Novel non-equilibrium partitioning model and a developed strong and ductile Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy for selective laser melting

Abstract

Strong and ductile Al alloys and their suitable design strategy have long been desired in selective laser melting (SLM). This work reports a non-equilibrium partitioning model and a correspondingly designed Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy. This model effectively quantifies the influence of Mg and Si on hot cracking in aluminum alloy by considering the non-equilibrium partitioning under high cooling rates in SLM. The designed Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy exhibits no hot cracks and achieves a remarkably enhanced strength–ductility synergy (a yield strength of (412 ± 8) MPa and a uniform elongation of (15.6 ± 0.6)%), superior to previously reported Al–Mg–Sc–Zr and Al–Mn alloys. A tensile cracking model is proposed to explore the origin of the improved ductility. Both the non-equilibrium partitioning model and the novel Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy offers a promising opportunity for producing highly reliable aluminum parts through SLM.

Keywords

aluminum alloy / mechanical property / selective laser melting / non-equilibrium partitioning

References

[1] N.T. Aboulkhair, M. Simonelli, L. Parry, I. Ashcroft, C. Tuck, and R. Hague, 3D printing of aluminium alloys: Additive manufacturing of aluminium alloys using selective laser melting, Prog. Mater. Sci., 106(2019), art. No. 100578.

[2] LinYL, WangD, YangC, ZhangWW, WangZ. An Al–Al interpenetrating-phase composite by 3D printing and hot extrusion. Int. J. Miner. Metall. Mater., 2023, 304678.

[3] MartinJH, YahataBD, HundleyJM, MayerJA, SchaedlerTA, PollockTM. 3D printing of high-strength aluminium alloys. Nature, 2017, 5497672365.

[4] T.S. Liu, P. Chen, F. Qiu, et al., Review on laser directed energy deposited aluminum alloys, Int. J. Extrem. Manuf., 6(2024), No. 2, art. No. 022004.

[5] Z.Z. Liu, Q.H. Zhou, X.K. Liang, et al., Alloy design for laser powder bed fusion additive manufacturing: A critical review, Int. J. Extrem. Manuf., 6(2024), No. 2, art. No. 022002.

[6] WuSH, YangC, ZhangP, et al.. Review of Sc microalloying effects in Al–Cu alloys. Int. J. Miner. Metall. Mater., 2024, 3151098.

[7] SpieringsAB, DawsonK, KernK, PalmF, WegenerK. SLM-processed Sc- and Zr- modified Al–Mg alloy: Mechanical properties and microstructural effects of heat treatment. Mater. Sci. Eng. A, 2017, 701264.

[8] LiRD, WangMB, LiZM, CaoP, YuanTC, ZhuHB. Developing a high-strength Al–Mg–Si–Sc–Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms. Acta Mater., 2020, 19383.

[9] ShaJW, LiMX, YangLZ, et al.. Si-assisted solidification path and microstructure control of 7075 aluminum alloy with improved mechanical properties by selective laser melting. Acta Metall. Sin. Engl. Lett., 2022, 3591424.

[10] G. Wang, S. Zhang, T. Liu, F. Peng, and J.Z. Long, The intrinsically quasi-isotropic tensile properties of as-fabricated Al–Mg–Si–Sc–Zr alloy produced by selective laser melting, J. Alloy. Compd., 947(2023), art. No. 169707.

[11] KouS. A criterion for cracking during solidification. Acta Mater., 2015, 88366.

[12] FlemingsMC. Solidification processing. Metall. Trans., 1974, 5102121.

[13] HeardDW, GauvinR, BrochuM. Non-equilibrium solute partitioning in a laser re-melted Al–Li–Cu alloy. Acta Mater., 2013, 61197432.

[14] AzizMJ, TsaoJY, ThompsonMO, PeercyPS, WhiteCW. Solute trapping: Comparison of theory with experiment. Phys. Rev. Lett., 1986, 56232489.

[15] OkamotoH, SchlesingerME, MuellerEMAl (Aluminum) Binary Alloy Phase Diagrams, 2016, Ohio. ASM International. 113.

[16] NeumannG, TuijnCNeumannG, TuijnC. Chapter 3 - Self-diffusion and impurity diffusion in group III metals. Pergamon Materials Series, Volume 14, 2008121

[17] LiuJW, KouS. Crack susceptibility of binary aluminum alloys during solidification. Acta Mater., 2016, 11084.

[18] LuoSS, YouZS, LuL. Intrinsic fracture toughness of bulk nanostructured Cu with nanoscale deformation twins. Scripta Mater., 2017, 1331.

