Design of PbS quantum dots–PbMoO₄–MoS₂ ternary nanocomposites for highly selective NO₂ sensing at room temperature

Abstract

Traditional resistive semiconductor gas sensors suffer from high operating temperatures and poor selectivity. Thus, to address these issues, a highly selective nitrogen dioxide (NO₂) sensor based on lead sulfide (PbS) quantum dots (QDs)–lead molybdate (PbMoO₄)–molybdenum disulfide (MoS₂) ternary nanocomposites operating at room temperature was fabricated herein. The ternary nanocomposites were synthesized using an in situ method, yielding PbS QDs with an average size of ∼10 nm and PbMoO₄ nanoparticles in the 10- to 20-nm range, uniformly distributed on ultrathin MoS₂ nanosheets with an average thickness of ∼7 nm. The optimized sensor demonstrated a significant improvement in response to 1 ppm NO₂ at 25°C, achieving a response of 44.5%, which was approximately five times higher than that of the pure MoS₂-based sensor (8.5%). The sensor also achieved relatively short response/recovery times and full recovery properties. Notably, the optimal sensor displayed extraordinary selectivity toward NO₂, showing negligible responses to different interfering gases. Density functional theory (DFT) calculations were conducted to elucidate the underlying sensing mechanism, which was attributed to the enhanced specific surface area, the receptor function of both PbS QDs and PbMoO₄ nanoparticles, and the transducer function of MoS₂ nanosheets.

Keywords

lead sulfide quantum dots / lead molybdate / molybdenum disulfide / nitrogen dioxide / selective sensing / room temperature

References

[1] HanD, LiuXR, LiDH, et al.. NO₂ gas sensor with high selectivity and fast response based on Pt-loaded nanoporous GaN. Int. J. Miner. Metall. Mater., 2025, 324964.

[2] AziziA, DoganM, LongH, et al.. High-performance atomically-thin room-temperature NO₂ sensor. Nano Lett., 2020, 2086120.

[3] B.X. Yang, N.V. Myung, and T.T. Tran, 1D metal oxide semiconductor materials for chemiresistive gas sensors: A review, Adv. Electron. Mater., 7(2021), No. 9, art. No. 2100271.

[4] Q.T. Li, W. Zeng, and Y.Q. Li, Metal oxide gas sensors for detecting NO₂ in industrial exhaust gas: Recent developments, Sens. Actuators B, 359(2022), art. No. 131579.

[5] G.D. Li, Y.B. Shen, S.K. Zhao, et al., Novel sensitizer Au_xSn modify rGO–SnO₂ nanocomposites for enhancing detection of sub-ppm H₂, Sens. Actuators B, 373(2022), art. No. 132656.

[6] F.L. Meng, X.Z. Li, Z.Y. Yuan, Y.F. Lei, T.Y. Qi, and J. Li, ppb-level xylene gas sensors based on Co₃O₄ nanoparticle-coated reduced graphene oxide (rGO) nanosheets operating at low temperature, IEEE Trans. Instrum. Meas., 70(2021), art. No. 9511510.

[7] S.K. Zhao, Y.B. Shen, P.F. Zhou, et al., Enhanced NO₂ sensing performance of ZnO nanowires functionalized with ultra-fine In₂O₃ nanoparticles, Sens. Actuators B, 308(2020), art. No. 127729.

[8] Y. Niu, J.W. Zeng, X.C. Liu, et al., A photovoltaic self-powered gas sensor based on all-dry transferred MoS₂/GaSe heterojunction for ppb-level NO₂ sensing at room temperature, Adv. Sci., 8(2021), No. 14, art. No. 2100472.

[9] LiYL, YuXY, ZhouYJ, LinY, WuY. Nanostructured ZnO/BiVO₄ I-scheme heterojunctions for piezocatalytic degradation of organic dyes via harvesting ultrasonic vibration energy. Int. J. Miner. Metall. Mater., 2025, 322488.

[10] YuanJS, ZhangY, ZhangXY, ZhangJJ, ZhangSG. N-doped graphene quantum dot-decorated N-TiO₂/P-doped porous hollow g-C₃N₄ nanotube composite photocatalysts for antibiotic photodegradation and H₂ production. Int. J. Miner. Metall. Mater., 2024, 311165.

[11] MoreelsI, JustoY, De GeyterB, HaustraeteK, MartinsJC, HensZ. Size-tunable, bright, and stable PbS quantum dots: A surface chemistry study. ACS Nano, 2011, 532004.

[12] J.Y. Liu, Z.X. Hu, Y.Z. Zhang, et al., MoS₂ nanosheets sensitized with quantum dots for room-temperature gas sensors, Nano Micro Lett., 12(2020), No. 1, art. No. 59.

[13] WangD, PuXX, YuX, et al.. Controlled preparation and gas sensitive properties of two-dimensional and cubic structure ZnSnO₃. J. Colloid Interface Sci., 2022, 6081074.

