Dielectric loss enhancement induced by the microstructure of CoFe₂O₄ foam to realize broadband electromagnetic wave absorption

Abstract

CoFe₂O₄ has been widely used for electromagnetic wave absorption owing to its high Snoek limit, high anisotropy, and suitable saturation magnetization; however, its inherent shortcomings, including low dielectric loss, high density, and magnetic agglomeration, limit its application as an ideal absorbent. This study investigated a microstructure regulation strategy to mitigate the inherent disadvantages of pristine CoFe₂O₄ synthesized via a sol–gel auto-combustion method. A series of CoFe₂O₄ foams (S0.5, S1.0, and S1.5, corresponding to foams with citric acid (CA)-to-Fe(NO₃)₃·9H₂O molar ratios of 0.5, 1.0, and 1.5, respectively) with two-dimensional (2D) curved surfaces were obtained through the adjustment of CA-to-Fe³⁺ ratio, and the electromagnetic parameters were adjusted through morphology regulation. Owing to the appropriate impedance matching and conductance loss provided by moderate complex permittivity, the effective absorption bandwidth (EAB) of S0.5 was as high as 7.3 GHz, exceeding those of most CoFe₂O₄-based absorbents. Moreover, the EAB of S1.5 reached 5.0 GHz (8.9–13.9 GHz), covering most of the X band, owing to the intense polarization provided by lattice defects and the heterogeneous interface. The three-dimensional (3D) foam structure circumvented the high density and magnetic agglomeration issues of CoFe₂O₄ nanoparticles, and the good conductivity of 2D curved surfaces could effectively elevate the complex permittivity to ameliorate the dielectric loss of pure CoFe₂O₄. This study provides a novel idea for the theoretical design and practical production of lightweight and broadband pure ferrites.

Keywords

CoFe₂O₄ foam / lightweight / broadband absorption / microstructure regulation / dielectric loss

References

[1] H.S. Liang, L.M. Zhang, and H.J. Wu, Exploration of twin-modified grain boundary engineering in metallic copper predominated electromagnetic wave absorber, Small, 18(2022), No. 38, art. No. 2203620.

[2] M. Qin, L.M. Zhang, and H.J. Wu, Dielectric loss mechanism in electromagnetic wave absorbing materials, Adv. Sci., 9(2022), No. 10, art. No. 2105553.

[3] Z.H. Zhao, L.M. Zhang, and H.J. Wu, Hydro/organo/ionogels: “controllable” electromagnetic wave absorbers, Adv. Mater., 34(2022), No. 43, art. No. 2205376.

[4] Liang HS, Xing H, Ma ZH, Wu HJ. Tailoring high-electroconductivity carbon cloth coated by nickel cobaltate/nickel oxide: A case of transition from microwave shielding to absorption. Carbon, 2021, 183, 138.

[5] H.S. Liang, H. Xing, M. Qin, and H.J. Wu, Bamboo-like short carbon fibers@Fe₃O₄@phenolic resin and honeycomb-like short carbon fibers@Fe₃O₄@FeO composites as high-performance electromagnetic wave absorbing materials, Composites Part A, 135(2020), art. No. 105959.

[6] J.L. Liu, L.M. Zhang, and H.J. Wu, Enhancing the low/middle-frequency electromagnetic wave absorption of metal sulfides through F⁻ regulation engineering, Adv. Funct. Mater., 32(2022), No. 13, art. No. 2110496.

[7] X.B. Xie, B.L. Wang, Y.K. Wang, C. Ni, X.Q. Sun, and W. Du, Spinel structured MFe₂O₄ (M=Fe, Co, Ni, Mn, Zn) and their composites for microwave absorption: A review, Chem. Eng. J., 428(2022), art. No. 131160.

[8] Sonu Dutta V, Sharma S, et al. Review on augmentation in photocatalytic activity of CoFe₂O₄ via heterojunction formation for photocatalysis of organic pollutants in water. J. Saudi Chem. Soc., 2019, 23(8): 1119.

