Impact of aggregate segregation on mechanical property and failure mechanism of cemented coarse aggregate backfill

Abstract

Utilizing coarse aggregates containing mining waste rock for backfilling addresses the strength requirements and reduces the expenses associated with binder and solid waste treatment. However, this type of material is prone to aggregate segregation, which can lead to uneven deformation and damage to the backfill. We employed an image-segmentation method that incorporated machine learning to analyze the distribution information of the aggregates on the splitting surface of the test blocks. The results revealed a nonlinear relationship between aggregate segregation and variations in solid concentration (SC) and cement/aggregate ratio (C/A). The SC of 81wt%–82wt% and C/A of 10.00wt%–12.50wt% reflect surges in fluid dynamics, friction effects, and shifts in their dominance. A uniaxial compression experiment, supplemented with additional strain gauges and digital image correlation technology, enabled us to analyze the mechanical properties and failure mechanism under the influence of aggregate segregation. It was found that the uniaxial compressive strength, ranging from 1.75 MPa to 12.65 MPa, is linearly related to both the SC and C/A, and exhibits no significant relationship with the degree of segregation in numerical terms. However, the degree of segregation affects the development trend of the elastic modulus to a certain extent, and a standard deviation of the aggregate area ratio of less than 1.63 clearly indicates a higher elastic modulus. In the pouring direction, the top area of the test block tended to form a macroscopic fracture surface earlier. By contrast, the compressibility of the bottom area was greater than that of the top area. The intensification of aggregate segregation widened the differences in the deformation and failure characteristics between the different areas. For samples with different uniformities, significant differences in local deformation ranging from 515.00 its to 1693.70 its were observed during the stable deformation stage. The extreme unevenness of the aggregate leads to rapid crack penetration in the sample, causing macroscopic tensile failure and resulting in premature structural failure.

Keywords

cemented backfill mining / aggregate segregation / image segmentation / compression deformation / failure mechanism

References

[1] Ruan ZE, Fu H, Wu AX, Bürger R, Wang JD. Utilization of rice straw as an inhibitor of strength deterioration of sulfide-rich cemented paste backfill. J. Mater. Res. Technol., 2023, 24: 833.

[2] S.H. Yin, Y.J. Shao, A.X. Wu, H.J. Wang, X.H. Liu, and Y. Wang, A systematic review of paste technology in metal mines for cleaner production in China, J. Cleaner Prod., 247(2020), art. No. 119590.

[3] G. Mcmahon and S. Moreira, The contribution of the mining sector to socioeconomic and human development, Extr. Ind. Dev. Ser., 30(2014), art. No. 18660.

[4] Ranjith PG, Zhao J, Ju MH, De Silva RVS, Rathnaweera TD, Bandara AKMS. Opportunities and challenges in deep mining: A brief review. Engineering, 2017, 3(4): 546.

[5] Wagner H. Deep mining: A rock engineering challenge. Rock Mech. Rock Eng., 2019, 52(5): 1417.

[6] He MC, Gong WL, Wang J. et al.. Development of a novel energy-absorbing bolt with extraordinarily large elongation and constant resistance. Int. J. Rock Mech. Min. Sci., 2014, 67: 29.

[7] Meesters M, Wostyn P, van Leeuwen J, Behagel JH, Turnhout E. The social licence to operate and the legitimacy of resource extraction. Curr. Opin. Environ. Sustainability, 2021, 49: 7.

[8] A. Buczynska and J. Blachowski, Proposal of a new mining and geology impact factor (MaGIF) index for the study of post-mining environment, CATENA, 232(2023), art. No. 107463.

[9] S.H. Yin, Z.P. Yan, X. Chen, R.F. Yan, D.P. Chen, and J.W. Chen, Mechanical properties of cemented tailings and waste-rock backfill (CTWB) maeerials: Laboratory tests and deep learning modeling, Constr. Build. Mater., 369(2023), art. No. 130610.

[10] Ruan ZE, Wu AX, Wang YM, Wang SY, Wang JD. Multiple response optimization of key performance indicators of cemented paste backfill of total solid waste. Chin. J. Eng., 2022, 44(4): 496

[11] Z.G. Xiu, S.H. Wang, Y.C. Ji, F.L. Wang, F.Y. Ren, and P.Y. Wang, An analytical model for the triaxial compressive stress-strain relationships of cemented pasted backfill (CPB) with different curing time, Constr. Build. Mater., 313(2021), art. No. 125554.

[12] C.C. Qi, J.S. Zheng, X.Y. Yang, Q.S. Chen, and M.T. Wu, Application of deep neural network in the strength prediction of cemented paste backfill based on a global dataset, Constr. Build. Mater., 391(2023), art. No. 131827.

[13] Wang JD, Wu AX, Ruan ZE. et al.. Optimization of parameters for rheological properties and strength of cemented paste backfill blended with coarse aggregates. Minerals, 2022, 12(3): 374.

[14] Xue GL, Yilmaz E, Wang YD. Progress and prospects of mining with backfill in metal mines in China. Int. J. Miner. Metall. Mater., 2023, 30(8): 1455.

