Influence of substituting B₂O₃ with Li₂O on the viscosity, structure and crystalline phase of low-reactivity mold flux

Abstract

The low-reactivity mold flux with low SiO₂ content is considered suitable for the continuous casting of high-aluminum steel since it can significantly reduce the reaction between Al in steel and SiO₂ in mold flux. However, the traditional low-reactivity mold flux still presents some problems such as high viscosity and strong crystallization tendency. In this study, the co-addition of Li₂O and B₂O₃ in CaO–Al₂O₃–10wt%SiO₂ based low-reactivity mold flux was proposed to improve properties of mold flux for high-aluminum steel, and the effect of Li₂O replacing B₂O₃ on properties of mold flux was investigated. The viscosity of the mold flux with 2wt% Li₂O and 6wt% B₂O₃ reached a minimum value of 0.07 Pa·s. The break temperature and melting point showed a similar trend with the viscosity. Besides, the melt structure and precipitation of the crystalline phase were studied using Raman and X-ray diffraction spectra to better understand the evolution of viscosity. It demonstrated that with increasing Li₂O content in the mold flux from 0 to 6wt%, the degree of polymerization of aluminate and the aluminosilicate network structure increased because of increasing Li⁺ released by Li₂O, indicating the added Li₂O was preferentially associated with Al³⁺ as a charge compensator. The precipitation of LiAlO₂ crystalline phase gradually increased with the replacement of B₂O₃ by Li₂O. Therefore, Li₂O content should be controlled below 2wt% to avoid LiAlO₂ precipitation, which was harmful to the continuous casting of high-aluminum steels.

Keywords

low-reactivity mold flux / viscosity / structure / crystalline phase

References

[1] Fu XJ, Wen GH, Tang P, Liu Q, Zhou ZY. Effects of CaO/Al₂O₃ ratio on crystallisation behaviour of CaO–Al₂O₃ based mould fluxes for high aluminium TRIP steel. Ironmaking Steelmaking, 2014, 41(5): 342.

[2] Yu HX, Yang DX, Zhang JM, Qiu GY, Zhang N. Effect of Al content on the reaction between Fe-10Mn–xAl (x = 0.035wt%, 0.5wt%, 1wt%, and 2wt%) steel and CaO–SiO₂–Al₂O₃–MgO slag. Int. J. Miner. Metall. Mater., 2022, 29(2): 256.

[3] Chen Y, He SP, Li ZR, Zhang XB, Wang QQ, Wang Q. Properties and structure of a new non-reactive mold flux for high-Al steel. J. Iron Steel Res. Int., 2022, 29(1): 61.

[4] Kim MS, Kang YB. Reddy RG, Chaubal P, Pistorius PC, Pal U. A reaction model to simulate composition change of mold flux during continuous casting of high Al steel. Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016, 2016, Cham, Springer, 271.

[5] Kim MS, Park MS, Kang YB. A reaction between high Mn-high Al steel and CaO-SiO₂-type molten mold flux: Reduction of additive oxide components in mold flux by Al in steel. Metall. Mater. Trans. B, 2019, 50(5): 2077.

[6] Kim MS, Park MS, Kang SE, Park JK, Kang YB. A reaction between high Mn-high Al steel and CaO-SiO₂-type molten mold flux: Reaction mechanism change by high Al content ([pct Al]₀ = 5.2) in the steel and accumulation of reaction product at the reaction interface. ISIJ Int., 2018, 58(4): 686.

[7] Kim MS, Lee SW, Cho JW, Park MS, Lee HG, Kang YB. A reaction between high Mn-high Al steel and CaO-SiO₂-type molten mold flux: Part I. composition evolution in molten mold flux. Metall. Mater. Trans. B, 2013, 44(2): 299.

[8] Gao YM, Wang SB, Hong C, Ma XJ, Yang F. Effects of basicity and MgO content on the viscosity of the SiO₂–CaO–MgO–9wt%Al₂O₃ slag system. Int. J. Miner. Metall. Mater., 2014, 21(4): 353.

[9] Kim GH, Sohn I. Role of B₂O₃ on the viscosity and structure in the CaO–Al₂O₃–Na₂O-based system. Metall. Mater. Trans. B, 2014, 45(1): 86.

[10] S.P. He, Z.R. Li, Z. Chen, T. Wu, and Q. Wang, Review of mold fluxes for continuous casting of high-alloy (Al, Mn, Ti) steels, Steel Res. Int., 90(2019), No. 1, art. No. 1800424.

[11] Street S, James K, Minor N, Roelant A, Tremp J. Production of high-aluminum steel slabs. Iron Steel Technol., 2008, 5(7): 38.

[12] Ji CX, Cui Y, Zeng Z, Tian ZH, Zhao CL, Zhu GS. Continuous casting of high-Al steel in Shougang Jingtang steel works. J. Iron Steel Res. Int., 2015, 22(1): 53.

