Rheological properties of a multiscale granular system during mixing of cemented paste backfill: A review

Abstract

The technology of cemented paste backfill (CPB) is an effective method for green mining. In CPB, mixing is a vital process aiming to prepare a paste that meets the non-stratification, non-segregation, and non-bleeding requirements. As a multiscale granular system, homogenization is one of the challenges in the paste-mixing process. Due to the high shearing, high concentration, and multiscale characteristics, paste exhibits complex rheological properties in the mixing process. An overview of the mesomechanics and structural evolution is presented in this review. The effects of various influencing factors on the paste’s rheological properties were investigated, and the rheological models of the paste were outlined from the macroscopic and mesoscopic levels. The results show that the mechanical effects and structural evolution are the fundamental factors affecting the rheological properties of the paste. Existing problems and future development trends are presented to change the practice where the CPB process comes first and the theory lags.

Keywords

cemented paste backfill / rheology / mixing process / mesomechanics / structural evolution

References

[1] Ruan ZE, Wu AX, Jiao HZ, et al. Advances and trends on thickening of full-tailings slurry in China. Chin. J. Nonferrous Met., 2022, 32, 286.

[2] T. Gao, W. Sun, Z. Liu, and H. Cheng, Investigation on fracture characteristics and failure pattern of inclined layered cemented tailings backfill, Constr. Build. Mater., 343(2022), art. No. 128110.

[3] J.X. Li, W. Sun, Q.Q. Li, S. Chen, M.L. Yuan, and H. Xia, Influence of layered angle on dynamic characteristics of backfill under impact loading, Minerals, 12(2022), No. 5, art. No. 511.

[4] W. Sun, S.Y. Zhang, J.X. Li, and Z.Y. Li, Experimental study on energy dissipation of layered backfill under impact load, Constr. Build. Mater., 347(2022), art. No. 128478.

[5] Liu L, Xin J, Huan C, et al. Effect of curing time on the mesoscopic parameters of cemented paste backfill simulated using the particle flow code technique. Int. J. Miner. Metall. Mater., 2021, 28(4): 590.

[6] Wu AX, Ruan ZE, Wang JD. Rheological behavior of paste in metal mines. Int. J. Miner. Metall. Mater., 2022, 29(4): 717.

[7] C. Qi and A. Fourie, Cemented paste backfill for mineral tailings management: Review and future perspectives, Miner. Eng., 144(2019), art. No. 106025.

[8] Wang S, Song X, Wei M, et al. Flow characteristics of fresh cemented paste backfill containing flocculant under variable shear rate based on water migration. Min. Metall. Explor., 2022, 39(3): 1189.

[9] Jiang H, Fall M, Yilmaz E, Li Y, Yang L. Effect of mineral admixtures on flow properties of fresh cemented paste backfill: Assessment of time dependency and thixotropy. Powder Technol., 2020, 372, 258.

[10] Qiu J, Guo Z, Yang L, Jiang H, Zhao Y. Effects of packing density and water film thickness on the fluidity behaviour of cemented paste backfill. Powder Technol., 2020, 359, 27.

[11] S.G. Liu and M. Fall, Fresh and hardened properties of cemented paste backfill: Links to mixing time, Constr. Build. Mater., 324(2022), art. No. 126688.

[12] Collet R, Oulahna D, De Ryck A, Jezequel PH, Martin M. Mixing of a wet granular medium: Effect of the particle size, the liquid and the granular compacity on the intensity consumption. Chem. Eng. J., 2010, 164(2–3): 299.

[13] Kim JH, Yim HJ, Ferron RD. In situ measurement of the rheological properties and agglomeration on cementitious pastes. J. Rheol., 2016, 60(4): 695.

[14] X. Li, C.P. Li, Z.E. Ruan, B.H. Yan, H.Z. Hou, and L. Chen, Analysis of particle migration and agglomeration in paste mixing based on discrete element method, Constr. Build. Mater., 352(2022), art. No. 129007.

[15] Li CP, Huang ZH, Ruan ZE, Wang SY. Analysis of the research progress in the mechanism of particle mechanics action on the rheological behavior of paste in metal mines. Chin. J. Eng., 2022, 44(8): 1293.

