Extreme removal of fine inclusions from 304 stainless steel via high-temperature supergravity fields

Abstract

The extreme removal of SiO₂ and MnO inclusions in 304 stainless steel in supergravity fields was investigated using an in-house high-temperature supergravity equipment. The influences of the gravity coefficient and separation time on the removal efficiency of the inclusions were studied. After supergravity treatment, the inclusions migrated to the top of the sample and formed large aggregates. Meanwhile, the lower part of the sample was purified considerably and appeared significantly cleaner than the raw material. At the gravity coefficient of 500 and separation time of 600 s, the total oxygen content at the bottom of the sample (position E) decreased from 240 to 28 ppm. This corresponded to a total oxygen removal rate of 88.33%. The volume fraction and number density of inclusions exhibited a gradient distribution along the supergravity direction, with values of 8.5% and 106 mm⁻² at the top of the sample (position A) and 0.06% and 22 mm⁻² at its bottom.

Keywords

304 stainless steel / inclusions / supergravity fields / separation / extreme removal

References

[1] Syamsundar A, Venkata RMB. Achieving excellence in steel quality through reliability. 2018 Annual Reliability and Maintainability Symposium (RAMS), 20181

[2] Knyazeva M, Pohl M. Duplex steels: Part I: Genesis, formation, structure. Metallogr. Microstruct. Anal., 2013, 2(2): 113.

[3] Wang ZL, Bao YP. New steelmaking process based on clean deoxidation technology. Int. J. Miner. Metall. Mater., 2024, 31(6): 1249.

[4] Sims I. The History of stainless steel. Proc. Inst. Civ. Eng. Constr. Mater., 2013, 166(1): 57.

[5] Cunat PJ, Charles J. Stainless steel, from a century to the next. Rev. Met. Paris, 2004, 101(11): 971.

[6] Li TT, Yang J. Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel: Combined deoxidizers and microalloying elements. Int. J. Miner. Metall. Mater., 2024, 31(6): 1263.

[7] J. Zhang, Y. Sun, S.K. Zhang, and L.F. Zhang, Effect of rare earth element yttrium modified inclusion on corrosion properties of stainless steel, Mater. Today Commun., 39(2024), art. No. 109185.

[8] Wang ZL, Bao YP. Development and prospects of molten steel deoxidation in steelmaking process. Int. J. Miner. Metall. Mater., 2024, 31(1): 18.

[9] Gu C, Liu WQ, Lian JH, Bao YP. In-depth analysis of the fatigue mechanism induced by inclusions for high-strength bearing steels. Int. J. Miner. Metall. Mater., 2021, 28(5): 826.

[10] Zhang LF, Thomas BG. State of the art in evaluation and control of steel cleanliness. ISIJ Int., 2003, 43(3): 271.

[11] Wang WJ, Zhang LF, Ren Y, Luo Y, Sun XH. Effect of calcium treatment on non-metallic inclusions in steel during refining process. 12th International Symposium on High-temperature Metallurgical Processing, 2022343.

[12] da Costa e Silva ALV. Non-metallic inclusions in steels–origin and control. J. Mater. Res. Technol., 2018, 7(3): 283.

[13] Duan SC, Lee MJ, Su Y, Mu WZ, Kim DS, Park JH. Evolution of nonmetallic inclusions in 80-t 9CrMoCoB large-scale ingots during electroslag remelting process. Int. J. Miner. Metall. Mater., 2024, 31(7): 1525.

[14] Li YS, Dong YW, Jiang ZH, Tang QF, Du SY, Hou ZW. Influence of rare earth Ce on hot deformation behavior of as-cast Mn18Cr18N high nitrogen austenitic stainless steel. Int. J. Miner. Metall. Mater., 2023, 30(2): 324.

[15] Z.W. Wang, C.B. Shi, S.J. Wang, J. Li, and X. Zhu, Evolution and formation of non-metallic inclusions during electroslag remelting of Ce-bearing 15Cr–22Ni–1Nb austenitic heat-resistant steel, Metals, 12(2022), No. 12, art. No. 2094.

[16] W.T. Qi, Y.F. Guo, C.K. Ma, et al., Multi-stage enhanced removal of inclusions during electroslag remelting process by a static magnetic field, Steel Res. Int., 93(2022), No. 10, art. No. 2200273.

[17] R.I.L. Guthrie and M.M. Isac, Bubble characteristics required for the complete removal of alumina inclusions from steel melts, Steel Res. Int., 95(2024), No. 11, art. No. 2300480.

