Perspective on low-temperature electrolytes for LiFePO₄-based lithium-ion batteries

Abstract

The olivine-type lithium iron phosphate (LiFePO₄) cathode material is promising and widely used as a high-performance lithium-ion battery cathode material in commercial batteries due to its low cost, environmental friendliness, and high safety. At present, LiFePO₄/C secondary batteries are widely used for electronic products, automotive power batteries, and other occasion-related applications with good thermal stability, stable cycle performance, and low room-temperature self-discharge rate. However, LiFePO₄-based battery applications are seriously limited when they are operated in a cold climate. This outcome is due to a considerable decrease in Li⁺ transport capabilities within the electrode, particularly leading to a dramatic decrease in the electrochemical capacity and power performance of the electrolyte. Therefore, the design of low-temperature electrolytes is important for the further commercial application of LiFePO₄ batteries. This paper reviews the key factors for the poor low-temperature performance of LiFePO₄-based batteries and the research progress of low-temperature electrolytes. Special attention is paid to electrolyte components, including lithium salts, cosolvents, additives, and the development of new electrolytes. The factors affecting the anode are also analyzed. Finally, according to the current research progress, some viewpoints are summarized to provide suitable modification methods and research suggestions for improving the practicability of LiFePO₄/C commercial batteries at low temperatures in the future.

Keywords

lithium-ion batteries / LiFePO₄ / electrolytes / low-temperature / electrochemical performance

References

[1] Adv. Energy Mater., 2021, 11(16) art. No. 2003804

[2] Angew. Chem. Int. Ed., 2022, 61(27) art. No. e202205091

[3] Yang L, Deng WT, Xu W, Tian Y, Wang AN, Wang BW, Zou GQ, Hou HS, Deng WN, Ji XB. Olivine LiM-n_xFe_1−xPO₄ cathode materials for lithium ion batteries: Restricted factors of rate performances. J. Mater. Chem. A, 2021, 9(25): 14214.

[4] Yang C, Zhang JL, Jing QK, Liu YB, Chen YQ, Wang CY. Recovery and regeneration of LiFePO₄ from spent lithium-ion batteries via a novel pretreatment process. Int. J. Miner. Metall. Mater., 2021, 28(9): 1478.

[5] Zhu GL, Wen KC, Lv WQ, Zhou XZ, Liang YC, Yang F, Chen ZL, Zou MD, Li JC, Zhang YQ, He WD. Materials insights into low-temperature performances of lithium-ion batteries. J. Power Sources, 2015, 300, 29.

[6] Zhou CC, Su Z, Gao XL, Cao R, Yang SC, Liu XH. Ultra-high-energy lithium-ion batteries enabled by aligned structured thick electrode design. Rare Met., 2022, 41(1): 14.

[7] Yang SC, He R, Zhang ZJ, Cao YG, Gao XL, Liu XH. Chain: Cyber hierarchy and interactional network enabling digital solution for battery full-lifespan management. Matter, 2020, 3(1): 27.

[8] Wei BB, Wu YB, Yu FY, Zhou YN. Preparation and electrochemical properties of carbon-coated LiFePO₄ hollow nanofibers. Int. J. Miner. Metall. Mater., 2016, 23(4): 474.

[9] Wang YH, Mei R, Yang XM. Enhanced electrochemical properties of LiFePO₄/C synthesized with two kinds of carbon sources, PEG-4000 (organic) and Super p (inorganic). Ceram. Int., 2014, 40(6): 8439.

[10] Burba CM, Frech R. Local structure in the Li-ion battery cathode material Li_x(Mn_yFe_1−y)PO₄ for 0<x≤1 and y = 0.0, 0.5, and 1.0. J. Power Sources, 2007, 172(2): 870.

[11] S.Q. Zhu, Improving methods for better performance of commercial LiFePO₄/C batteries, Int. J. Electrochem. Sci., 16(2021), art. No. 210564.

[12] B.F. Zhang, Y.L. Xu, J. Wang, X.N. Ma, W.Q. Hou, and X. Xue, Electrochemical performance of LiFePO₄/graphene composites at low temperature affected by preparation technology, Electrochim. Acta, 368(2021), art. No. 137575.

[13] Lv YJ, Huang B, Tan JX, Jiang SQ, Zhang SF, Wen YX. Enhanced low temperature electrochemical performances of LiFePO₄/C by V³⁺ and F⁻ co-doping. Mater. Lett., 2018, 229, 349.

[14] Xie D, Cai GL, Liu ZC, Guo RS, Sun DD, Zhang C, Wan YZ, Peng JH, Jiang H. The low temperature electrochemical performances of LiFePO₄/C/graphene nanofiber with 3D-bridge network structure. Electrochim. Acta, 2016, 217, 62.