[16] Chen F, Su R, Yang L, et al. Effect of mixing speed on rheological properties of cemented paste backfill. Chin. J. Nonferrous Met., 2022, 32(11): 3541.

[17] X. Li, C.P. Li, B.H. Yan, and H.Z. Hou, Analysis of the influence factors of paste stirring based on discrete element method, Met. Mine, 2021, No. 3, p. 19.

[18] Yang LH. Research on the Rheological Characteristics and the Mechanism of Shear Action during Paste Mixing, 2020, Beijing, University of Science and Technology Beijing.

[19] Ennis BJ, Li J, Robert P. The influence of viscosity on the strength of an axially strained pendular liquid bridge. Chem. Eng. Sci., 1990, 45(10): 3071.

[20] Iveson SM, Wauters PAL, Forrest S, Litster JD, Meesters GMH, Scarlett B. Growth regime map for liquid-bound granules: Further development and experimental validation. Powder Technol., 2001, 117(1–2): 83.

[21] Benali M, Gerbaud V, Hemati M. Effect of operating conditions and physico-chemical properties on the wet granulation kinetics in high shear mixer. Powder Technol., 2009, 190(1–2): 160.

[22] Kristensen H, Holm P, Schaefer T. Mechanical properties of moist agglomerates in relation to granulation mechanisms part I. Deformability of moist, densified agglomerates. Powder Technol., 1985, 44(3): 227.

[23] Takenaka H, Kawashima Y, Hishida JUN. The effects of interfacial physical properties on the cohesive forces of moist powder in air and in liquid. Chem. Pharm. Bull., 1981, 29(9): 2653.

[24] Roussel N, Lemaître A, Flatt RJ, Coussot P. Steady state flow of cement suspensions: A micromechanical state of the art. Cem. Concr. Res., 2010, 40(1): 77.

[25] Wagner NJ, Brady JF. Shear thickening in colloidal dispersions. Phys. Today, 2009, 62(10): 27.

[26] Flatt RJ. Dispersion forces in cement suspensions. Cem. Concr. Res., 2004, 34(3): 399.

[27] Wu W, Giese RF, van Oss CJ. Stability versus flocculation of particle suspensions in water—Correlation with the extended DLVO approach for aqueous systems, compared with classical DLVO theory. Colloids Surf. B, 1999, 14(1–4): 47.

[28] J.R. Royer, D.L. Blair, and S.D. Hudson, Rheological signature of frictional interactions in shear thickening suspensions, Phys. Rev. Lett., 116(2016), No. 18, art. No. 188301.

[29] Clavaud C, Bérut A, Metzger B, Forterre Y. Revealing the frictional transition in shear-thickening suspensions. Proc. Natl. Acad. Sci. USA, 2017, 114(20): 5147.

[30] Franks GV, Zhou ZW, Duin NJ, Boger DV. Effect of interparticle forces on shear thickening of oxide suspensions. J. Rheol., 2000, 44(4): 759.

[31] Mewis J, Wagner NJ. Colloidal Suspension Rheology, 2012, Cambridge, Cambridge University Press.

[32] Gallier S, Lemaire E, Peters F, Lobry L. Rheology of sheared suspensions of rough frictional particles. J. Fluid Mech., 2014, 757, 514.

[33] More RV, Ardekani AM. Roughness induced shear thickening in frictional non-Brownian suspensions: A numerical study. J. Rheol., 2020, 64(2): 283.

[34] É. Guazzelli and O. Pouliquen, Rheology of dense granular suspensions, J. Fluid Mech., 852(2018), art. No. P1.

[35] Mari R, Seto R, Morris JF, Denn MM. Shear thickening, frictionless and frictional rheologies in non-Brownian suspensions. J. Rheol., 2014, 58(6): 1693.

[36] Yammine J, Chaouche M, Guerinet M, Moranville M, Roussel N. From ordinary rhelogy concrete to self compacting concrete: A transition between frictional and hydrodynamic interactions. Cem. Concr. Res., 2008, 38(7): 890.

[37] Nielsen LF. Rheology of some fluid extreme composites: Such as fresh self-compacting concrete. Nord. Concr. Res., 2001, 27, 83.

[38] Coussot P, Ancey C. Rheophysical classification of concentrated suspensions and granular pastes. Phys. Rev. E, 1999, 59(4): 4445.