[9] S. Golchinvafa, S.M. Masoudpanah, and M. Jazirehpour, Magnetic and microwave absorption properties of FeCo/CoFe₂O₄ composite powders, J. Alloys Compd., 809(2019), art. No. 151746.

[10] Mahdikhah V, Ataie A, Babaei A, Sheibani S, Ow-Yang CW, Abkenar SK. CoFe₂O₄/Fe magnetic nanocomposite: Exchange coupling behavior and microwave absorbing property. Ceram. Int., 2020, 46(11): 17903.

[11] Zhang SL, Jiao QZ, Zhao Y, Li HS, Wu Q. Preparation of rugby-shaped CoFe₂O₄ particles and their microwave absorbing properties. J. Mater. Chem. A, 2014, 2(42): 18033.

[12] M. Qin, L.M. Zhang, X.R. Zhao, and H.J. Wu, Defect induced polarization loss in multi-shelled spinel hollow spheres for electromagnetic wave absorption application, Adv. Sci., 8(2021), No. 8, art. No. 2004640.

[13] Liu Y, Chen Z, Zhang Y, et al. Broadband and lightweight microwave absorber constructed by in situ growth of hierarchical CoFe₂O₄/reduced graphene oxide porous nanocomposites. ACS Appl. Mater. Interfaces, 2018, 10(16): 13860.

[14] Wang XY, Zhu T, Chang SC, Lu YK, Mi WB, Wang W. 3D nest-like architecture of core-shell CoFe₂O₄@1T/2H-MoS₂ composites with tunable microwave absorption performance. ACS Appl. Mater. Interfaces, 2020, 12(9): 11252.

[15] Cui XQ, Liu W, Gu WH, Liang XH, Ji GB. Two-dimensional MoS₂ modified using CoFe₂O₄ nanoparticles with enhanced microwave response in the X and Ku band. Inorg. Chem. Front., 2019, 6(2): 590.

[16] Zhu T, Chang SC, Song YF, Lahoubi M, Wang W. PVP-encapsulated CoFe₂O₄/rGO composites with controllable electromagnetic wave absorption performance. Chem. Eng. J., 2019, 373, 755.

[17] Yadav P, Rattan S, Tripathi A, Kumar S. Tailoring of complex permittivity, permeability, and microwave-absorbing properties of CoFe₂O₄/NG/PMMA nanocomposites through swift heavy ions irradiation. Ceram. Int., 2020, 46(1): 317.

[18] J. He, S. Liu, L.W. Deng, et al., Tunable electromagnetic and enhanced microwave absorption properties in CoFe₂O₄ decorated Ti₃C₂ MXene composites, Appl. Surf. Sci., 504(2020), art. No. 144210.

[19] Zhang N, Liu XD, Huang Y, et al. Novel nanocomposites of cobalt ferrite covalently-grafted on graphene by amide bond as superior electromagnetic wave absorber. J. Colloid Interface Sci., 2019, 540, 218.

[20] Li XH, Feng J, Du YP, et al. One-pot synthesis of CoFe₂O₄/graphene oxide hybrids and their conversion into FeCo/graphene hybrids for lightweight and highly efficient microwave absorber. J. Mater. Chem. A, 2015, 3(10): 5535.

[21] J.T. Zhou, R.Y. Tan, Z.J. Yao, H.Y. Lin, and Z. Li, Preparation of CoFe₂O₄ hollow spheres with carbon sphere templates and their wave absorption performance, Mater. Chem. Phys., 244(2020), art. No. 122697.

[22] W.J. Ma, P. He, T.Y. Wang, et al., Microwave absorption of carbonization temperature-dependent uniform yolk-shell H-Fe₃O₄@C microspheres, Chem. Eng. J., 420(2021), art. No. 129875.

[23] X.F. Yang, M.M. Liu, Y.Q. Lan, et al., Cu²⁺ induced self-assembly of urchin-like Co_1−xCu_x into hollow microspheres toward wideband and thin microwave absorbers, Chem. Eng. J., 426(2021), art. No. 130779.

[24] M. Qin, L.M. Zhang, X.R. Zhao, and H.J. Wu, Lightweight Ni foam-based ultra-broadband electromagnetic wave absorber, Adv. Funct. Mater., 31(2021), No. 30, art. No. 2103436.