[14] ThirumalairajanS, GirijaK, MastelaroVR, PonpandianN. Surface morphology-dependent room-temperature LaFeO₃ nanostructure thin films as selective NO₂ gas sensor prepared by radio frequency magnetron sputtering. ACS Appl. Mater. Interfaces, 2014, 61613917.

[15] H. Naderi, S. Hajati, M. Ghaedi, K. Dashtian, and M.M. Sabzehmeidani, Sensitive, selective and rapid ammonia-sensing by gold nanoparticle-sensitized V₂O₅/CuWO₄ heterojunctions for exhaled breath analysis, Appl. Surf. Sci., 501(2020), art. No. 144270.

[16] Y.Y. Yin, Y.B. Shen, P.F. Zhou, et al., Fabrication, characterization and n-propanol sensing properties of perovskite-type ZnSnO3 nanospheres based gas sensor, Appl. Surf. Sci., 509(2020), art. No. 145335.

[17] DattaRS, OuJZ, MohiuddinM, et al.. Two dimensional PbMoO₄: A photocatalytic material derived from a naturally non-layered crystal. Nano Energy, 2018, 49237.

[18] W.B. Qin, Z.Y. Yuan, Y.B. Shen, R.Z. Zhang, and F.L. Meng, Phosphorus-doped porous perovskite LaFe_1−xP_xO_3−δ nanosheets with rich surface oxygen vacancies for ppb level acetone sensing at low temperature, Chem. Eng. J., 431(2022), art. No. 134280.

[19] ZhangFD, LiuKW, LiHL, et al.. MoO₃ nanorods decorated by PbMoO₄ nanoparticles for enhanced trimethylamine sensing performances at low working temperature. ACS Appl. Mater. Interfaces, 2022, 142124610.

[20] TianX, CuiXX, XiaoYW, ChenT, XiaoXC, WangYD. Pt/MoS₂/polyaniline nanocomposite as a highly effective room temperature flexible gas sensor for ammonia detection. ACS Appl. Mater. Interfaces, 2023, 1579604.

[21] QinZY, OuyangC, ZhangJ, et al.. 2D WS₂ nanosheets with TiO₂ quantum dots decoration for high-performance ammonia gas sensing at room temperature. Sens. Actuators B, 2017, 2531034.

[22] J.Z. Bai, Y.B. Shen, S.K. Zhao, et al., Flower-like MoS₂ hierarchical architectures assembled by 2D nanosheets sensitized with SnO₂ quantum dots for high-performance NH₃ sensing at room temperature, Sens. Actuators B, 353(2022), art. No. 131191.

[23] J.Z. Bai, S.K. Zhao, W.X. Wang, et al., In-situ construction of SnO₂ nanolayer–SnS₂ nanosheets heterostructures for enhanced NO₂ sensing at room temperature and their DFT investigation, J. Alloy. Compd., 1008(2024), art. No. 176616.

[24] WuYY, ChengXL, ZhangXF, et al.. High efficient and selective removal of Pb²⁺ through formation of lead molybdate on α-MoO₃ porous nanosheets array. J. Colloid Interface Sci., 2017, 49180.

[25] D.O. Li, M.S. Gilliam, A. Debnath, et al., Interaction of Pb²⁺ ions in water with two-dimensional molybdenum disulfide, J. Phys. Mater., 3(2020), No. 2, art. No. 024007.

[26] Z.T. Lin, W.G. Liu, S.B. Tian, K. Zhu, Y. Huang, and Y. Yang, Thermal expansion coefficient of few-layer MoS₂ studied by temperature-dependent Raman spectroscopy, Sci. Rep., 11(2021), art. No. 7037.

[27] PhuruangratA, KuntalueB, ArtklaS, et al.. Effect of lead salts on phase, morphologies and photoluminescence of nanocrystalline PbMoO₄ and PbWO₄ synthesized by microwave radiation. Mater. Sci. Pol., 2016, 343529.

[28] DeliceS, IsikM, GasanlyNM. Linear and nonlinear optical characteristics of PbMoO₄ single crystal for optoelectronic applications. J. Mater. Sci. Mater. Electron., 2022, 332822281.

[29] YuanJS, ZhangY, ZhangXY, ZhaoL, ShenHL, ZhangSG. Template-free synthesis of core–shell Fe₃O₄@MoS₂@mesoporous TiO₂ magnetic photocatalyst for wastewater treatment. Int. J. Miner. Metall. Mater., 2023, 301177.

[30] YangHZ, HeTP, WuYH, et al.. Magnetically recyclable PbMoO₄/BC/Fe₃O₄ composite for tetracycline removal: Fabrication, performance, and mechanism. J. Mater. Sci., 2022, 574821853.