[39] Yu AB, Feng CL, Zou RP, Yang RY. On the relationship between porosity and interparticle forces. Powder Technol., 2003, 130(1–3): 70.

[40] Burggraeve A, Monteyne T, Vervaet C, Remon JP, De Beer T. Process analytical tools for monitoring, understanding, and control of pharmaceutical fluidized bed granulation: A review. Eur. J. Pharm. Biopharm., 2013, 83(1): 2.

[41] Iveson SM, Litster JD, Hapgood K, Ennis BJ. Nucleation, growth and breakage phenomena in agitated wet granulation processes: A review. Powder Technol., 2001, 117(1–2): 3.

[42] Suresh P, Sreedhar I, Vaidhiswaran R, Venugopal A. A comprehensive review on process and engineering aspects of pharmaceutical wet granulation. Chem. Eng. J., 2017, 328, 785.

[43] Leuenberger H, Puchkov M, Krausbauer E, Betz G. Manufacturing pharmaceutical granules: Is the granulation end-point a myth?. Powder Technol., 2009, 189(2): 141.

[44] Lievano D, Velankar S, McCarthy JJ. The rupture force of liquid bridges in two and three particle systems. Powder Technol., 2017, 313, 18.

[45] Flemmer CL. On the regime boundaries of moisture in granular materials. Powder Technol., 1991, 66(2): 191.

[46] Vo TT, Mutabaruka P, Nezamabadi S, et al. Mechanical strength of wet particle agglomerates. Mech. Res. Commun., 2018, 92, 1.

[47] Jarvis P, Jefferson B, Gregory J, Parsons SA. A review of floc strength and breakage. Water Res., 2005, 39(14): 3121.

[48] Reynolds GK, Fu JS, Cheong YS, Hounslow MJ, Salman AD. Breakage in granulation: A review. Chem. Eng. Sci., 2005, 60(14): 3969.

[49] Ramaker JS, Jelgersma MA, Vonk P, Kossen NWF. Scale-down of a high-shear pelletisation process: Flow profile and growth kinetics. Int. J. Pharm., 1998, 166(1): 89.

[50] Ferron RD, Shah S, Fuente E, Negro C. Aggregation and breakage kinetics of fresh cement paste. Cem. Concr. Res., 2013, 50, 1.

[51] Wallevik JE. Rheological properties of cement paste: Thixotropic behavior and structural breakdown. Cem. Concr. Res., 2009, 39(1): 14.

[52] Hiremath PN, Yaragal SC. Influence of mixing method, speed and duration on the fresh and hardened properties of Reactive Powder Concrete. Constr. Build. Mater., 2017, 141, 271.

[53] Cazacliu B, Roquet N. Concrete mixing kinetics by means of power measurement. Cem. Concr. Res., 2009, 39(3): 182.

[54] Jiao D, Shi C, Yuan Q. Influences of shear-mixing rate and fly ash on rheological behavior of cement pastes under continuous mixing. Constr. Build. Mater., 2018, 188, 170.

[55] Han D, Ferron RD. Influence of high mixing intensity on rheology, hydration, and microstructure of fresh state cement paste. Cem. Concr. Res., 2016, 84, 95.

[56] Brown E, Jaeger HM. Through thick and thin. Science, 2011, 333(6047): 1230.

[57] H.J. Wang, L.H. Yang, H. Li, X. Zhou, and X.T. Wang, Using coupled rheometer-FBRM to study rheological properties and microstructure of cemented paste backfill, Adv. Mater. Sci. Eng., 2019(2019), art. No. 6813929.

[58] L.H. Yang, H.J. Wang, H. Li, and X. Zhou, Effect of high mixing intensity on rheological properties of cemented paste backfill, Minerals, 9(2019), No. 4, art. No. 240.

[59] Yang M, Jennings HM. Influences of mixing methods on the microstructure and rheological behavior of cement paste. Adv. Cem. Based Mater., 1995, 2(2): 70.

[60] L.H. Yang, H.J. Wang, A.X. Wu, et al., Effect of mixing time on hydration kinetics and mechanical property of cemented paste backfill, Constr. Build. Mater., 247(2020), art. No. 118516.

