREX-3000 process by the optimization of chemical compositions of slag. ISIJ Int., 2018, 58112025

RIGHTS & PERMISSIONS

University of Science and Technology Beijing