[15] Gu XX, Qiao S, Ren XL, Liu XY, He YZ, Liu XT, Liu TF. Multi-core-shell-structured LiFePO₄@Na₃V₂(PO₄)₃ @C composite for enhanced low-temperature performance of lithium-ion batteries. Rare Met., 2021, 40(4): 828.

[16] Liu JY, Lin XR, Han TL, Li XX, Gu CP, Li JJ. A novel litchi-like LiFePO₄ sphere/reduced graphene oxide composite Li-ion battery cathode with high capacity, good rate-performance and low-temperature property. Appl. Surf. Sci., 2018, 459, 233.

[17] Yao B, Ding ZJ, Zhang JX, Feng XY, Yin LW. Encapsulation of LiFePO₄ by in-situ graphitized carbon cage towards enhanced low temperature performance as cathode materials for lithium ion batteries. J. Solid State Chem., 2014, 216, 9.

[18] Kang X. Electrolytes and interphases in Li-ion batteries and beyond. Chem. Rev., 2014, 114(23): 11503.

[19] Gao XL, Liu XH, Xie WL, Zhang LS, Yang SC. Multiscale observation of Li plating for lithium-ion batteries. Rare Met., 2021, 40(11): 3038.

[20] Liao XZ, Ma ZF, Gong Q, He YS, Pei L, Zeng LJ. Low-temperature performance of LiFePO₄/C cathode in a quaternary carbonate-based electrolyte. Electrochem. Commun., 2008, 10(5): 691.

[21] Yan MY, Zhang GB, Wei QL, Tian XC, Zhao KN, An QY, Zhou L, Zhao YL, Niu CJ, Ren WH, He L, Mai LQ. In operando observation of temperature-dependent phase evolution in lithium-incorporation olivine cathode. Nano Energy, 2016, 22, 406.

[22] Petzl M, Kasper M, Danzer MA. Lithium plating in a commercial lithium-ion battery: A low-temperature aging study. J. Power Sources, 2015, 275, 799.

[23] Ouyang MG, Chu ZY, Lu LG, Li JQ, Han XB, Feng XN, Liu GM. Low temperature aging mechanism identification and lithium deposition in a large format lithium iron phosphate battery for different charge profiles. J. Power Sources, 2015, 286, 309.

[24] Adv. Energy Mater., 2019, 9(6) art. No. 1802946

[25] J. Electrochem. Soc., 2008, 155(2) art. No. A144

[26] Yu DYW, Fietzek C, Weydanz W, Donoue K, Inoue T, Kurokawa H, Fujitani S. Study of LiFePO₄ by cyclic voltammetry. J. Electrochem. Soc., 2007, 154(4): A253.

[27] Yang Z, Huang Q, Li SJ, Mao J. High-temperature effect on electrochemical performance of Li₄Ti₅O₁₂ based anode material for Li-ion batteries. J. Alloys Compd., 2018, 753, 192.

[28] Gaberscek M, Dominko R, Jamnik J. Is small particle size more important than carbon coating? An example study on LiFePO₄ cathodes. Electrochem. Commun., 2007, 9(12): 2778.

[29] Zhang SS, Xu K, Jow TR. EIS study on the formation of solid electrolyte interface in Li-ion battery. Electrochim. Acta, 2006, 51(8–9): 1636.

[30] Zhang SS. Electrochemical study of the formation of a solid electrolyte interface on graphite in a LiBC₂O₄F₂-based electrolyte. J. Power Sources, 2007, 163(2): 713.

[31] Ratnakumar BV, Smart MC, Surampudi S. Effects of SEI on the kinetics of lithium intercalation. J. Power Sources, 2001, 97–98, 137.

[32] Mandal BK, Padhi AK, Shi Z, Chakraborty S, Filler R. New low temperature electrolytes with thermal runaway inhibition for lithium-ion rechargeable batteries. J. Power Sources, 2006, 162(1): 690.

[33] Zhou L, Lucht BL. Performance of lithium tetrafluoroox-alatophosphate (LiFOP) electrolyte with propylene carbonate (PC). J. Power Sources, 2012, 205, 439.

[34] Wang GX, Kang HC, Chen M, Yan KP, Hu XS, Cairns EJ. Effects of solvents on the electrochemical performance of LiFePO₄/C composite electrodes. ChemElertroChem, 2017, 4(2): 376.