[25] Ni X, He ZZ, Liu X, et al. Ionic liquid-assisted solvothermal synthesis of hollow CoFe₂O₄ microspheres and their absorbing performances. Mater. Lett., 2017, 193, 232.

[26] Q. Chang, H.S. Liang, B. Shi, and H.J. Wu, Microstructure induced dielectric loss in lightweight Fe₃O₄ foam for electromagnetic wave absorption, iScience, 25(2022), No. 3, art. No. 103925.

[27] Zhao ZH, Zhou XJ, Kou KC, Wu HJ. PVP-assisted transformation of ZIF-67 into cobalt layered double hydroxide/carbon fiber as electromagnetic wave absorber. Carbon, 2021, 173, 80.

[28] J. Zhou, X.F. Shu, Y.Q. Wang, et al., Enhanced microwave absorption properties of (1−x)CoFe₂O₄/xCoFe composites at multiple frequency bands, J. Magn. Magn. Mater., 493(2020), art. No. 165699.

[29] Chang Q, Liang HS, Shi B, Wu HJ. Sodium oxalate-induced hydrothermal synthesis of wood-texture-column-like NiCo₂O₄ with broad bandwidth electromagnetic wave absorption performance. J. Colloid Interface Sci., 2021, 600, 49.

[30] Chang Q, Liang HS, Shi B, et al. Ethylenediamine-assisted hydrothermal synthesis of NiCo₂O₄ absorber with controlled morphology and excellent absorbing performance. J. Colloid Interface Sci., 2021, 588, 336.

[31] M. Zhang, J.H. Zhang, H. Lin, et al., Designable synthesis of reduced graphene oxide modified using CoFe₂O₄ nanospheres with tunable enhanced microwave absorption performances between the whole X and Ku bands, Composites Part B, 190(2020), art. No. 107902.

[32] Y.J. Li, M.W. Yuan, H.H. Liu, and G.B. Sun, In situ synthesis of CoFe₂O₄ nanocrystals decorated in mesoporous carbon nanofibers with enhanced electromagnetic performance, J. Alloys Compd., 826(2020), art. No. 154147.

[33] J.K. Liu, Z.R. Jia, W.H. Zhou, et al., Self-assembled MoS₂/magnetic ferrite CuFe₂O₄ nanocomposite for high-efficiency microwave absorption, Chem. Eng. J., 429(2022), art. No. 132253.

[34] Varma PCR, Manna RS, Banerjee D, Varma MR, Suresh KG, Nigam AK. Magnetic properties of CoFe₂O₄ synthesized by solid state, citrate precursor and polymerized complex methods: A comparative study. J. Alloys Compd., 2008, 453(1–2): 298.

[35] R. Han, W. Li, W.W. Pan, M.G. Zhu, D. Zhou, and F.S. Li, 1D magnetic materials of Fe₃O₄ and Fe with high performance of microwave absorption fabricated by electrospinning method, Sci. Rep., 4(2014), art. No. 7493.

[36] X.Y. Wang, Y.K. Lu, T. Zhu, S.C. Chang, and W. Wang, CoFe₂O₄/N-doped reduced graphene oxide aerogels for highperformance microwave absorption, Chem. Eng. J., 388(2020), art. No. 124317.

[37] Zhang N, Huang Y, Zong M, Ding X, Li SP, Wang MY. Synthesis of ZnS quantum dots and CoFe₂O₄ nanoparticles co-loaded with graphene nanosheets as an efficient broad band EM wave absorber. Chem. Eng. J., 2017, 308, 214.

[38] Zhang XY, Xia L, Zhong B, et al. Three-dimensional reduced graphene oxide/CoFe₂O₄ composites loaded with LAS particles for lightweight and enhanced microwave absorption properties. J. Alloys Compd., 2019, 799, 368.

[39] Li WX, Wang LC, Li GM, Xu Y. Single-crystal octahedral CoFe₂O₄ nanoparticles loaded on carbon balls as a lightweight microwave absorbent. J. Alloys Compd., 2015, 633, 11.

