An integrated and efficient process for borax preparation and magnetite recovery from soda-ash roasted ludwigite ore under CO–CO₂–N₂ atmosphere

Abstract

To realize the comprehensive utilization of ludwigite ore, an integrated and efficient route for the boron and iron separation was proposed in this work, which via soda-ash roasting under CO–CO_2–N₂ atmosphere followed by grind-leaching, magnetic separation, and CO₂ carbonation. The effects of roasting temperature, roasting time, CO/(CO+CO₂) composition, and Na₂CO₃ dosage on the boron and iron separation indices were primarily investigated. Under the optimized conditions of the roasting temperature of 850°C, roasting time of 60 min, soda ash dosage of 20wt%, and CO/(CO+CO₂) of 10vol%, 92% of boron was leached during wet grinding, and 88.6% of iron was recovered during the magnetic separation and magnetic concentrate with a total iron content of 61.51wt%. Raman spectra and ¹¹B NMR results indicated that boron exists as B(OH)₄ ⁻ in the leachate, from which high-purity borax pentahydrate could be prepared by CO₂ carbonation.

Keywords

ludwigite ore / soda-ash roasting / CO–CO_2–N₂ atmosphere / borax

References

[1] Burkhardt ER, Matos K. Boron reagents in process chemistry: Excellent tools for selective reductions. Chem. Rev., 2006, 106(7): 2617.

[2] El-Alaily NA, Mohamed RM. Effect of irradiation on some optical properties and density of lithium borate glass. Mater. Sci. Eng. B, 2003, 98(3): 193.

[3] C. Mermer and H. Şengül, Addressing potential resource scarcity for boron mineral: A system dynamics perspective, J. Clean. Prod., 270(2020), art. No. 122192.

[4] Thakur V, Singh A, Punia R, Dahiya S, Singh L. Structural properties and electrical transport characteristics of modified lithium borate glass ceramics. J. Alloys Compd., 2017, 696, 529.

[5] X. Zhang, G.H. Li, J.X. You, et al., Extraction of boron from ludwigite ore: Mechanism of soda-ash roasting of lizardite and szaibelyite, Minerals, 9(2019), No. 9, art. No. 533.

[6] M.X. Zhu, X.R. Zhou, H. Zhang, L. Wang, and H.Y. Sun, International trade evolution and competition prediction of boron ore: Based on complex network and link prediction, Resour. Policy, 82(2023), art. No. 103542.

[7] S. Jiao, H.Y. Zheng, Y.Y. Qu, B.Q. Liu, and B.B. Han, Supply and demand situation of global boron resources, Nat. Resour. Inf., 2020, No. 10, p. 85.

[8] An J, Xue XX. Life cycle environmental impact assessment of borax and boric acid production in China. J. Clean. Prod., 2014, 66, 121.

[9] Zhu ZP, You JX, Zhang X, et al. Recycling excessive alkali from reductive soda ash roasted ludwigite ore: Toward a zero-waste approach. ACS Sustainable Chem. Eng., 2020, 8(13): 5317.

[10] L. Ye, Z.W. Peng, R. Tian, et al., A novel process for highly efficient separation of boron and iron from ludwigite ore based on low-temperature microwave roasting, Powder Technol., 410(2022), art. No. 117848.

[11] Y. Li, J.T. Gao, X. Lan, and Z.C. Guo, A novel method for efficient recovery of boron from boron-bearing iron concentrate: Mineral phase transformation and low-temperature separation via super-gravity, Miner. Eng., 189(2022), art. No. 107899.

[12] X. Zhang, G.H. Li, M.J. Rao, et al., Co-conversion mechanisms of boron and iron components of ludwigite ore during reductive soda-ash roasting, Metals, 10(2020), No. 11, art. No. 1514.

[13] G.H. Li, L. Fang, X. Zhang, et al., Utilization of the MgO-rich residue originated from ludwigite ore: Hydrothermal synthesis of MHSH whiskers, Minerals, 7(2017), No. 8, art. No. 138.

[14] Liu YJ, Jiang T, Huang WJ, Liu CH, Wang JP, Xue XX. High temperature dielectric properties of ludwigite and its effect on microwave heating process. J. Microw. Power Electromagn. Energy, 2019, 53(3): 195.

[15] Wang G, Xue QG, Wang JS. Carbothermic reduction characteristics of ludwigite and boron-iron magnetic separation. Int. J. Miner. Metall. Mater., 2018, 25(9): 1000.

[16] G.J. Cheng, X.Z. Liu, H. Yang, X.X. Xue, and L.J. Li, Sintering and smelting property investigations of ludwigite, Processes, 10(2022), No. 1, art. No. 159.

[17] Liu SL, Cui CM, Zhang XP. Pyrometallurgical separation of boron from iron in ludwigite ore. ISIJ Int., 1998, 38(10): 1077.

[18] Wang G, Xue QG, Wang JS. Effect of Na₂CO₃ on reduction and melting separation of ludwigite/coal composite pellet and property of boron-rich slag. Trans. Nonferrous Met. Soc. China, 2016, 26(1): 282.

[19] Xu YZ, Jiang T, Gao HY, Chen WY, Xue XX. The changes of surface properties and enhancement of B₂O₃ leaching ratio of boron concentrate via wet ball milling. Powder Technol., 2018, 326, 89.

