High toughness and strong electromagnetic shielding properties of PAM/PEG dual network hydrogels
Kunlan Diao , Yuhuan Xu , Jingyu Du , Teng Zhou , Xiao Zhan , Daohai Zhang , Xiaosi Qi , Shuhao Qin
International Journal of Minerals, Metallurgy, and Materials ›› 2025, Vol. 32 ›› Issue (3) : 747 -755.
High toughness and strong electromagnetic shielding properties of PAM/PEG dual network hydrogels
With the wide application of electromagnetic wave, a high performance electromagnetic shielding material is urgently needed to solve the harm caused by electromagnetic wave. Complete cross-linking strategy is adopted in this paper. Polyacrylamide (PAM) was synthesized by in-situ polymerization of acrylamide (AM) monomer. The obtained PAM was blended with polyethylene glycol (PEG) to prepare PAM/PEG hydrogels and form rigid support structures. Subsequently, the modified carbon nanotubes (S-CNTs) were incorporated into sodium alginate (SA) and PAM/PEG. Finally, Na+ was used to trigger SA self-assembly, which significantly improved the mechanical properties and electrical conductivity of the hydrogels, and prepared PAM/PEG/SA/S-CNTs-Na hydrogels with high toughness and strong electromagnetic interference (EMI) shielding efficiency (SE). The results showed that the compressive strength of PAM/PEG/SA/S-CNTs-Na hydrogel was 19.05 MPa, which was 7.69% higher than that of PAM/PEG hydrogel (17.69 MPa). More encouraging, the average EMI SE of PAM/PEG/SA/S-CNTs-Na hydrogels at a thickness of only 3 mm and a CNTs content of 16.53wt% was 32.92 dB, which is 113.21% higher than that of PAM/PEG hydrogels (15.44 dB).
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
M.H. Yuan and H.J. Wang, Robust and ultra-flexible PVDF composite film towards electromagnetic interference shielding and active personal thermal management, Prog. Org. Coat., 189(2024), art. No. 108362. |
| [5] |
J.M. Yang, H. Wang, Y.L. Zhang, H.X. Zhang, and J.W. Gu, Layered structural PBAT composite foams for efficient electromagnetic interference shielding, Nano Micro Lett., 16(2024), art. No. 31. |
| [6] |
Y.L. Zhang, K.P. Ruan, K. Zhou, and J.W. Gu, Controlled distributed Ti3C2Tx hollow microspheres on thermally conductive polyimide composite films for excellent electromagnetic interference shielding, Adv. Mater., 35(2023), No. 16, art. No. 2211642. |
| [7] |
T.T. Li, X.M. Wang, Y.T. Wang, et al., Fe3O4 and Ag micro/nano coating for high-efficiency flame retardancy and electromagnetic interference shielding, Prog. Org. Coat., 181(2023), art. No. 107563. |
| [8] |
|
| [9] |
|
| [10] |
P. Kaur, S. Bindra Narang, and S. Bahel, Complex permittivity, complex permeability and reflection loss of Co–Zr substituted La–Sr hexaferrites in 18–40 GHz frequency range, J. Magn. Magn. Mater., 502(2020), art. No. 166456. |
| [11] |
|
| [12] |
P. Song, B. Liu, C.B. Liang, et al., Lightweight, flexible cellulose-derived carbon aerogel@reduced graphene oxide/PDMS composites with outstanding EMI shielding performances and excellent thermal conductivities, Nano Micro Lett., 13(2021), No. 1, art. No. 91. |
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
T. Hu, G.P. Wu, H.T. Bu, et al., An injectable, adhesive, and self-healable composite hydrogel wound dressing with excellent antibacterial activity, Chem. Eng. J., 450(2022), art. No. 138201. |
| [17] |
D.K. Li, W. Zhan, W. Zuo, et al., Elastic, tough and switchable swelling hydrogels with high entanglements and low crosslinks for water remediation, Chem. Eng. J., 450(2022), art. No. 138417. |
| [18] |
|
| [19] |
|
| [20] |
T. Zhou, X. Zhan, K.L. Diao, et al., RGO loaded Fe3O4 strategy to construct high toughness PAM hydrogel for electromagnetic shielding, Prog. Org. Coat., 196(2024), art. No. 108750. |
| [21] |
H.R. Zhang, Z.G. Heng, J. Zhou, et al., In-situ co-continuous conductive network induced by carbon nanotubes in epoxy composites with enhanced electromagnetic interference shielding performance, Chem. Eng. J., 398(2020), art. No. 125559. |
| [22] |
|
| [23] |
W. Li, L.Q. Tao, M.C. Kang, et al., Tunable mechanical, self-healing hydrogels driven by sodium alginate and modified carbon nanotubes for health monitoring, Carbohydr. Polym., 295(2022), art. No. 119854. |
| [24] |
|
| [25] |
|
| [26] |
|
| [27] |
Y.H. Xu, X. Zhan, J.Y. Du, Z.L. Wu, and D.H. Zhang, Fluorescent hydrogel with high toughness response based on lanthanide metals: Material Adhesion, multicolor Modulation, information encryption, Chem. Eng. J., 489(2024), art. No. 151303. |
| [28] |
|
| [29] |
|
| [30] |
|
| [31] |
|
| [32] |
S. Abolpour Moshizi, H. Moradi, S.Y. Wu, Z.J. Han, A. Razmjou, and M. Asadnia, Biomimetic ultraflexible piezoresistive flow sensor based on graphene nanosheets and PVA hydrogel, Adv. Mater. Technol., 7(2022), No. 1, art. No. 2100783. |
| [33] |
M. Qin, W.F. Yuan, X.M. Zhang, et al., Preparation of PAA/PAM/MXene/TA hydrogel with antioxidant, healable ability as strain sensor, Colloids Surf. B, 214(2022), art. No. 112482. |
| [34] |
|
| [35] |
J.Y. Tian, Z. Sun, C. Shi, and Z.H. Huang, Rapid fabrication of tough sodium alginate/MXene/poly(vinyl alcohol) dual-network hydrogel electrolytes for flexible all-solid-state supercapacitors, Int. J. Biol. Macromol., 248(2023), art. No. 125937. |
| [36] |
Z. Zeng, C. Wang, G. Siqueira, et al., Nanocellulose-MXene biomimetic aerogels with orientation-tunable electromagnetic interference shielding performance, Adv. Sci., 7(2020), No. 15, art. No. 2000979. |
| [37] |
|
| [38] |
|
| [39] |
|
| [40] |
|
| [41] |
|
| [42] |
C.C. Yu, S.P. Zhu, C.T. Xing, et al., Fe nanoparticles and CNTs co-decorated porous carbon/graphene foam composite for excellent electromagnetic interference shielding performance, J. Alloys Compd., 820(2020), art. No. 153108. |
University of Science and Technology Beijing
/
| 〈 |
|
〉 |