[19] SafariJ, Delshad ChermahiniM, AkbariGH. The effect of Mg content on microstructure and mechanical properties of Al–xMg/5Al₂O₃ nanocomposite prepared by mechanical alloying. Powder Technol., 2013, 2347.

[20] KimuraT, NakamotoT, OzakiT, SugitaK, MizunoM, ArakiH. Microstructural formation and characterization mechanisms of selective laser melted Al–Si–Mg alloys with increasing magnesium content. Mater. Sci. Eng. A, 2019, 754786.

[21] BiJ, LeiZL, ChenYB, et al.. Microstructure, tensile properties and thermal stability of AlMgSiScZr alloy printed by laser powder bed fusion. J. Mater. Sci. Technol., 2021, 69200.

[22] GengYX, TangH, XuJH, et al.. Influence of process parameters and aging treatment on the microstructure and mechanical properties of AlSi₈Mg₃ alloy fabricated by selective laser melting. Int. J. Miner. Metall. Mater., 2022, 2991770.

[23] SpieringsAB, DawsonK, HeelingT, et al.. Microstructural features of Sc- and Zr-modified Al–Mg alloys processed by selective laser melting. Mater. Des., 2017, 11552.

[24] B.Q. Li, M.L. Sui, B. Li, E. Ma, and S.X. Mao, Reversible twinning in pure aluminum, Phys. Rev. Lett., 102(2009), No. 20, art. No. 205504.

[25] ZouB, ChenZQ, LiuCH, ChenJH. Vacancy–Mg complexes and their evolution in early stages of aging of Al–Mg based alloys. Appl. Surf. Sci., 2014, 29850.

[26] ThijsL, KempenK, KruthJP, Van HumbeeckJ. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi₁₀Mg powder. Acta Mater., 2013, 6151809.

[27] YangCL, ZhangZJ, ZhangP, ZhangZF. The premature necking of twinning-induced plasticity steels. Acta Mater., 2017, 1361.

[28] AboulkhairNT, MaskeryI, TuckC, AshcroftI, EverittNM. The microstructure and mechanical properties of selectively laser melted AlSi₁₀Mg: The effect of a conventional T6-like heat treatment. Mater. Sci. Eng. A, 2016, 667139.

[29] DelahayeJ, TchuindjangJT, Lecomte-BeckersJ, RigoO, HabrakenAM, MertensA. Influence of Si precipitates on fracture mechanisms of AlSi₁₀Mg parts processed by Selective Laser Melting. Acta Mater., 2019, 175160.

[30] E. Pourkhorshid, P. Rometsch, and X.G. Chen, Evolution of mechanical properties and microstructure of selective laser melted AlSi₁₀MgMn alloy with different post heat treatments, Mater. Sci. Eng. A, 915(2024), art. No. 147249.

[31] A. Yu Churyumov, A.V. Pozdniakov, A.S. Prosviryakov, et al., Microstructure and mechanical properties of a novel selective laser melted Al–Mg alloy with low Sc content, Mater. Res. Express, 6(2019), No. 12, art. No. 126595.

[32] J. Bi, Z.L. Lei, Y.B. Chen, et al., Effect of Al₃(Sc,Zr) and Mg₂Si precipitates on microstructure and tensile properties of selective laser melted Al–14.1Mg–0.47Si–0.31Sc–0.17Zr alloy, Intermetallics, 123(2020), art. No. 106822.

[33] P.D. He, R.F. Webster, V. Yakubov, et al., Fatigue and dynamic aging behavior of a high strength Al-5024 alloy fabricated by laser powder bed fusion additive manufacturing, Acta Mater., 220(2021), art. No. 117312.

[34] X.F. Shen, Z.Y. Cheng, C.G. Wang, et al., Effect of heat treatments on the microstructure and mechanical properties of Al–Mg–Sc–Zr alloy fabricated by selective laser melting, Opt. Laser Technol., 143(2021), art. No. 107312.

[35] NieXJ, ZhangH, ZhuHH, HuZH, QiY, ZengXY. On the role of Zr content into Portevin-Le Chatelier (PLC) effect of selective laser melted high strength Al–Cu–Mg–Mn alloy. Mater. Lett., 2019, 2485.

[36] WangYF, LinX, KangN, WangZH, LiuYX, HuangWD. Influence of post-heat treatment on the microstructure and mechanical properties of Al–Cu–Mg–Zr alloy manufactured by selective laser melting. J. Mater. Sci. Technol., 2022, 11135.

[37] H.L. Zhang, Z.W. Chen, and W.J. Song, Influence of direct aging treatment on microstructure and mechanical properties of Al–4Cu–2Mg–0.3Sc–0.7Zr alloy processed by selective laser melting, Mater. Charact., 217(2024), art. No. 114429.

