Effect of traveling-wave magnetic field on dendrite growth of high-strength steel slab: Industrial trials and numerical simulation

Abstract

The dendrite growth behavior of high-strength steel during slab continuous casting with a traveling-wave magnetic field was studied in this paper. The morphology of the solidification structure and composition distribution were analyzed. Results showed that the columnar crystals could deflect and break when the traveling-wave magnetic field had low current intensity. With the increase in current intensity, the secondary dendrite arm spacing and solute permeability decreased, and the columnar crystal transformed into an equiaxed crystal. The electromagnetic force caused by the traveling-wave magnetic field changed the temperature gradient and velocity magnitude and promoted the breaking and fusing of dendrites. Dendrite compactness and composition uniformity were arranged in descending order as follows: columnar-to-equiaxed transition (high current intensity), columnar crystal zone (low current intensity), columnar-to-equiaxed transition (low current intensity), and equiaxed crystal zone (high current intensity). Verified numerical simulation results combined with the boundary layer theory of solidification front and dendrite breaking–fusing model revealed the dendrite deflection mechanism and growth process. When thermal stress is not considered, and no narrow segment can be found in the dendrite, the velocity magnitude on the solidification front of liquid steel can reach up to 0.041 m/s before the dendrites break.

Keywords

high-strength steel / traveling-wave magnetic field / dendrite growth / numerical simulation

References

[1] Song PS, Hwang S. Mechanical properties of high-strength steel fiber-reinforced concrete. Constr. Build. Mater., 2004, 18(9): 669.

[2] Senuma T. Physical metallurgy of modern high strength steel sheets. ISIJ Int., 2001, 41(6): 520.

[3] Qiang XH, Bijlaard F, Kolstein H. Dependence of mechanical properties of high strength steel S690 on elevated temperatures. Constr. Build. Mater., 2012, 30, 73.

[4] Itoga H, Tokaji K, Nakajima M, Ko HN. Effect of surface roughness on step-wise S–N characteristics in high strength steel. Int. J. Fatigue, 2003, 25(5): 379.

[5] Yan JB, Liew JYR, Zhang MH, Wang JY. Mechanical properties of normal strength mild steel and high strength steel S690 in low temperature relevant to Arctic environment. Mater. Des., 2014, 61, 150.

[6] Li X, Wang XH, Bao YP, Gong J, Pang WG, Wang M. Effect of electromagnetic stirring on the solidification behavior of high-magnetic-induction grain-oriented silicon steel continuous casting slab. JOM, 2020, 72(10): 3628.

[7] Vakhrushev A, Kharicha A, Liu ZQ, et al. Electric current distribution during electromagnetic braking in continuous casting. Metall. Mater. Trans. B, 2020, 51(6): 2811.

[8] Song XP, Cheng SS, Cheng ZJ. Mathematical modelling of billet casting with secondary cooling zone electromagnetic stirrer. Ironmaking Steelmaking, 2013, 40(3): 189.

[9] Natarajan TT, El-Kaddah N. Finite element analysis of electromagnetic and fluid flow phenomena in rotary electromagnetic stirring of steel. Appl. Math. Model., 2004, 28(1): 47.

[10] Huang JT, Wang EG, He JC. Numerical simulation of linear electromagnetic stirring in secondary cooling region of slab caster. J. Iron Steel Res. Int., 2003, 10(3): 16.

[11] Xu Y, Xu RJ, Fan ZJ, Li CB, Deng AY, Wang EG. Analysis of cracking phenomena in continuous casting of 1Cr13 stainless steel billets with final electromagnetic stirring. Int. J. Miner. Metall. Mater., 2016, 23(5): 534.

[12] Yao C, Wang M, Zhang MY, Xing LD, Zhang HB, Bao YP. Effects of mold electromagnetic stirring on heat transfer, species transfer and solidification characteristics of continuous casting round billet. J. Mater. Res. Technol., 2022, 19, 1766.

[13] Jiang DB, Zhu MY. Center segregation with final electromagnetic stirring in billet continuous casting process. Metall. Mater. Trans. B, 2017, 48(1): 444.

[14] Wang JL, Janisch R, Madsen GKH, Drautz R. First-principles study of carbon segregation in bcc iron symmetrical tilt grain boundaries. Acta Mater., 2016, 115, 259.

[15] Ludlow V, Normanton A, Anderson A, et al. Strategy to minimise central segregation in high carbon steel grades during billet casting. Ironmaking Steelmaking, 2005, 32(1): 68.

[16] Wu CL, Wang Q, Li DW, et al. Macrosegregation under new flow pattern and temperature distribution induced by electromagnetic swirling flow in nozzle during continuous casting of square billet. J. Mater. Res. Technol., 2020, 9(3): 5630.