[15] Yang LH, Li JC, Liu HB. et al.. Systematic review of mixing technology for recycling waste tailings as cemented paste backfill in mines in China. Int. J. Miner. Metall. Mater., 2023, 30(8): 1430.

[16] J.S. Hao, Z.H. Zhou, Z.H. Chen, Y. Zhou, and J.M. Wang, Damage characterization and microscopic mechanism of steel slag-cemented paste backfill under uniaxial compression, Constr. Build. Mater., 409(2023), art. No. 134175.

[17] Peyronnard O, Benzaazoua M. Alternative by-product based binders for cemented mine backfill: Recipes optimisation using Taguchi method. Miner. Eng., 2012, 29: 28.

[18] Zhang QL, Wu H, Feng Y, Wang DL, Su HB, Li XS. Rheological and physicomechanical properties of rod milling sand-based cemented paste backfill modified by sulfonated naphthalene formaldehyde condensate. Int. J. Miner. Metall. Mater., 2023, 30(2): 225.

[19] J.Y. Wu, H.S. Wong, H. Zhang, Q. Yin, H.W. Jing, and D. Ma, Improvement of cemented rockfill by premixing low-alkalinity activator and fly ash for recycling gangue and partially replacing cement, Cem. Concr. Compos., 145(2024), art. No. 105345.

[20] Yin Q, Wen F, Tao ZG. et al.. Effects of aggregate size distribution and carbon nanotubes on the mechanical properties of cemented gangue backfill samples under true triaxial compression. Int. J. Miner. Metall. Mater., 2025, 32(2): 311.

[21] Z.H. Wang, G.R. Feng, T.Y. Qi, Y.X. Guo, and X.J. Du, Evaluation of static segregation of cemented gangue-fly ash backfill material using electrical resistivity method, Measurement, 154(2020), art. No. 107483.

[22] Han JG, Wang KJ, Wang XH, Monteiro PJM. 2D image analysis method for evaluating coarse aggregate characteristic and distribution in concrete. Constr. Build. Mater., 2016, 127: 30.

[23] Panesar DK, Shindman B. The effect of segregation on transport and durability properties of self consolidating concrete. Cem. Concr. Res., 2012, 42(2): 252.

[24] Ferraris CF, Koehler EACI 238.1R-08: Report on Measurements of Workability and Rheology of Fresh Concrete, 2008Northern IrelandAmerican Concrete Institute

[25] Juradin S, Baloević G, Harapin A. Impact of vibrations on the final characteristics of normal and self-compacting concrete. Mat. Res., 2014, 17(1): 178.

[26] Li JJ, Cao S, Yilmaz E, Liu YP. Compressive fatigue behavior and failure evolution of additive fiber-reinforced cemented tailings composites. Int. J. Miner. Metall. Mater., 2022, 29(2): 345.

[27] Navarrete I, Lopez M. Understanding the relationship between the segregation of concrete and coarse aggregate density and size. Constr. Build. Mater., 2017, 149: 741.

[28] W.S. Yan, W. Cui, and L. Qi, Effect of aggregate gradation and mortar rheology on static segregation of self-compacting concrete, Constr. Build. Mater., 259(2020), art. No. 119816.

[29] Zhu WZ, Gibbs JC, Bartos PJM. Uniformity of in situ properties of self-compacting concrete in full-scale structural elements. Cem. Concr. Compos., 2001, 23(1): 57.

[30] N. Yao, Y.D. Liu, Q.H. Wang, et al., Experimental study on delamination and strength characteristics of cemented waste rock backfill, Constr. Build. Mater., 365(2023), art. No. 130058.

[31] G. Chen, N. Yao, Y.C. Ye, F.H. Fu, N.Y. Hu, and Z. Zhang, Study on the settlement and delamination mechanism and acoustic emission characteristics of mixed aggregate cemented backfill, Constr. Build. Mater., 408(2023), art. No. 133635.

[32] J.Y. Wu, H.W. Jing, Y. Gao, Q.B. Meng, Q. Yin, and Y. Du, Effects of carbon nanotube dosage and aggregate size distribution on mechanical property and microstructure of cemented rockfill, Cem. Concr. Compos., 127(2022), art. No. 104408.

[33] Z.H. Wang, T.Y. Qi, G.R. Feng, et al., Electrical resistivity method to appraise static segregation of gangue-cemented paste backfill in the pipeline, Int. J. Press. Vessels Pip., 192(2021), art. No. 104385.

[34] Zhao X, Fourie A, Qi CC. Mechanics and safety issues in tailing-based backfill: A review. Int. J. Miner. Metall. Mater., 2020, 27(9): 1165.

[35] Li YL, Guo SJ, Yang RS, Xie LY, Lu SH. Effects of gangue particle-size gradation on damage and failure behavior of cemented backfill under uniaxial compression. Int. J. Miner. Metall. Mater, 2025, 32(7): 1483.

[36] Fuller WB, Thompson SE. The laws of proportioning concrete. Trans. Am. Soc. Civ. Eng., 1907, 59(2): 67.