[20] Li GH, Liang BJ, Rao MJ, Zhang YB, Jiang T. An innovative process for extracting boron and simultaneous recovering metallic iron from ludwigite ore. Miner. Eng., 2014, 56, 57.

[21] Liang BJ, Li GH, Rao MJ, Peng ZW, Zhang YB, Jiang T. Water leaching of boron from soda-ash-activated ludwigite ore. Hydrometallurgy, 2017, 167, 101.

[22] J.X. You, J. Wang, J. Luo, Z.W. Peng, M.J. Rao, and G.H. Li, A facile route to the value-added utilization of ludwigite ore: Boron extraction and M_xMg_1−xFe₂O₄ spinel ferrites preparation, J. Clean. Prod., 375(2022), art. No. 134206.

[23] General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, and Standardization Administration of the People’s Republic of China, GB/T 6730.65-2009. Iron Ores—Determination of Total Iron Content—Titanium (III) Chloride Reduction Potassium Dichromate Titration Methods (Routine Method), 2009, Beijing, General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, and Standardization Administration of the People’s Republic of China.

[24] Bhagyaraj S, Al-Ghouti MA, Kasak P, Krupa I. An updated review on boron removal from water through adsorption processes. Emergent Mater., 2021, 4(5): 1167.

[25] Dolati M, Aghapour AA, Khorsandi H, Karimzade S. Boron removal from aqueous solutions by electrocoagulation at low concentrations. J. Environ. Chem. Eng., 2017, 5(5): 5150.

[26] Theiss FL, Ayoko GA, Frost RL. Removal of boron species by layered double hydroxides: A review. J. Colloid Interface Sci., 2013, 402, 114.

[27] Zhou YQ, Fang CH, Fang Y, Zhu FY. Polyborates in aqueous borate solution: A Raman and DFT theory investigation. Spectrochim. Acta A Mol. Biomol. Spectrosc., 2011, 83(1): 82.

[28] Zhou YQ, Fang Y, Fang CH, Zhu FY, Ge HW, Chen QL. Solution structure of energy stored system I: Aqua-B(OH)₄ ⁻: A DFT, car-parrinello molecular dynamics, and Raman study. J. Phys. Chem. B, 2013, 117(39): 11709.

[29] F.Y. Zhu, W.Q. Zhang, H.Y. Liu, et al, Micro-Raman and density functional theory analyses of ion pairs in concentrated sodium tetrahydroxyborate droplets, Spectrochim. Acta A, 224(2020), art. No. 117308.

[30] Kloprogge JT, Wharton D, Hickey L, Frost RL. Infrared and Raman study of interlayer anions CO₃ ²⁻, NO₃ ⁻, SO₄ ²⁻ and ClO₄ ⁻ in Mg/Al-hydrotalcite. Am. Mineral., 2002, 87(5–6): 623.

[31] Palmer SJ, Frost RL, Ayoko G, Nguyen T. Synthesis and Raman spectroscopic characterisation of hydrotalcite withCO₃ ²⁻ and (MoO₄)²⁻ anions in the interlayer. J. Raman Spectrosc., 2008, 39, 395.

[32] Chen W, Ouyang LZ, Liu JW, et al. Hydrolysis and regeneration of sodium borohydride (NaBH₄) - A combination of hydrogen production and storage. J. Power Sources, 2017, 359, 400.

[33] L.Z. Ouyang, W. Chen, J.W. Liu, M. Felderhoff, H. Wang, and M. Zhu, Enhancing the regeneration process of consumed NaBH₄ for hydrogen storage, Adv. Energy Mater., 7(2017), No. 19, art. No. 1700299.

[34] Qin CL, Ouyang LZ, Wang H, Liu JW, Shao HY, Zhu M. Regulation of high-efficient regeneration of sodium borohydride by magnesium-aluminum alloy. Int. J. Hydrogen En- ergy, 2019, 44(55): 29108.

[35] Zhong H, Ouyang LZ, Zeng MQ, et al. Realizing facile regeneration of spent NaBH₄ with Mg-Al alloy. J. Mater. Chem. A, 2019, 7(17): 10723.

[36] Battisha IK, El Beyally A, El Mongy SA, Nahrawi AM. Development of the FTIR properties of nano-structure silica gel doped with different rare earth elements, prepared by sol-gel route. J. Sol-Gel Sci. Technol., 2007, 41, 129.

[37] Fidalgo A, Ilharco LM. The defect structure of sol-gel-derived silica/polytetrahydrofuran hybrid films by FTIR. J. Non Cryst. Solids, 2001, 283(1–3): 144.

[38] Garcia-Lodeiro I, Palomo A, Fernández-Jiménez A, MacPhee DE. Compatibility studies between N–A–S–H and C-A-S-H gels. Study in the ternary diagram Na₂O–CaO–Al₂O_3–SiO_2–H₂O. Cent. Concr. Res., 2011, 41(9): 923.

[39] Devi SA, Philip D, Aruldhas G. Infrared, polarized Raman, and SERS spectra of borax. J. Solid State Chem., 1994, 113(1): 157.

[40] Winterstein-Beckmann A, Möncke D, Palles D, Kamitsos EI, Wondraczek L. Structure and properties of orthoborate glasses in the Eu₂O_3–(Sr, Eu)O–B₂O₃ quaternary. J. Phys. Chem. B, 2015, 119(7): 3259.