Realizing high-performance Na₃V₂(PO₄)₂O₂F cathode for sodium-ion batteries via Nb-doping

Abstract

Na₃V₂(PO₄)₂O₂F (NVPOF) has received considerable interest as a promising cathode material for sodium-ion batteries because of its high working voltage and good structural/thermal stability. However, the sluggish electrode reaction resulting from its low intrinsic electronic conductivity significantly restricts its electrochemical performance and thus its practical application. Herein, Nb-doped Na₃V_2−xNb _x(PO₄)₂O₂F/graphene (rGO) composites (x = 0, 0.05, 0.1) were prepared using a solvothermal method followed by calcination. Compared to the un-doped NVPOF/rGO, doping V-site with high-valence Nb element (Nb⁵⁺) (Na₃V_1.95Nb_0.05(PO₄)₂O₂F/rGO (NVN05POF/rGO)) can result in the generated V⁴⁺/V³⁺ mixed-valence, ensuring the lower bandgap and thus the increased intrinsic electronic conductivity. Besides, the expanded lattice space favors the Na⁺ migration. With the structure feature where NVN05POF particles are attached to the rGO sheets, the electrode reaction kinetics is further accelerated owing to the well-constructed electron conductive network. As a consequence, the as-prepared NVN05POF/rGO sample exhibits a high specific capacity of ∼72 mAh·g⁻¹ at 10C (capacity retention of 65.2% (vs. 0.5C)) and excellent long-term cycling stability with the capacity fading rate of ∼0.099% per cycle in 500 cycles at 5C.

Keywords

sodium vanadium fluorophosphate / cathode / doping / rate capability / sodium-ion batteries

References

[1] Armand M, Tarascon JM. Building better batteries. Nature, 2008, 451(7179): 652.

[2] Goodenough JB, Park KS. The Li-ion rechargeable battery: A perspective. J. Am. Chem. Soc., 2013, 135(4): 1167.

[3] Liu YC, Liu XB, Wang TS, Fan LZ, Jiao LF. Research and application progress on key materials for sodium-ion batteries. Sustainable Energy Fuels, 2017, 1(5): 986.

[4] Jiang Q, Zhang WQ, Zhao JC, Rao PH, Mao JF. Superior sodium and lithium storage in strongly coupled amorphous Sb₂S₃ spheres and carbon nanotubes. Int. J. Miner. Metall. Mater., 2021, 28(7): 1194.

[5] C. Vaalma, D. Buchholz, M. Weil, and S. Passerini, A cost and resource analysis of sodium-ion batteries, Nat. Rev. Mater., 3(2018), art. No. 18013.

[6] Nayak PK, Yang LT, Brehm W, Adelhelm P. From lithium-ion to sodium-ion batteries: Advantages, challenges, and surprises. Angew. Chem. Int. Ed., 2018, 57(1): 102.

[7] He JR, Bhargav A, Shin W, Manthiram A. Stable dendrite-free sodium-sulfur batteries enabled by a localized high-concentration electrolyte. J. Am. Chem. Soc., 2021, 143(48): 20241.

[8] X.H. Ma, H.L. Chen, and G. Ceder, Electrochemical properties of monoclinic NaMnO₂, J. Electrochem. Soc., 158(2011), No. 12, art. No. A1307.

[9] Zhao J, Zhao LW, Dimov N, Okada S, Nishida T. Electrochemical and thermal properties of α-NaFeO₂ cathode for Na-ion batteries. J. Electrochem. Soc., 2013, 160(5): A3077.

[10] Komaba S, Takei C, Nakayama T, Ogata A, Yabuuchi N. Electrochemical intercalation activity of layered NaCrO₂ vs. LiCrO₂. Electrochem. Commun., 2010, 12(3): 355.

[11] Chen JS, Wei L, Mahmood A, et al. Prussian blue, its analogues and their derived materials for electrochemical energy storage and conversion. Energy Storage Mater., 2020, 25, 585.

[12] Y.C. Liu, N. Zhang, F.F. Wang, X.B. Liu, L.F. Jiao, and L.Z. Fan, Approaching the downsizing limit of maricite NaFePO₄ toward high-performance cathode for sodium-ion batteries, Adv. Funct. Mater., 28(2018), No. 30, art. No. 1801917.

