New role of α phase in the fracture behavior and fracture toughness of a β-type bio-titanium alloy

Abstract

The role of α precipitates formed during aging in the fracture toughness and fracture behavior of β-type bio-titanium alloy Ti–29Nb–13Ta–4.6Zr (TNTZ) was studied. Results showed that the fracture toughness of the TNTZ alloy aged at 723 K decreases to the minimum of 72.07–73.19 kJ·m⁻² when the aging time is extended to 4–8 h and then gradually increases and reaches 144.89 kJ·m⁻² after 72 h. The decrease in fracture toughness within the aging time of 4–8 h is caused by the large stress concentration at the tip of acicular a precipitates with a high aspect ratio and the preferential crack propagation along the inhomogeneous acicular a precipitates distributed in “V-shape” and “nearly perpendicular shape”. When the aging time is extended to 8–72 h, the precrack tip is uniformly blunted, and the crack is effectively deflected by a precipitates with multi long axis directions, more high homogeneity, low aspect ratio, and large number density. Analysis of the effect of a precipitates on the fracture behavior suggested that the number of long axis directions of a precipitates is the key controlling factor for the fracture behavior and fracture toughness of the TNTZ alloy aged for different times.

Keywords

fracture toughness / Ti–29Nb–13Ta–4.6Zr alloy / aged α phase / crack tip blunting

References

[1] Elias CN, Lima JHC, Valiev R, Meyers MA. Biomedical applications of titanium and its alloys. JOM, 2008, 60(3): 46.

[2] Li YH, Yang C, Zhao HD, Qu SG, Li XQ, Li YY. New developments of Ti-based alloys for biomedical applications. Materials, 2014, 7(3): 1709.

[3] Koizumi H, Takeuchi Y, Imai H, Kawai T, Yoneyama T. Application of titanium and titanium alloys to fixed dental prostheses. J. Prosthodont. Res., 2019, 63(3): 266.

[4] Gallo J, Vaculova J, Goodman SB, Konttinen YT, Thyssen JP. Contributions of human tissue analysis to understanding the mechanisms of loosening and osteolysis in total hip replacement. Acta Biomater., 2014, 10(6): 2354.

[5] Taylor D. Observations on the role of fracture mechanics in biology and medicine. Eng. Fract. Mech., 2018, 187, 422.

[6] Niinomi M. Recent titanium R&D for biomedical applications in Japan. JOM, 1999, 51(6): 32.

[7] Takematsu E, Cho K, Hieda J, et al. Adhesive strength of bioactive oxide layers fabricated on TNTZ alloy by three different alkali-solution treatments. J. Mech. Behav. Biomed. Mater., 2016, 61, 174.

[8] Lee YS, Niinomi M, Nakai M, Narita K, Cho K, Liu HH. Wear transition of solid-solution-strengthened Ti–29Nb–13Ta–4.6Zr alloys by interstitial oxygen for biomedical applications. J. Mech. Behav. Biomed. Mater., 2015, 51, 398.

[9] Song X, Niinomi M, Nakai M, Tsutsumi H, Wang L. Improvement in fatigue strength while keeping low Young’s modulus of a β-type titanium alloy through yttrium oxide dispersion. Mater. Sci. Eng. C, 2012, 32(3): 542.

[10] M. Zarka, B. Dikici, M. Niinomi, K.V. Ezirmik, M. Nakai, and H. Yilmazer, A systematic study of β-type Ti-based PVD coatings on magnesium for biomedical application, Vacuum, 183(2021), art. No. 109850.

[11] Kalaie MA, Zarei-Hanzaki A, Ghambari M, Dastur P, Málek J, Farghadany E. The effects of second phases on superelastic behavior of TNTZ bio alloy. Mater. Sci. Eng. A, 2017, 703, 513.

[12] Liu HH, Niinomi M, Nakai M, Obara S, Fujii H. Improved fatigue properties with maintaining low Young’s modulus achieved in biomedical beta-type titanium alloy by oxygen addition. Mater. Sci. Eng. A, 2017, 704, 10.

[13] Akahori T, Niinomi M, Fukui H, Ogawa M, Toda H. Improvement in fatigue characteristics of newly developed beta type titanium alloy for biomedical applications by thermomechanical treatments. Mater. Sci. Eng. C, 2005, 25(3): 248.

[14] Niinomi M. Fatigue performance and cyto-toxicity of low rigidity titanium alloy, Ti–29Nb–13Ta–4.6Zr. Biomaterials, 2003, 24(16): 2673.

[15] Ikeda M, Komatsu SY, Sowa I, Niinomi M. Aging behavior of the Ti–29Nb–13Ta–4.6Zr new beta alloy for medical implants. Metall. Mater. Trans. A, 2002, 33(3): 487.

[16] Niinomi M, Hattori T, Morikawa K, et al. Development of low rigidity β-type titanium alloy for biomedical applications. Mater. Trans., 2002, 43(12): 2970.

[17] Kashef S, Asgari A, Hilditch TB, Yan WY, Goel VK, Hodgson PD. Fracture toughness of titanium foams for medical applications. Mater. Sci. Eng. A, 2010, 527(29–30): 7689.

[18] Bhattacharjee A, Ghosal P, Nandy TK, Kamat SV, Gogia AK, Bhargava S. Effect of grain size on the tensile behaviour and fracture toughness of Ti–10V–4.5Fe–3Al beta titanium alloy. Trans. Indian Inst. Met., 2008, 61(5): 399.

[19] Peters JO, Lütjering G. Comparison of the fatigue and fracture of α+β and β titanium alloys. Metall. Mater. Trans. A, 2001, 32(11): 2805.

[20] Fan JK, Li JS, Kou HC, Hua K, Tang B. The interrelationship of fracture toughness and microstructure in a new near β titanium alloy Ti–7Mo–3Nb–3Cr–3Al. Mater. Charact., 2014, 96, 93.

[21] Zhou W, Ge P, Zhao YQ, et al. Relationship between mechanical properties and microstructure in a new high strength β titanium alloy. Rare Met. Mater. Eng., 2017, 46(8): 2076.

[22] Ebrahimi F, Seo HK. Ductile crack initiation in steels. Acta Mater., 1996, 44(2): 831.

[23] Ebrahimi F. Reed R. A study of crack initiation in the ductile-to-brittle transition region of a weld. Fracture Mechanics: Eighteenth Symposium, 1988, West Conshohocken, ASTM International, 555.

[24] R. Wang, L. Wang, X. Song, Y. Liu, M. Niinomi, and J. Cheng, Phenomenological law and process of a phase evolution in a β-type bio-Titanium alloy TNTZ during aging, Mater. Charact., 182(2021), art. No. 111576.

[25] Cao WD, Lu XP. On the relationship between the geometry of deformed crack tip and crack parameters. Int. J. Fract., 1984, 25(1): 33.

[26] Chowdhury T, Sivaprasad S, Bar HN, Tarafder S, Bandyopadhyay NR. Stretch zone formation in cyclic fracture of 20MnMoNi55 pressure vessel steel. Eng. Fract. Mech., 2015, 148, 60.

[27] Wang L, Niinomi M, Takahashi S, et al. Relationship between fracture toughness and microstructure of Ti–6Al–2Sn–4Zr–2Mo alloy reinforced with TiB particles. Mater. Sci. Eng. A, 1999, 263(2): 319.