[35] Zaghib K, Dontigny M, Perret P, Guerfi A, Ramanathan M, Prakash J, Mauger A, Julien CM. Electrochemical and thermal characterization of lithium titanate spinel anode in C-LiFePO₄//C-Li₄Ti₅O₁₂ cells at sub-zero temperatures. J. Power Sources, 2014, 248, 1050.

[36] Xu GJ, Liu ZH, Zhang CJ, Cui GL, Chen LQ. Strategies for improving the cyclability and thermo-stability of LiMn₂O₄-based batteries at elevated temperatures. J. Mater. Chem. A, 2015, 3(8): 4092.

[37] Adv. Mater., 2019, 31(20) art. No. 1970148

[38] J. Electrochem. Soc., 2011, 158(2) art. No. A74

[39] Li J, Yuan CF, Guo ZH, Zhang ZA, Lai YQ, Liu J. Limiting factors for low-temperature performance of electrolytes in LiFePO₄/Li and graphite/Li half cells. Electrochim. Acta, 2012, 59, 69.

[40] Zhang SS, Xu K, Jow TR. A new approach toward improved low temperature performance of Li-ion battery. Electrochem. Commun., 2002, 4(11): 928.

[41] Xu K, Zhang SS, Lee U, Allen JL, Jow TR. LiBOB: Is it an alternative salt for lithium ion chemistry. J. Power Sources, 2005, 146(1–2): 79.

[42] Zhang SS, Xu K, Jow TR. An improved electrolyte for the LiFePO4 cathode working in a wide temperature range. J. Power Sources, 2006, 159(1): 702.

[43] Zhou HM, Liu FR, Li J. Preparation, thermal stability and electrochemical properties of LiODFB. J. Mater. Sci. Technol., 2012, 28(8): 723.

[44] Li SY, Zhao W, Cui XL, Zhao YY, Li BC, Zhang HM, Li YL, Li GX, Ye XS, Luo YC. An improved method for synthesis of lithium difluoro(oxalato)borate and effects of sulfolane on the electrochemical performances of lithium-ion batteries. Electrochim. Acta, 2013, 91, 282.

[45] Li SY, Zhao W, Zhou ZF, Cui XL, Shang ZC, Liu HN, Zhang DQ. Studies on electrochemical performances of novel electrolytes for wide-temperature-range lithium-ion batteries. ACS Appl. Mater. Interfaces, 2014, 6(7): 4920.

[46] Li SY, Li XP, Liu JL, Shang ZC, Cui XL. A low-temperature electrolyte for lithium-ion batteries. Ionics, 2015, 21(4): 901.

[47] Zhang LJ, Sun YX, Zhou Y, Hai CX, Hu SQ, Zeng JB, Shen Y, Dong SD, Qi GC, Li FQ. Investigation of the synergetic effects of LiBF₄ and LiODFB as wide-temperature electrolyte salts in lithium-ion batteries. Ionics, 2018, 24(10): 2995.

[48] Xu G, Shangguan X, Dong S, Zhou X, Cui G. Formulation of blended-lithium-salt electrolytes for lithium batteries. Angew. Chem. Int. Ed., 2020, 59(9): 3400.

[49] Li FQ, Gong Y, Jia GF, Wang QL, Peng ZJ, Fan W, Bai B. A novel dual-salts of LiTFSI and LiODFB in LiFePO₄-based batteries for suppressing aluminum corrosion and improving cycling stability. J. Power Sources, 2015, 295, 47.

[50] Adv. Sci., 2021, 8(18) art. No. e2101051

[51] Liao LX, Cheng XQ, Ma YL, Zuo PJ, Fang W, Yin GP, Gao YZ. Fluoroethylene carbonate as electrolyte additive to improve low temperature performance of LiFePO₄ electrode. Electrochim. Acta, 2013, 87, 466.

[52] Wu BR, Ren YH, Mu DB, Liu XJ, Zhao JC, Wu F. Enhanced electrochemical performance of LiFePO₄ cathode with the addition of fluoroethylene carbonate in electrolyte. J. Solid State Electrochem., 2013, 17(3): 811.

[53] Liao LX, Fang T, Zhou XG, Gao YZ, Cheng XQ, Zhang LL, Yin GP. Enhancement of low-temperature performance of LiFePO₄ electrode by butyl sultone as electrolyte additive. Solid State Ionics, 2014, 254, 27.

[54] Wu BR, Ren YH, Mu DB, Liu XJ, Yang GC, Sun Z. Lithium insertion/desertion properties of LiFePO₄ cathode in a low temperature electrolyte modified with sodium chloride additive. Solid State Ionics, 2014, 260, 8.