[18] Wang XF, Yuan SY, Tang FP, Yao WZ, Lin Y, Wang X. A new approach to inclusion removal using fine gas bubbles during IF steel production. Ironmaking Steelmaking, 2021, 48(2): 217.

[19] Cao Q, Nastac L. Numerical modelling of the transport and removal of inclusions in an industrial gas-stirred ladle. Ironmaking Steelmaking, 2018, 45(10): 984.

[20] Rogler JP, Heaslip LJ, Mehrvar M. Inclusion removal in a tundish by gas bubbling. Can. Metall. Q., 2004, 43(3): 407.

[21] Guo XL, Yu JB, Ren XF. et al.. The mechanism of inclusion removal from molten steel by dissolved gas flotation. Ironmaking Steelmaking, 2018, 45(7): 648.

[22] Li SH, Dai YJ, Huang A. et al.. In-situ visualization of high temperature slag corrosion process for alumina-magnesia refractory. Ceram. Int., 2023, 49(23): 39607.

[23] Aneziris CG, Dudczig S, Emmel M, Berek H, Schmidt G, Hubalkova J. Reactive filters for steel melt filtration. Adv. Eng. Mater., 2013, 15(1–2): 46.

[24] Apelian D, Mutharasan R, Ali S. Removal of inclusions from steel melts by filtration. J. Mater. Sci., 1985, 20(10): 3501.

[25] Dai YJ, Voigt C, Storti E. et al.. Open-cell ceramic foam filters for melt filtration: Processing, characterization, improvement and application. J. Mater. Res. Technol., 2024, 32: 3402.

[26] Gupta VK, Jha PK, Jain PK. A novel approach to predict the inclusion removal in a billet caster mold with the use of electromagnetic stirrer. J. Manuf. Process., 2022, 83: 27.

[27] Meng L, Zhong YW, Wang Z. et al.. Supergravity separation for Cu recovery and precious metal concentration from waste printed circuit boards. ACS Sustainable Chem. Eng., 2018, 6(1): 186.

[28] Menges RA, Menges TS, Bertrand GL, Armstrong DW, Spino LA. Extraction of nonionic surfactants from waste water using centrifugal partition chromatography. J. Liq. Chromatogr., 1992, 15(15–16): 2909.

[29] Wang Z, Gao JT, Shi AJ, Meng L, Guo ZC. Recovery of zinc from galvanizing dross by a method of super-gravity separation. J. Alloy. Compd., 2018, 735: 1997.

[30] Cambiella A, Benito JM, Pazos C, Coca J. Centrifugal separation efficiency in the treatment of waste emulsified oils. Chem. Eng. Res. Des., 2006, 84(1): 69.

[31] Li C, Gao JT, Wang Z, Guo ZC. Separation of fine Al₂O₃ inclusion from liquid steel with super gravity. Metall. Mater. Trans. B, 2017, 48(2): 900.

[32] Guo L, Gao JT, Li C, Guo ZC. Removal of fine SiO2 composite inclusions from 304 stainless steel using super-gravity. ISIJ Int., 2020, 60(2): 238.

[33] Shi AJ, Wang Z, Shi CB, Guo L, Guo CQ, Guo ZC. Supergravity-induced separation of oxide and nitride inclusions from inconel 718 superalloy melt. ISIJ Int., 2020, 60(2): 205.

[34] Liu Y, Zhang LF, Duan HJ, Zhang Y, Luo Y, Conejo AN. Extraction, thermodynamic analysis, and precipitation mechanism of MnS–TiN complex inclusions in low-sulfur steels. Metall. Mater. Trans. A, 2016, 47(6): 3015.

[35] Ren WQ, Wang L, Xue ZL. et al.. A thermodynamic assessment of precipitation, growth, and control of MnS inclusion in U75V heavy rail steel. High Temp. Mater. Process., 2021, 40(1): 178.

[36] Wang WL, Zhu CY, Zeng J. et al.. MnS precipitation behavior of high-sulfur microalloyed steel under sub-rapid solidification process. Metall. Mater. Trans. B, 2020, 51(1): 45.

[37] Marler B. On the relationship between refractive index and density for SiO₂-polymorphs. Phys. Chem. Miner., 1988, 16(3): 286.

[38] Yaguchi HCaballero FG. Engineering steels. Encyclopedia of Materials: Metals and Alloys, 2022AmsterdamElsevier153.

[39] Huang Y, Wiezorek JMK, Garner FA. et al.. Microstructural characterization and density change of 304 stainless steel reflector blocks after long-term irradiation in EBR-II. J. Nucl. Mater., 2015, 465: 516.

RIGHTS & PERMISSIONS

University of Science and Technology Beijing