[13] Zhao LN, Zhao HL, Long XY, Li ZL, Du ZH. Superior high-rate and ultralong-lifespan Na₃V₂(PO₄)₃@C cathode by enhancing the conductivity both in bulk and on surface. ACS Appl. Mater. Interfaces, 2018, 10(42): 35963.

[14] Yang JF, Li DD, Wang XS, Zhang XX, Xu J, Chen JT. Constructing micro-nano Na₃V₂(PO₄)₃/C architecture for practical high-loading electrode fabrication as superior-rate and ultralong-life sodium ion battery cathode. Energy Storage Mater., 2020, 24, 694.

[15] Qi YR, Mu LQ, Zhao JM, Hu YS, Liu HZ, Dai S. Superior Na-storage performance of low-temperature-synthesized Na₃(VO_1−xPO₄)₂F_1+2x (0≤.x≤1) nanoparticles for Na-ion batteries. Angew. Chem. Int. Ed., 2015, 54(34): 9911.

[16] Z.L. Jian, Y.S. Hu, X.L. Ji, and W. Chen, NASICON-structured materials for energy storage, Adv. Mater., 29(2017), No. 20, art. No. 1601925.

[17] Sheng JZ, Zang H, Tang CJ, et al. Graphene wrapped NAS-ICON-type Fe₂(MoO₄)₃ nanoparticles as a ultra-high rate cathode for sodium ion batteries. Nano Energy, 2016, 24, 130.

[18] Lv ZQ, Ling MX, Yi HM, Zhang HM, Zheng Q, Li XF. Electrode design for high-performance sodium-ion batteries: Coupling nanorod-assembled Na₃V₂(PO₄)₃@C microspheres with a 3D conductive charge transport network. ACS Appl. Mater. Interfaces, 2020, 12(12): 13869.

[19] J.Z. Guo, P.F. Wang, X.L. Wu, et al., High-energy/power and low-temperature cathode for sodium-ion batteries: In situ XRD study and superior full-cell performance, Adv. Mater., 29(2017), No. 33, art. No. 1701968.

[20] Deng G, Chao DL, Guo YW, et al. Graphene quantum dots-shielded Na₃(VO)₂(PO₄)₂F@C nanocuboids as robust cathode for Na-ion battery. Energy Storage Mater., 2016, 5, 198.

[21] Sauvage F, Quarez E, Tarascon JM, Baudrin E. Crystal structure and electrochemical properties vs. Na⁺ of the sodium fluorophosphate Na_1.5VOPO₄F_0.5. Solid State Sci., 2006, 8(10): 1215.

[22] Jin HY, Dong J, Uchaker E, et al. Three dimensional architecture of carbon wrapped multilayer Na₃V₂O₂(PO₄)₂F nanocubes embedded in graphene for improved sodium ion batteries. J. Mater. Chem. A, 2015, 3(34): 17563.

[23] Kumar PR, Jung YH, Wang JE, Kim DK. Na₃V₂O₂(PO₄)₂F-MWCNT nanocomposites as a stable and high rate cathode for aqueous and non-aqueous sodium-ion batteries. J. Power Sources, 2016, 324, 421.

[24] Yin YM, Xiong FY, Pei CY, et al. Robust three-dimensional graphene skeleton encapsulated Na₃V₂O₂(PO₄)₂F nanoparticles as a high-rate and long-life cathode of sodium-ion batteries. Nano Energy, 2017, 41, 452.

[25] Qi YR, Tong ZZ, Zhao JM, et al. Scalable room-temperature synthesis of multi-shelled Na₃(VOPO₄)₂F microsphere cathodes. Joule, 2018, 2(11): 2348.

[26] L.N. Zhao, X.H. Rong, Y.S. Niu, et al., Ostwald ripening tailoring hierarchically porous Na₃V₂(PO₄)₂O₂F hollow nanospheres for superior high-rate and ultrastable sodium ion storage, Small, 16(2020), No. 48, art. No. 2004925.