[13] Wang H. Study on Crystallization Behaviors and Heat Transfer of High Al Steel Mould Fluxes, 2010, Chongqing, Chongqing university.

[14] Wang H, Tang P, Wen GH, Yu X. Effect of Na₂O on crystallisation behaviour and heat transfer of high Al steel mould fluxes. Ironmaking Steelmaking, 2011, 38(5): 369.

[15] Wu T, He SP, Zhu LL, Wang Q. Study on reaction performances and applications of mold flux for high-aluminum steel. Mater. Trans., 2016, 57(1): 58.

[16] K. Blazek, H.B. Yin, G. Skoczylas, M. McClymonds, and M. Frazee, Development and evaluation of lime alumina-based mold powders for casting high-aluminum TRIP steel grades, [in] AISTech, Iron and Steel Technology Conference and Exhibition, 2011, p. 1577.

[17] Li JM, Jiang MF, Sun LF. Development of low responsiveness mold fluxes for 20Mn₂₃AlV. China Metall., 2017, 27(12): 28.

[18] Wang HM, Zhang TW, Zhu H, Li GR, Yan YQ, Wang JH. Effect of B₂O₃ on melting temperature, viscosity and desulfurization capacity of CaO-based refining flux. ISIJ Int., 2011, 51(5): 702.

[19] J.L. Li, B.W. Kong, B. Galdino, et al., Investigation on properties of fluorine-free mold fluxes based on CaO–Al₂O₃–B₂O₃ system, Steel Res. Int., 88(2017), No. 9, art. No. 1600485.

[20] Yan W, Chen WQ, Yang YD, McLean A. Viscous characteristics and modelling of CaO–Al₂O₃–based mould flux with B₂O₃ as a substitute for CaF₂. Ironmaking Steelmaking, 2019, 46(4): 347.

[21] Yan W, Chen W, Yang Y, Lippold C, McLean A. Evaluation of B₂O₃ as replacement for CaF₂ in CaO-Al₂O₃ based mould flux. Ironmaking Steelmaking, 2016, 43(4): 316.

[22] Yu X, Wen GH, Tang P, Wang H. Effect of B₂O₃ on the physico-chemical properties of mold slag used for high-Al steel. J. Chongqing Univ., 2011, 34(1): 66.

[23] Huang XH, Liao JL, Zheng K, Hu HH, Wang FM, Zhang ZT. Effect of B₂O₃ addition on viscosity of mould slag containing low silica content. Ironmaking Steelmaking, 2014, 41(1): 67.

[24] Kim GH, Sohn I. Influence of Li₂O on the viscous behavior of CaO-Al₂O₃-12 mass% Na₂O-12 mass% CaF₂ based slags. ISIJ Int., 2012, 52(1): 68.

[25] Wu T, Wang Q, He SP, Xu JF, Long X, Lu YJ. Study on properties of alumina-based mould fluxes for high-Al steel slab casting. Steel Res. Int., 2012, 83(12): 1194.

[26] J.L. Li, B.W. Kong, X.Y. Gao, Q.C. Liu, Q.F. Shu, and K. Chou, Investigation the influences of B₂O₃ and R₂O on the structure and crystallization behaviors of CaO–Al₂O₃ based F-free mold flux, Metall. Res. Technol., 115(2018), No. 3, art. No. 304.

[27] Qi J, Liu C, Jiang M. Role of Li₂O on the structure and viscosity in CaO–Al₂O₃–Li₂O–Ce₂O₃ melts. J. Non Cryst. Solids, 2017, 475, 101.

[28] Zhou LJ, Li H, Wang WL, Xiao D, Zhang L, Yu J. Effect of Li₂O on the behavior of melting, crystallization, and structure for CaO–Al₂O₃-based mold fluxes. Metall. Mater. Trans. B, 2018, 49(5): 2232.

[29] Lu BX, Chen K, Wang WL, Jiang BB. Effects of Li₂O and Na₂O on the crystallization behavior of lime-alumina-based mold flux for casting high-Al steels. Metall. Mater. Trans. B, 2014, 45(4): 1496.

[30] Qi J, Liu CJ, Li CL, Jiang MF. Viscous properties of new mould flux based on aluminate system with CeO₂ for continuous casting of RE alloyed heat resistant steel. J. Rare Earths, 2016, 34(3): 328.

[31] Yang J, Cui H, Zhang J, Ostrovski O, Zhang C, Cai D. Effect of Na₂O on the interfacial reaction between CaO-Al₂O₃ based mold fluxes and high-Al steel at 1500°C. ISIJ Int., 2019, 59(12): 2247.