[31] JaramilloTF, JørgensenKP, BondeJ, NielsenJH, HorchS, ChorkendorffI. Identification of active edge sites for electrochemical H₂ evolution from MoS₂ nanocatalysts. Science, 2007, 3175834100.

[32] Y.C. Yang, J.P. Mao, D.M. Yin, et al., Synergy of S-vacancy and heterostructure in BiOCl/Bi₂S_3−x boosting room-temperature NO₂ sensing, J. Hazard. Mater., 455(2023), art. No. 131591.

[33] XinX, ZhangY, GuanXX, et al.. Enhanced performances of PbS quantum-dots-modified MoS₂ composite for NO₂ detection at room temperature. ACS Appl. Mater. Interfaces, 2019, 1199438.

[34] ZhongYJ, LiWW, ZhaoXL, et al.. High-response room-temperature NO₂ sensor and ultrafast humidity sensor based on SnO₂ with rich oxygen vacancy. ACS Appl. Mater. Interfaces, 2019, 111413441.

[35] B. Li, L. Jiang, X. Li, et al., Preparation of monolayer MoS₂ quantum dots using temporally shaped femtosecond laser ablation of bulk MoS₂ targets in water, Sci. Rep., 7(2017), No. 1, art. No. 11182.

[36] A. Mosahebfard, R. Safaiee, and M.H. Sheikhi, Density functional theory of influence of methane adsorption on the electronic properties of a PbS cluster, Pramana, 93(2019), No. 1, art. No. 9.

[37] GrajciarL. PbS clusters embedded in sodalite zeolite cavities of different compositions: Unraveling the structural evolution and optical properties using ab initio calculations. J. Phys. Chem. C, 2016, 1204727050.

[38] B.L. Li, Q. Zhou, R.C. Peng, Y.M. Liao, and W. Zeng, Adsorption of SF₆ decomposition gases (H₂S, SO₂, SOF₂ and SO₂F₂) on Sc-doped MoS₂ surface: A DFT study, Appl. Surf. Sci., 549(2021), art. No. 149271.

[39] TangYT, ZhaoYN, LiuH. Room-temperature semiconductor gas sensors: Challenges and opportunities. ACS Sens., 2022, 7123582.

[40] ZhouLC, HuZX, LiHY, et al.. Template-free construction of tin oxide porous hollow microspheres for room-temperature gas sensors. ACS Appl. Mater. Interfaces, 2021, 132125111.

[41] X.W. Chen, T. Wang, J. Shi, et al., A novel artificial neuronlike gas sensor constructed from CuS quantum dots/Bi₂S₃ nanosheets, Nano-Micro Lett., 14(2021), No. 1, art. No. 8.

[42] SinghS, SattigeriRM, KumarS, JhaPK, SharmaS. Superior room-temperature ammonia sensing using a hydrothermally synthesized MoS₂/SnO₂ composite. ACS Omega, 2021, 61711602.

[43] J.Z. Bai, Y.B. Shen, W.X. Wang, et al., Highly sensitive room-temperature ammonia sensor based on PbS quantum dots modified SnS₂ nanosheets and theoretical investigation on its sensing mechanism by DFT calculation, Appl. Surf. Sci., 680(2025), art. No. 161324.

[44] YinYY, ShenYB, ZhaoSK, et al.. Enhanced detection of ppb-level NO₂ by uniform Pt-doped ZnSnO₃ nanocubes. Int. J. Miner. Metall. Mater., 2022, 2961295.

[45] H.N. Bai, H. Guo, C. Feng, et al., Light-activated ultrasensitive NO₂ gas sensor based on heterojunctions of CuO nanospheres/MoS₂ nanosheets at room temperature, Sens. Actuators B, 368(2022), art. No. 132131.

[46] Y. Zhou, Z.H. Hu, H.C. Zhao, Y.J. Wang, J. Li, and C. Zou, Two-dimensional black phosphorus/tin oxide heterojunctions for high-performance chemiresistive H₂S sensing, Anal. Chim. Acta, 1245(2023), art. No. 340825.

[47] LiangZP, WangMY, ZhangXZ, et al.. A 2D–0D–2D sandwich heterostructure toward high-performance room-temperature gas sensing. ACS Nano, 2024, 1843669.

[48] NamKM, ParkHS, LeeHC, MeekinsBH, LeonardKC, BardAJ. Compositional screening of the Pb–Bi–Mo–O system. spontaneous formation of a composite of p-PbMoO₄ and n-Bi₂O₃ with improved photoelectrochemical efficiency and stability. J. Phys. Chem. Lett., 2013, 4162707.

[49] G.Q. Feng, S.Q. Wang, S.H. Wang, et al., Ultra-sensitive trace NO₂ detection based on quantum dots-sensitized few-layer MXene: A novel convincing insight into dynamic gas-sensing mechanism, Sens. Actuators B, 400(2024), art. No. 134852.

RIGHTS & PERMISSIONS

University of Science and Technology Beijing