[38] ZhangSM, ZhangSH, LiFD, et al.. Study on defects of Zr-containing Al–Cu–Mn–Mg alloys manufactured by selective laser melting. J. Mater. Res. Technol., 2024, 29119.

[39] JiaQB, ZhangF, RometschP, et al.. Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al–Mn–Sc alloy fabricated by selective laser melting. Acta Mater., 2020, 193239.

[40] YuJ, GengYX, ChenYK, et al.. High-strength and thermally stable TiB₂-modified Al–Mn–Mg–Er–Zr alloy fabricated via selective laser melting. Int. J. Miner. Metall. Mater., 2024, 31102221.

[41] LeBrunT, NakamotoT, HorikawaK, KobayashiH. Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel. Mater. Des., 2015, 8144.

[42] YadollahiA, ShamsaeiN, ThompsonSM, ElwanyA, BianLK. Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17–4 PH stainless steel. Int. J. Fatigue, 2017, 94218.

[43] HsuTH, ChangYJ, HuangCY, et al.. Microstructure and property of a selective laser melting process induced oxide dispersion strengthened 17–4PH stainless steel. J. Alloy. Compd., 2019, 80330.

[44] KongDC, DongCF, NiXQ, et al.. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes. J. Mater. Sci. Technol., 2019, 3571499.

[45] LiB, QianB, XuY, LiuZY, ZhangJR, XuanFZ. Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: Formation mechanism and strengthening effect. Mater. Sci. Eng. A, 2019, 745495.

[46] YinYJ, SunJQ, GuoJ, KanXF, YangDC. Mechanism of high yield strength and yield ratio of 316L stainless steel by additive manufacturing. Mater. Sci. Eng. A, 2019, 744773.

[47] VranckenB, ThijsL, KruthJP, Van HumbeeckJ. Heat treatment of Ti6Al4V produced by selective laser melting: Microstructure and mechanical properties. J. Alloy. Compd., 2012, 541177.

[48] Z.G. Zhu, P. Kumar, F.L. Ng, H.L. Seet, U. Ramamurty, and S.M.L. Nai, Heat treatment effect on the microstructure and elevated temperature tensile property of the Ti6242S alloy fabricated via laser powder bed fusion, J. Alloy. Compd., 925(2022), art. No. 166656.

[49] PerevoshchikovaN, RigaudJ, ShaY, et al.. Optimisation of selective laser melting parameters for the Ni-based superalloy IN-738 LC using Doehlert’s design. Rapid Prototyping J., 2017, 235881.

[50] H. Wang, X. Zhang, G.B. Wang, et al., Selective laser melting of the hard-to-weld IN738LC superalloy: Efforts to mitigate defects and the resultant microstructural and mechanical properties, J. Alloy. Compd., 807(2019), art. No. 151662.

[51] T.D. McLouth, D.B. Witkin, G.E. Bean, et al., Variations in ambient and elevated temperature mechanical behavior of IN718 manufactured by selective laser melting via process parameter control, Mater. Sci. Eng. A, 780(2020), art. No. 139184.

[52] ZhangMH, ZhangBC, WenYJ, QuXH. Research progress on selective laser melting processing for nickel-based superalloy. Int. J. Miner. Metall. Mater., 2022, 293369.

[53] LiuJW, KouSD. Susceptibility of ternary aluminum alloys to cracking during solidification. Acta Mater., 2017, 125513.

[54] Y.X. Geng, Y.M. Wang, J.H. Xu, et al., A high-strength AlSiMg1.4 alloy fabricated by selective laser melting, J. Alloy. Compd., 867(2021), art. No. 159103.

[55] C.Q. Zhang, L.J. Chai, Y.Z. Liu, et al., Correlating microstructural features with improved wear and corrosion resistance of laser surface remelted A356 alloy at different scanning speeds, Mater. Charact., 202(2023), art. No. 113021.

[56] SlaughterWS, FleckNA. Compressive fatigue of fibre composites. J. Mech. Phys. Solids, 1993, 4181265.

[57] LiuG, ZhangGJ, DingXD, SunJ, ChenKH. The influences of multiscale-sized second-phase particles on ductility of aged aluminum alloys. Metall. Mater. Trans. A, 2004, 3561725.

[58] LiuG, SunJ, NanCW, ChenKH. Experiment and multiscale modeling of the coupled influence of constituents and precipitates on the ductile fracture of heat-treatable aluminum alloys. Acta Mater., 2005, 53123459.

RIGHTS & PERMISSIONS

University of Science and Technology Beijing