[32] Seftharaman S, Du SC, Sridhar S, Mills KC. Estimation of liquidus temperatures for multicomponent silicates from activation energies for viscous flow. Metall. Mater. Trans. B, 2000, 31(1): 111.

[33] Chen JY, Wang WL, Zhou LJ, Pan ZH. Effect of Al₂O₃ and MgO on crystallization and structure of CaO–SiO₂–B₂O₃-based fluorine-free mold flux. J. Iron Steel Res. Int., 2021, 28(5): 552.

[34] Ju JT, Yang KS, Zhu ZH, Gu Y, Chang LZ. Effect of CaF₂ and CaO/Al₂O₃ on viscosity and structure of TiO₂-bearing slag for electroslag remelting. J. Iron Steel Res. Int., 2021, 28(12): 1541.

[35] Yuan F, Zhao Z, Zhang YL, Wu T. Influence of Cr₂O₃ content on viscosity and rheological behavior of Cr₂O₃-containing slags. J. Iron Steel Res. Int., 2022, 29(4): 601.

[36] D.L. Zheng, G.J. Ma, X. Zhang, M.K. Liu, and J. Xu, Effect of CaO/Al₂O₃ on structure, viscosity, and surface tension of electroslag remelting-type CeO₂-bearing slag, J. Iron Steel Res. Int., (2022), p. 1.

[37] Zhou LJ, Luo H, Wang WL, Yan X, Wu HF. Effect of Al₂O₃/Na₂O ratio and MnO on high-temperature properties of mold flux for casting peritectic steel. J. Iron Steel Res. Int., 2022, 29(1): 53.

[38] Yuan F, Zhao Z, Zhang YL, Wu T. Effect of Al₂O₃ content on the viscosity and structure of CaO-SiO₂-Cr₂O₃-Al₂O₃ slags. Int. J. Miner. Metall. Mater., 2022, 29(8): 1522.

[39] Xu CY, Wang C, Xu RZ, Zhang JL, Jiao KX. Effect of Al₂O₃ on the viscosity of CaO–SiO₂–Al₂O₃–MgO–Cr₂O₃ slags. Int. J. Miner. Metall. Mater., 2021, 28(5): 797.

[40] Poe BT, McMillan PF, Coté B, Massiot D, Coutures JP. Structure and dynamics in calcium aluminate liquids: High-temperature 27Al NMR and Raman spectroscopy. J. Am. Ceram. Soc., 1994, 77(7): 1832.

[41] McMillan PF, Petuskey WT, Coté B, Massiot D, Landron C, Coutures JP. A structural investigation of CaO-Al₂O₃ glasses via 27Al MAS-NMR. J. Non Cryst. Solids, 1996, 195(3): 261.

[42] Neuville DR, Cormier L, Massiot D. Al coordination and speciation in calcium aluminosilicate glasses: Effects of composition determined by ²⁷Al MQ-MAS NMR and Raman spectroscopy. Chem. Geol., 2006, 229(1–3): 173.

[43] Klyuev VP, Pevzner BZ. The influence of aluminum oxide on the thermal expansion, glass transition temperature, and viscosity of lithium and sodium aluminoborate glasses. Glass Phys. Chem., 2002, 28(4): 207.

[44] Klyuev VP, Pevzner B. Structural interpretation of the glass transition temperature and thermal expansion of glasses in the system BaO–Al₂O₃–B₂O₃. Phys. Chem. Glasses, 2000, 41, 380.

[45] Qi J, Liu CJ, Jiang MF. Viscosity-structure-crystallization of the Ce₂O₃-bearing calcium-aluminate-based melts with different contents of B₂O₃. ISIJ Int., 2018, 58(1): 186.

[46] Padmaja G, Kistaiah P. Infrared and Raman spectroscopic studies on alkali borate glasses: Evidence of mixed alkali effect. J. Phys. Chem. A, 2009, 113(11): 2397.

[47] Park JH, Min DJ, Song HS. Structural investigation of CaO-Al₂O₃ and CaO-Al₂O₃-CaF₂ slags via Fourier transform infrared spectra. ISIJ Int., 2002, 42(1): 38.

[48] Ma N, You JL, Lu LM, Wang J, Wang M, Wan SM. Micro-structure studies of the molten binary K₃AlF₆–Al₂O₃ system by in situ high temperature Raman spectroscopy and theoretical simulation. Inorg. Chem. Front., 2018, 5(8): 1861.

[49] Yang J, Zhang JQ, Ostrovski O, Zhang C, Cai DX. Effects of fluorine on solidification, viscosity, structure, and heat transfer of CaO-Al₂O₃-based mold fluxes. Metall. Mater. Trans. B, 2019, 50(4): 1766.

[50] McMillan P, Piriou B. Raman spectroscopy of calcium aluminate glasses and crystals. J. Non Cryst. Solids, 1983, 55(2): 221.