[55] Zhao XY, Wang JL, Yan XD, Zhang LZ. Effect of nitrile group functionalized organosilicon as electrolyte additive on low-temperature performance of LiFePO₄ battery. Chem. J. Chin. Univ., 2019, 40(6): 1258.

[56] Rong HB, Xu MQ, Xing LD, Li WS. Enhanced cyclability of LiNi_0.5Mn_1.5O₄ cathode in carbonate-based electrolyte with incorporation of tris(trimethylsilyl)phosphate (TMSP). J. Power Sources, 2014, 261, 148.

[57] Wu BR, Ren YH, Mu DB, Zhang C, Liu X, Wu F. Enhanced low temperature performance of LiFePO₄ cathode with electrolyte modification. Int. J. Electrochem. Sci., 2013, 8, 8502.

[58] Haregewoin AM, Wotango AS, Hwang BJ. Electrolyte additives for lithium ion battery electrodes: Progress and perspectives. Energy Environ. Sci., 2016, 9(6): 1955.

[59] Tron A, Jeong S, Park YD, Mun J. Aqueous lithium-ion battery of nano-LiFePO₄ with antifreezing agent of ethyleneglycol for low-temperature operation. ACS Sustain. Chem. Eng., 2019, 7(17): 14531.

[60] Thenuwara AC, Shetty PP, Kondekar N, Sandoval SE, Cavallaro K, May R, Yang CT, Marbella LE, Qi Y, McDowell MT. Efficient low-temperature cycling of lithium metal anodes by tailoring the solid-electrolyte interphase. ACS Energy Lett., 2020, 5(7): 2411.

[61] Gao TT, Wang B, Wang L, Liu GJ, Wang F, Luo H, Wang DL. LiAlCl₄3SO₂ as a high conductive, non-flammable and inorganic non-aqueous liquid electrolyte for lithium ion batteries. Electrochim. Acta, 2018, 286, 77.

[62] Ye YS, Rick J, Hwang BJ. Ionic liquid polymer electrolytes. J. Mater. Chem. A, 2013, 1(8): 2719.

[63] Böckenfeld N, Willeke M, Pires J, Anouti M, Balducci A. On the use of lithium iron phosphate in combination with protic ionic liquid-based electrolytes. J. Electrochem. Soc., 2013, 160(4): A559.

[64] Moreno JS, Deguchi Y, Panero S, Scrosati B, Ohno H, Simonetti E, Appetecchi GB. N-Alkyl-N-ethylpyrrolidinium cation-based ionic liquid electrolytes for safer lithium battery systems. Electrochim. Acta, 2016, 191, 624.

[65] Zhao Q, Liu X, Stalin S, Khan K, Archer LA. Solidstate polymer electrolytes with in-built fast interfacial transport for secondary lithium batteries. Nat. Energy, 2019, 4(5): 365.

[66] Patil A, Patil V, Shin DW, Choi JW, Paik DS, Yoon SJ. Issue and challenges facing rechargeable thin film lithium batteries. Mater. Res. Bull., 2008, 43(8–9): 1913.

[67] Song JY, Wang YY, Wan CC. Review of gel-type polymer electrolytes for lithium-ion batteries. J. Power Sources, 1999, 77(2): 183.

[68] Zhou D, Shanmukaraj D, Tkacheva A, Armand M, Wang GX. Polymer electrolytes for lithium-based batteries: Advances and prospects. Chem, 2019, 5(9): 2326.

[69] Mindemark J, Lacey MJ, Bowden T, Brandell D. Beyond PEO-alternative host materials for Li+-conducting solid polymer electrolytes. Prog. Polym. Sci., 2018, 81, 114.

[70] Sun ZJ, Li YH, Zhang SY, Shi L, Wu H, Bu HT, Ding SJ. g-C₃N₄ nanosheets enhanced solid polymer electrolytes with excellent electrochemical performance, mechanical properties, and thermal stability. J. Mater. Chem. A, 2019, 7(18): 11069.

[71] Xue ZG, He D, Xie XL. Poly(ethylene oxide)-based electrolytes for lithium-ion batteries. J. Mater. Chem. A, 2015, 3(38): 19218.

[72] Duan H, Yin YX, Zeng XX, Li JY, Shi JL, Shi Y, Wen R, Guo YG, Wan LJ. In-situ plasticized polymer electrolyte with double-network for flexible solid-state lithium-metal batteries. Energy Storage Mater., 2018, 10, 85.

[73] Adv. Funct. Mater., 2020, 30(51) art. No. 2007172

[74] Yu J, Liu JP, Lin XD, Law HM, Zhou GD, Kwok SCT, Robson MJ, Wu JX, Ciucci F. A solid-like dual-salt polymer electrolyte for Li-metal batteries capable of stable operation over an extended temperature range. Energy Storage Mater., 2021, 37, 609.