[61] Min CD, Li XB, He SY, et al. Effect of mixing time on the properties of phosphogypsum-based cemented backfill. Constr. Build. Mater., 2019, 210, 564.

[62] Larrard FD. Concrete Mixture Proportioning: A Scientific Approach, 1999, London, CRC Press

[63] Lecompte T, Perrot A, Picandet V, Bellegou H, Amziane S. Cement-based mixes: Shearing properties and pore pressure. Cem. Concr. Res., 2012, 42(1): 139.

[64] S. Cao, E. Yilmaz, and W.D. Song, Evaluation of viscosity, strength and microstructural properties of cemented tailings backfill, Minerals, 8(2018), No. 8, art. No. 352.

[65] Wang SY, Wu AX, Ruan ZE, Chen SM. Rheological properties of paste slurry and influence factors based on pipe loop test. J. Cent. South Univ. Sci. Technol., 2018, 49(10): 2519.

[66] Ruan ZE, Wu AX, Bürger R, et al. Effect of interparticle interactions on the yield stress of thickened flocculated copper mineral tailings slurry. Powder Technol., 2021, 392, 278.

[67] Xiao BL, Fall M, Roshani A. Towards understanding the rheological properties of slag-cemented paste backfill. Int. J. Min. Reclam. Environ., 2021, 35(4): 268.

[68] G. Jiang, A. Wu, Y. Wang, and J. Li, The rheological behavior of paste prepared from hemihydrate phosphogypsum and tailing, Constr. Build. Mater., 229(2019), art. No. 116870.

[69] General Administration of Quality Supervision, People’s Republic of China, GB/T39489-2020. Technical Specification for the Total Tailings Paste Backfill, 2020, Beijing, Standards Press of China.

[70] Jiao DW, Shi CJ, Yuan Q, An XP, Liu Y, Li H. Effect of constituents on rheological properties of fresh concrete—A review. Cem. Concr. Compos., 2017, 83, 146.

[71] Yang LH, Wang HJ, Wu AX, Xing P, Gao HW. Thixotropy of unclassified pastes in the process of stirring and shearing. Chin. J. Eng., 2016, 38(10): 1343.

[72] Xu WB, Yang BG, Yang SL, Dang P. Experimental study on correlativity between rheological parameters and grain grading of coal gauge backfill slurry. J. Cent. South Univ. Sci. Technol., 2016, 47(4): 1282.

[73] Wu AX, Wang HJ. Theory and Technology of Paste Backfill in Metal Mines, 2015, Beijing, Science Press.

[74] Sofra F. Rheological properties of fresh cemented paste tailings. Paste Tailings Management, 2017, Switzerland, Springer International Publishing, 33.

[75] Liu XH, Wu AX, Wang HJ, Wang YM. Influence mechanism and calculation model of CPB rheological parameters. Chin. J. Eng., 2017, 39(2): 190.

[76] Roussel N. Steady and transient flow behaviour of fresh cement pastes. Cem. Concr. Res., 2005, 35(9): 1656.

[77] Wong V, Chan KW, Kwan AKH. Applying theories of particle packing and rheology to concrete for sustainable development. Organiz. Technol. Manage. Constr. Int. J., 2013, 5(2): 844.

[78] Kwan AKH, Chan KW, Wong V. A 3-parameter particle packing model incorporating the wedging effect. Powder Technol., 2013, 237, 172.

[79] Liu DM. Particle packing and rheological property of highly-concentrated ceramic suspensions: φ _m determination and viscosity prediction. J. Mater. Sci., 2000, 35(21): 5503.

[80] R.D. Hooton, M.R. Geiker, M. Brandl, L.N. Thrane, and L.F. Nielsen, On the effect of coarse aggregate fraction and shape on the rheological properties of self-compacting concrete, Cement Concrete Aggr., 24(2002), No. 1, art. No. 3.

[81] Long HC, Xia JX, Cao B. Effect of coarse/fine materials ratio on rheological properties. Min. Metall. Eng., 2017, 37(2): 6.

[82] Wang HJ, Li GC, Wu AX, et al. Study on rheological properties of paste with different corase aggregate. Min. Res. Dev., 2014, 34(7): 59.

[83] Liu Y, Li JP, Lu Y, Zhou YM. Experimental studying of coal gangue large particle size coarse aggregate ratio to filling paste property. Coal Min. Technol., 2016, 21(5): 1.