[37] Talbot AN, Richart FEThe Strength of Concrete, Its Relation to The Cement Aggregates and Water, 1923Champaign-UrbanaUniversity of Illinois Engineering Experiment Station Bulletin

[38] Bolomey J. Granulation et prévision de la résistance probable des bétons. Travaux, 1935, 19(30): 228

[39] ASTM International, ASTM C109/C109M-21Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens), 2021West ConshohockenASTM International

[40] ASTM International, ASTM Standard C31/C31M–22Stnndard Practice for Making and Curing Concrete Test Specimens in the Field, 2022West ConshohockenASTM International

[41] Baddeley A, Jensen EBVStereology for Statisticians, 2004Boca RatonCRC Press.

[42] Mouton PRPrinciples and Practices of Unbiased Stereology: An introduction for Bioscientists, 2003ChicagoThe University of Chicago Press

[43] Fang CX, Labi S. Image-processing technology to evaluate static segregation resistance of hardened self-consolidating concrete. Transp. Res. Rec. J. Transp. Res. Board, 2007, 2020(1): 1.

[44] Arganda-Carreras I, Kaynig V, Rueden C. et al.. Trainable Weka Segmentation: A machine learning tool for microscopy pixel classification. Bioinformatics, 2017, 33(15): 2424.

[45] Tattersall GH, Banfill PFGThe Rheology of Fresh Concrete, 1983LondonPitman Books Limited

[46] Beris AN, Tsamopoulos JA, Armstrong RC, Brown RA. Creeping motion of a sphere through a Bingham plastic. J. FluidMech., 1985, 158: 219.

[47] Rosquoët F, Alexis A, Khelidj A, Phelipot A. Experimental study of cement grout Rheological behavior and sedimentation. Cem. Concr. Res., 2003, 33(5): 713.

[48] Yammine J, Chaouche M, Guerinet M, Moranville M, Roussel N. From ordinary rhelogy concrete to self compacting concrete: A transition between frictional and hydrodynamic interactions. Cem. Concr. Res., 2008, 38(7): 890.

[49] Krieger IM, Dougherty TJ. A mechanism for non-Newtonian flow in suspensions of rigid spheres. Trans. Soc. Rheol., 1959, 3(1): 137.

[50] Lowke D. Thixotropy of SCC—A model describing the effect of particle packing and superplasticizer adsorption on thixotropic structural build-up of the mortar phase based on interparticle interactions. Cem. Concr. Res., 2018, 104: 94.

[51] M.K. Mohan, A.V. Rahul, K. Van Tittelboom, and G. De Schutter, Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content, Cem. Concr. Res., 139(2021), art. No. 106258.

[52] TSE, TS 500-T3Requirements for Design and Construction of Reinforced Concrete Structures, 2014AnkaraTurkish Standards Institution

[53] CEN, EN 206-1Concrete-Part 1: Specification, Performance, Production and Conformity, 2000BrusselsEuropean Committee for Standardization

[54] Ersoy U, Özcebe G, Tankut TReinforced Concrete, 2010AnkaraMETU Publishing

[55] Wang SS, Yang RS, Li YL, Yue ZW. Effects of cement content, polypropylene fiber length and dosage on fluidity and mechanical properties of fiber-toughened cemented aeolian sand backfill. Int. J. Miner. Metall. Mater., 2024, 31(11): 2404.

[56] D. Alfonso, M. Dugarte, J. Carrillo, and C.A. Arteta, Effect of aggregate type on the elastic modulus and compressive behavior of concrete: A case study in Colombia, Constr. Build. Mater., 411(2024), art. No. 134131.

[57] ACI Committee, ACI 318-11Building Code Requirements for Structural Concrete, 2019Northern IrelandAmerican Concrete Institute

[58] NSR, NSR-10:ReglamentoColombiano De Construcción Sismo Resistente, 2010BogotaNSR

[59] CSA, CSA-A23Design of Concrete Structures, 2004

[60] AASHTO, LRFD-SI-1998LRFD Bridge Design Specifications SI Units (Second Edition), 1998WashingtonAmerican Association of State Highway and Transportation Officials

[61] MFOM,EHE-98Instruction de Hormigón Estructural (Spanish Structural Concrete Code), 1998MadridSpanish Ministry of Public Works, Standing Committee on Concrete

[62] Ouyang XW, Koleva DA, Ye G, van Breugel K. Understanding the adhesion mechanisms between CSH and fillers. Cem Concr. Res., 2017, 100: 275.

[63] K.M. Pan, Z.M. Wu, R.C. Yu, and X.X. Zhang, Study on the dynamic fracturing characteristics of aggregate-mortar interface under various loading rates using DIC, Constr. Build. Mater., 403(2023), art. No. 133069.

[64] Giaccio G, Zerbino R. Failure mechanism of concrete combined effects of coarse aggregates and strength level. Adv. Cem. Based Mater., 1998, 7(2): 41.

[65] H. Zhu, Y.C. Wang, M. Mehthel, et al., Development of durable engineered cementitious composites using local ingredients, Cem. Concr. Res., 173(2023), art. No. 107298.

RIGHTS & PERMISSIONS

University of Science and Technology Beijing