[51] Kim TS, Park JH. Structure-viscosity relationship of low-silica calcium aluminosilicate melts. ISIJ Int., 2014, 54(9): 2031.

[52] Li H, Hrma P, Vienna JD, Qian MX, Su YL, Smith DE. Effects of Al₂O₃, B₂O₃, Na₂O, and SiO₂ on nepheline formation in borosilicate glasses: Chemical and physical correlations. J. Non Cryst. Solids, 2003, 331(1–3): 202.

[53] Gao EZ, Wang WL, Zhang L. Effect of alkaline earth metal oxides on the viscosity and structure of the CaO-Al₂O₃ based mold flux for casting high-al steels. J. Non Cryst. Solids, 2017, 473, 79.

[54] Gao JX, Wen GH, Huang T, Bai BW, Tang P, Liu Q. Effect of Al speciation on the structure of high-Al steels mold fluxes containing fluoride. J. Am. Ceram. Soc., 2016, 99(12): 3941.

[55] Kim GH, Sohn I. Effect of Al₂O₃ on the viscosity and structure of calcium silicate-based melts containing Na₂O and CaF₂. J. Non Cryst. Solids, 2012, 358(12–13): 1530.

[56] El Hayek R, Ferey F, Florian P, Pisch A, Neuville DR. Structure and properties of lime alumino-borate glasses. Chem. Geol., 2017, 461, 75.

[57] Du LS, Stebbins JF. Site connectivities in sodium aluminoborate glasses: Multinuclear and multiple quantum NMR results. Solid State Nucl. Magn. Reson., 2005, 27(1–2): 37.

[58] Neuville DR, Henderson GS, Cormier L, Massiot D. The structure of crystals, glasses, and melts along the CaO-Al₂O₃ join: Results from Raman, Al L- and AT-edge X-ray absorption, and ²⁷Al NMR spectroscopy. Am. Mineral., 2010, 95(10): 1580.

[59] McMillan P. Structural studies of silicate glasses and melts—Applications and limitations of Raman spectroscopy. Am. Mineral., 1984, 69(7–8): 622.

[60] Mysen BO, Virgo D. Structure and properties of fluorine-bearing aluminosilicate melts: The system Na₂O–Al₂O₃–SiO₂–F at 1 atm. Contr. Mineral. Petrol., 1985, 91(3): 205.

[61] Park JY, Kim GH, Kim JB, Park S, Sohn I. Thermophysical properties of B₂O₃-containing mold flux for high carbon steels in thin slab continuous casters: Structure, viscosity, crystallization, and wettability. Metall. Mater. Trans. B, 2016, 47(4): 2582.

[62] Dwivedi BP, Khanna BN. Cation dependence of Raman scattering in alkali borate glasses. J. Phys. Chem. Solids, 1995, 56(1): 39.

[63] Li H, Su YL, Li LY, Strachan DM. Raman spectroscopic study of gadolinium(III) in sodium-aluminoborosilicate glasses. J. Non Cryst. Solids, 2001, 292(1–3): 167.

[64] Kamitsos EI, Karakassides MA, Chryssikos GD. Vibrational spectra of magnesium-sodium-borate glasses. 2. Raman and mid-infrared investigation of the network structure. J. Phys. Chem., 1987, 91(5): 1073.

[65] Kim Y, Morita K. Relationship between molten oxide structure and thermal conductivity in the CaO–SiO₂–B₂O₃ system. ISIJ Int., 2014, 54(9): 2077.

[66] X.D. Xing, Z.G. Pang, C. Mo, S. Wang, and J.T. Ju, Effect of MgO and BaO on viscosity and structure of blast furnace slag, J. Non Cryst. Solids, 530(2020), art. No. 119801.

[67] Zhang L, Wang WL, Xie SL, Zhang KX, Sohn I. Effect of basicity and B₂O₃ on the viscosity and structure of fluorine-free mold flux. J. Non Cryst. Solids, 2017, 460, 113.

[68] Xiao D, Wang WL, Lu BX. Effects of B₂O₃ and BaO on the crystallization behavior of CaO–Al₂O₃-based mold flux for casting high-Al steels. Metall. Mater. Trans. B, 2015, 46(2): 873.

[69] Yan W, Chen W, Yang Y, Lippold C, McLean A. Effect of CaO/Al₂O₃ ratio on viscosity and crystallisation behaviour of mould flux for high Al non-magnetic steel. Ironmaking Steelmaking, 2015, 42(9): 698.

[70] Wang Q, Yang J, Zhang C, Cai DX, Zhang JQ, Ostrovski O. Effect of CaO/Al₂O₃ ratio on viscosity and structure of CaO-Al₂O₃-based fluoride-free mould fluxes. J. Iron Steel Res. Int., 2019, 26(4): 374.