[84] Hu J, Wang K. Effect of coarse aggregate characteristics on concrete rheology. Constr. Build. Mater., 2011, 25(3): 1196.

[85] Wu J, Feng M, Mao X, et al. Particle size distribution of aggregate effects on mechanical and structural properties of cemented rockfill: Experiments and modeling. Constr. Build. Mater., 2018, 193, 295.

[86] J. Wu, H. Jing, Y. Gao, Q. Meng, Q. Yin, and Y. Du, Effects of carbon nanotube dosage and aggregate size distribution on mechanical property and microstructure of cemented rockfill, Cem. Concr. Compos., 127(2022), art. No. 104408.

[87] Wu AX, Li H, Cheng HY, Wang YM, Li CP, Ruan ZE. Status and prospects of researches on rheology of paste backfill using unclassified tailings (Part 1): Concepts, characteristics and models. Chin. J. Eng., 2020, 42(7): 803.

[88] Barnes HA. Thixotropy—A review. J. Non-Newton. Fluid Mech., 1997, 70(1–2): 1.

[89] Vance K, Sant G, Neithalath N. The rheology of cementitious suspensions: A closer look at experimental parameters and property determination using common rheological models. Cem. Concr. Compos., 2015, 59, 38.

[90] Qian Y, Kawashima S. Distinguishing dynamic and static yield stress of fresh cement mortars through thixotropy. Cem. Concr. Compos., 2018, 86, 288.

[91] Chateau X, Ovarlez G, Trung KL. Homogenization approach to the behavior of suspensions of noncolloidal particles in yield stress fluids. J. Rheol., 2008, 52(2): 489.

[92] Li CP, Yan BH, Hou HZ. Rheological behavior of solid-liquid conversion stage of unclassified tailings backfill paste. Chin. J. Nonferrous Met., 2020, 30(5): 1209.

[93] Cheng HY, Wu SC, Zhang XQ, Wu AX. Effect of particle gradation characteristics on yield stress of cemented paste backfill. Int. J. Miner. Metall. Mater., 2020, 27(1): 10.

[94] Wu A, Wang Y, Wang H. Estimation model for yield stress of fresh uncemented thickened tailings: Coupled effects of true solid density, bulk density, and solid concentration. Int. J. Miner. Process., 2015, 143, 117.

[95] T.D. Nguyen, T.H. Tran, and N.D. Hoang, Prediction of interface yield stress and plastic viscosity of fresh concrete using a hybrid machine learning approach, Adv. Eng. Inform., 44(2020), art. No. 101057.

[96] Y.H. Niu, H.Y. Cheng, S.C. Wu, J.L. Sun, and J.X. Wang, Rheological properties of cemented paste backfill and the construction of a prediction model, Case Stud. Constr. Mater., 16(2022), art. No. e01140.

[97] Worrall WE, Tuliani S. Viscosity changes during the ageing of clay-water suspensions. Trans. Brit. Ceram. Soc., 1964, 63, 167.

[98] Toorman EA. Modelling the thixotropic behaviour of dense cohesive sediment suspensions. Rheol. Acta, 1997, 36(1): 56.

[99] Roussel N. A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cem. Concr. Res., 2006, 36(10): 1797.

[100] L.F. Zhang, H.J. Wang, A.X. Wu, B. Klein, and X.J. Zhang, A constitutive model for thixotropic cemented tailings backfill pastes, J. Non-Newton. Fluid Mech., 295(2021), art. No. 104548.

[101] Flatt RJ, Bowen P. Yodel: A yield stress model for suspensions. J. Am. Ceram. Soc., 2006, 89(4): 1244.

[102] Peng ZB, Doroodchi E, Moghtaderi B, Evans GM. A DEM-based analysis of the influence of aggregate structure on suspension shear yield stress. Adv. Powder Technol., 2012, 23(4): 437.

[103] Coussot P, Nguyen QD, Huynh HT, Bonn D. Viscosity bifurcation in thixotropic, yielding fluids. J. Rheol., 2002, 46(3): 573.

[104] Møller PCF, Mewis J, Bonn D. Yield stress and thixotropy: On the difficulty of measuring yield stresses in practice. Soft Matter, 2006, 2(4): 274.