[75] Zhou JQ, Ji HQ, Qian YJ, Liu J, Yan TY, Yan CL, Qian T. Molecular simulations guided polymer electrolyte towards superior low-temperature solid lithium-metal batteries. ACS Appl. Mater. Interfaces, 2021, 13(41): 48810.

[76] Lin ZH, Liu J. Low-temperature all-solid-state lithium-ion batteries based on a di-cross-linked starch solid electrolyte. RSC Adv., 2019, 9(59): 34601.

[77] Lin ZY, Guo XW, Yu HJ. Amorphous modified silyl-terminated 3D polymer electrolyte for high-performance lithium metal battery. Nano Energy, 2017, 41, 646.

[78] Z.Y. Lin, X.W. Guo, Z.C. Wang, B.Y. Wang, S.M. He, L.A. O’Dell, J. Huang, H. Li, H.J. Yu, and L.Q. Chen, A wide-temperature superior ionic conductive polymer electrolyte for lithium metal battery, Nano Energy, 73(2020), art. No. 104786.

[79] Hu LF, Tang ZL, Zhang ZT. New composite polymer electrolyte comprising mesoporous lithium aluminate nanosheets and PEO/LiClO₄. J. Power Sources, 2007, 166(1): 226.

[80] Hanai K, Maruyama T, Imanishi N, et al. Enhancement of electrochemical performance of lithium dry polymer battery with LiFePO₄/carbon composite cathode. J. Power Sources, 2008, 178(2): 789.

[81] Liu Y, Lee JY, Hong L. In situ preparation of poly(ethylene oxide)-SiO₂ composite polymer electrolytes. J. Power Sources, 2004, 129(2): 303.

[82] Pitawala HMJC, Dissanayake MAKL, Seneviratne VA. Combined effect of Al₂O₃ nano-fillers and EC plasticizer on ionic conductivity enhancement in the solid polymer electrolyte (PEO)₉LiTf. Solid State Ionics, 2007, 178(13–14): 885.

[83] Guan HY, Lian F, Ren Y, Wen Y, Pan XR, Sun JL. Comparative study of different membranes as separators for rechargeable lithium-ion batteries. Int. J. Miner. Metall. Mater., 2013, 20(6): 598.

[84] Lv F, Liu KX, Wang ZY, Zhu JF, Zhao Y, Yuan S. Ultraviolet-cured polyethylene oxide-based composite electrolyte enabling stable cycling of lithium battery at low temperature. J. Colloid Interface Sci., 2021, 596, 257.

[85] Cai WL, Yao YX, Zhu GL, Yan C, Jiang LL, He CX, Huang JQ, Zhang Q. A review on energy chemistry of fast-charging anodes. Chem. Soc. Rev., 2020, 49(12): 3806.

[86] Collins GA, Geaney H, Ryan KM. Alternative anodes for low temperature lithium-ion batteries. J. Mater. Chem. A, 2021, 9(25): 14172.

[87] Friesen A, Hildebrand S, Horsthemke F, Börner M, Klöpsch R, Niehoff P. F.M. Schappacher, and M. Winter, Al₂O₃ coating on anode surface in lithium ion batteries: Impact on low temperature cycling and safety behavior. J. Power Sources, 2017, 363, 70.

[88] Ji Y, Zhang YC, Wang CY. Li-ion cell operation at low temperatures. J. Electrochem. Soc., 2013, 160(4): A636.

[89] Xu J, Wang X, Yuan NY, Hu BQ, Ding JN, Ge SH. Graphite-based lithium ion battery with ultrafast charging and discharging and excellent low temperature performance. J. Power Sources, 2019, 430, 74.

[90] Xu K, von Cresce A, Lee U. Differentiating contributions to “ion transfer” barrier from interphasial resistance and Li⁺ desolvation at electrolyte/graphite interface. Langmuir, 2010, 26(13): 11538.

[91] Zhao L, Hu YS, Li H, Wang ZX, Chen LQ. Porous Li₄Ti₅O₁₂ coated with N-doped carbon from ionic liquids f7or Li-ion batteries. Adv. Mater., 2011, 23(11): 1385.

[92] Pohjalainen E, Rauhala T, Valkeapää M, Kallioinen J, Kallio T. Effect of Li₄Ti₅O₁₂ particle size on the performance of lithium ion battery electrodes at high C-rates and low temperatures. J. Phys. Chem. C, 2015, 119(5): 2277.