[27] Liu J, Zhang LL, Cao XZ, et al. Achieving the stable structure and superior performance of Na₃V₂(PO₄)₂O₂F cathodes via Na-site regulation. ACS Appl. Energy Mater., 2020, 3(8): 7649.

[28] L.J. Yue, C. Peng, C.L. Guo, et al., Na₃V_2−xFe_x(PO₄)₂O₂F: An advanced cathode material with ultra-high stability for superior sodium storage, Chem. Eng. J., 441(2022), art. No. 136132.

[29] R.D. Shannon, Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides, Acta Cryst., A32(1976), No. 5, p. 751.

[30] Zhao LN, Zhao HL, Du ZH, et al. Delicate lattice modulation enables superior Na storage performance of Na₃V₂(PO₄)₃ as both an anode and cathode material for sodium-ion batteries: Understanding the role of calcium substitution for vanadium. J. Mater. Chem. A, 2019, 7(16): 9807.

[31] Y.J. Chen, J. Cheng, C. Wang, et al., Simultaneous modified Na_2.9V_1.9Zr_0.1(PO4)₃/C@rGO as a superior high rate and ultralong lifespan cathode for symmetric sodium ion batteries, Chem. Eng. J., 413(2021), art. No. 127451.

[32] Ou X, Liang XH, Yang CH, et al. Mn doped NaV₃(PO₄)₃/C anode with high-rate and long cycle-life for sodium ion batteries. Energy Storage Mater., 2018, 12, 153.

[33] X.J. Dong, X.Z. Liu, P.K. Shen, and J.L. Zhu, Phase evolution of VC–VO heterogeneous particles to facilitate sulfur species conversion in Li-S batteries, Adv. Funct. Mater., 33(2023), No. 3, art. No. 2210987.

[34] X.L. Jia, L.X. Wei, L.J. Xu, Y.Y. Hu, H.Y. Guo, and Y.J. Li, Nb⁵⁺ doped Li_1.20Mn_0.54Ni_0.13Co_0.13O₂ with poly(3,4-ethylenedi-oxythiophene):poly(styrenesulfonate) surface modification as advanced cathode material for Li-ion batteries, J. Alloys Compd., 832(2020), art. No. 154986.

[35] J. Cheng, Y.J. Chen, S.Q. Sun, et al., Boosting the rate capability and cycle life of Zr-substituted Na₃V₂(PO₄)₃/C enwrapped on carbon nanotubes for symmetric Na-ion batteries, Electrochim. Acta, 385(2021), art. No. 138427.

[36] Tang A, Zhang S, Lin WG, et al. Ternary NASICON-typed Na_3.8MnV_0.8Zr_0.2(PO₄)₃ cathode with stable Mn²⁺/Mn³⁺ redox and fast sodiation/desodiation kinetics for Na-ion batteries. Energy Storage Mater., 2023, 58, 271.

[37] Lim SJ, Han DW, Nam DH, et al. Structural enhancement of Na₃V₂(PO₄)₃/C composite cathode materials by pillar ion doping for high power and long cycle life sodium-ion batteries. J. Mater. Chem. A, 2014, 2(46): 19623.

[38] Y.Y. Qiu, F. Fu, M. Hu, P.K. Shen, and J.L. Zhu, Tailored chemically bonded metal phosphide@carbon nanowire arrays on foam metal as an all-in-one anode for ultrahigh-area-capacity sodium-ion batteries, Chem. Eng. J., 454(2023), art. No. 140402.

[39] Y.N. Wang, H. Li, Z.K. Wang, Q.F. Li, C. Lian, and X. He, Progress on failure mechanism of lithium ion battery caused by diffusion induced stress, J. Inorg. Mater., 35(2020), No. 10, art. No. 1071.

[40] Lu B, Song YC, Zhang JQ. Selection of charge methods for lithium ion batteries by considering diffusion induced stress and charge time. J. Power Sources, 2016, 320, 104.

[41] K.J. Zhao, M. Pharr, J.J. Vlassak, and Z.G. Suo, Fracture of electrodes in lithium-ion batteries caused by fast charging, J Appl. Phys., 108(2010), No. 7, art. No. 073517.