[40] H.J. Wu, M. Qin, and L.M. Zhang, NiCo₂O₄ constructed by different dimensions of building blocks with superior electromagnetic wave absorption performance, Composites Part B, 182(2020), art. No. 107620.

[41] F. Pan, Z.C. Liu, B.W. Deng, et al., Lotus leaf-derived gradient hierarchical porous C/MoS₂ morphology genetic composites with wideband and tunable electromagnetic absorption performance, Nano-Micro Lett., 13(2021), No. 1, art. No. 43.

[42] Liu R, An ZG, Liao B, Zhang JJ. FeNi alloy and nickel ferrite codoped carbon hollow microspheres for high-efficiency microwave absorption. J. Mater. Chem. C, 2022, 10(15): 6085.

[43] Liu XD, Huang Y, Ding L, Zhao XX, Liu PB, Li TH. Synthesis of covalently bonded reduced graphene oxide-Fe₃O₄ nanocomposites for efficient electromagnetic wave absorption. J. Mater. Sci. Technol., 2021, 72, 93.

[44] Z.G. Gao, Z.R. Jia, K.K. Wang, X.H. Liu, L. Bi, and G.L. Wu, Simultaneous enhancement of recoverable energy density and efficiency of lead-free relaxor-ferroelectric BNT-based ceramics, Chem. Eng. J., 402(2020), art. No. 125951.

[45] M.M. Zhang, Z.Y. Jiang, X.Y. Lv, et al., Microwave absorption performance of reduced graphene oxide with negative imaginary permeability, J. Phys. D: Appl. Phys., 53(2020), No. 2, art. No. 02LT01.

[46] L.W. Wu, Y. Lu, W. Shao, H.Y. Wei, G.X. Tong, and W.H. Wu, Simple salt-template assembly for layered heterostructures of C/ferrite and EG/C/MFe₂O₄ (M = Fe, Co, Ni, Zn) nanoparticle arrays toward superior microwave absorption capabilities, Adv. Mater. Interfaces, 7(2020), No. 18, art. No. 2000736.

[47] Ren LG, Wang YQ, Zhang X, He QC, Wu GL. Efficient microwave absorption achieved through in situ construction of core-shell CoFe₂O₄@mesoporous carbon hollow spheres. Int. J. Miner. Metall. Mater., 2023, 30(3): 504.

[48] Gao ZG, Yang K, Zhao ZH, et al. Design principles in MOF-derived electromagnetic wave absorption materials: Review and perspective. Int. J. Miner. Metall. Mater., 2023, 30(3): 405.

[49] Li GM, Xue XJ, Mao LT, et al. Recycling and utilization of coal gasification residues for fabricating Fe/C composites as novel microwave absorbents. Int. J. Miner. Metall. Mater., 2023, 30(3): 591.

[50] Zhou YY, Bai ZY, Yang XY, et al. In-situ grown NiCo bimetal anchored on porous straw-derived biochar composites with boosted microwave absorption properties. Int. J. Miner. Metall. Mater., 2023, 30(3): 515.

[51] H.S. Liang, G. Chen, D. Liu, et al., Exploring the Ni 3d orbital unpaired electrons induced polarization loss based on Ni singleatoms model absorber, Adv. Funct. Mater., 33(2023), No. 7, art. No. 2212604.

[52] Feng X, Yin PF, Zhang LM, et al. Innovative preparation of Co@CuFe₂O₄ composite via ball-milling assisted chemical precipitation and annealing for glorious electromagnetic wave absorption. Int. J. Miner. Metall. Mater., 2023, 30(3): 559.

[53] Liu QH, Cao Q, Bi H, et al. CoNi@SiO₂@TiO₂ and CoNi@air@TiO₂ microspheres with strong wideband microwave absorption. Adv. Mater., 2016, 28(3): 486.

[54] R.C. Che, C.Y. Zhi, C.Y. Liang, and X.G. Zhou, Fabrication and microwave absorption of carbon nanotubes/CoFe₂O₄ spinel nanocomposite, Appl. Phys. Lett., 88(2006), No. 3, art. No. 033105.