[17] Jiang D, Zhu M. Solidification structure and macrosegregation of billet continuous casting process with dual electromagnetic stirrings in mold and final stage of solidification: A numerical study. Metall. Mater. Trans. B, 2016, 47(6): 3446.

[18] Wu CL, Li DW, Zhu XW, Wang Q. Influence of electromagnetic swirling flow in nozzle on solidification structure and macrosegregation of continuous casting square billet. Acta Metall. Sin., 2019, 55(7): 875.

[19] D.V. Alexandrov and P.K. Galenko, A review on the theory of stable dendritic growth, Philos. Trans. R. Soc. London: Ser. A, 379(2021), No. 2205, art. No. 20200325.

[20] M.S. Jalali, A. Zarei-Hanzaki, M. Malekan, et al., Substructure induced dendrite-fragmentation during thermomechanical processing of as-cast Mg–Sn–Li–Zn alloy, Mater. Lett., 305(2021), art. No. 130690.

[21] Luo ZC, Wang HP. Primary dendrite growth kinetics and rapid solidification mechanism of highly undercooled Ti–Al alloys. J. Mater. Sci. Technol., 2020, 40, 47.

[22] R. Oliveira, T.A. Costa, M. Dias, C. Konno, N. Cheung, and A. Garcia, Transition from high cooling rate cells to dendrites in directionally solidified Al–Sn–(Pb) alloys, Mater. Today Commun., 25(2020), art. No. 101490.

[23] Xu Y, Wang T, Wang F, Wang EG. Influence of lower frequency electromagnetic field on dendritic crystal growth in special alloys. J. Cryst. Growth, 2017, 468, 506.

[24] Ren JK, Chen Y, Cao YF, Sun MY, Xu B, Li DZ. Modeling motion and growth of multiple dendrites during solidification based on vector-valued phase field and two-phase flow models. J. Mater. Sci. Technol., 2020, 58, 171.

[25] Yang SL, Yang SF, Liu W, Li JS, Gao JG, Wang Y. Microstructure, segregation and precipitate evolution in directionally solidified GH4742 superalloy. Int. J. Miner. Metall. Mater., 2023, 30(5): 939.

[26] Sani SA, Arabi H, Kheirandish S, Ebrahimi G. Investigation on the homogenization treatment and element segregation on the microstructure of a γ/γ′-cobalt-based superalloy. Int. J. Miner. Metall. Mater., 2019, 26(2): 222.

[27] Chen HB, Long MJ, Chen DF, Liu T, Duan HM. Numerical study on the characteristics of solute distribution and the formation of centerline segregation in continuous casting (CC) slab. Int. J. Heat Mass Transfer, 2018, 126, 843.

[28] Shibata H, Itoyama S, Kishimoto Y, Takeuchi S, Sekiguchi H. Prediction of equiaxed crystal ratio in continuously cast steel slab by simplified columnar-to-equiaxed transition model. ISIJ Int., 2006, 46(6): 921.

[29] Yin SK, Luo S, Zhang WJ, Wang WL, Zhu MY. Numerical simulation of macrosegregation in continuously cast gear steel 20CrMnTi with final electromagnetic stirring. J. Iron Steel Res. Int., 2021, 28(4): 424.

[30] Cornell D, Katz DL. Flow of gases through consolidated porous media. Ind. Eng. Chem., 1953, 45(10): 2145.

[31] Asai S, Muchi I. Theoretical analysis and model experiments on the formation mechanism of channel-type segregation. ISIJ Int., 1978, 18(2): 90.

[32] Zhong HG, Wang RJ, Han QY, et al. Solidification structure and central segregation of 6Cr13Mo stainless steel under simulated continuous casting conditions. J. Mater. Res. Technol., 2022, 20, 3408.

[33] Y. Ji, H.Y. Tang, P. Lan, C.J. Shang, and J.Q. Zhang, Effect of dendritic morphology and central segregation of billet castings on the microstructure and mechanical property of hot-rolled wire rods, Steel Res. Int., 88(2017), No. 8, art. No. 1600426.

[34] Hunt JD. Steady state columnar and equiaxed growth of dendrites and eutectic. Mater. Sci. Eng. A, 1984, 65(1): 75.

[35] Y.N. Yu, Principles of Metallography, 1st ed., Metallurgical Industry Press, Beijing, 2000.

[36] Vogel A. Turbulent flow and solidification: Stir-cast microstructure. Met. Sci., 1978, 12(12): 576.

[37] Flemings MC. Solidification processing. Metall. Trans. B, 1974, 5(10): 2121.