Carbonate-activated binder modified by supplementary materials for mine backfill and the associated heavy metal immobilization effects

Abstract

Cemented paste backfill (CPB) is one of the effective methods for resource utilization of tailings, but the high cost of ordinary Portland cement (OPC) limits its utilization. Considering the poor performance of Na₂CO₃-activated binders, in this work, supplementary materials, including CaO, MgO, and calcined layered double hydroxide (CLDH), were used to modify their properties with the aim of finding an alternative binder to OPC. Isothermal calorimetry, X-ray diffraction, and thermogravimetric analyses were conducted to explore the reaction kinetics and phase assembles of the binder. The properties of the CPB samples, such as flowability, strength development, and heavy metal immobilization effects, were then investigated. The results show that the coupling utilization of MgO and CLDH showed good performance. The strength of the Mg₂-CLDH₃ sample was approximately 2.94 MPa after curing for 56 d, which was higher than that of the OPC-based sample. Moreover, the cost of the modified Na₂CO₃-activated binder was lower than that of the OPC-based binder. Modified sample showed satisfactory heavy metal immobilization effects. These findings demonstrate that carbonate-activated binder modified by supplementary materials can be suitable in CPB.

Keywords

tailings / cemented paste backfill / sodium carbonate / environmentally friendly / heavy metals

References

[1] Shang DL, Yin GZ, Li XS, et al. Analysis for green mine (phosphate) performance of China: An evaluation index system. Resour. Policy, 2015, 46, 71.

[2] I.M. Jiskani, Q.X. Cai, W. Zhou, and S.A. Ali Shah, Green and climate-smart mining: A framework to analyze open-pit mines for cleaner mineral production, Resour. Policy, 71(2021), art. No. 102007.

[3] S.Q. Zhang, T.Y. Shi, W. Ni, et al., The mechanism of hydrating and solidifying green mine fill materials using circulating fluidized bed fly ash-slag-based agent, J. Hazard. Mater., 415(2021), art. No. 125625.

[4] Shi HQ. Mine green mining. Energy Procedia, 2012, 16, 409.

[5] Fu ZG, Liao HC. Unbalanced double hierarchy linguistic term set: The TOPSIS method for multi-expert qualitative decision making involving green mine selection. Inf. Fusion, 2019, 51, 271.

[6] S.Y. Zhang, F.Y. Ren, Y.L. Zhao, J.P. Qiu, and Z.B. Guo, The effect of stone waste on the properties of cemented paste backfill using alkali-activated slag as binder, Constr. Build. Mater., 283(2021), art. No. 122686.

[7] S.Y. Zhang, Y.L. Zhao, H.X. Ding, J.P. Qiu, and C. Hou, Effect of sodium chloride concentration and pre-curing time on the properties of cemented paste backfill in a sub-zero environment, J. Cleaner Prod., 283(2021), art. No. 125310.

[8] S.Y. Zhang, Y.L. Zhao, H.X. Ding, J.P. Qiu, and Z.B. Guo, Recycling flue gas desulfurisation gypsum and phosphogypsum for cemented paste backfill and its acid resistance, Constr. Build. Mater., 275(2021), art. No. 122170.

[9] Y.L. Zhao, J.P. Qiu, P.Q. Wu, Z.B. Guo, S.Y. Zhang, and X.G. Sun, Preparing a binder for cemented paste backfill using low-aluminum slag and hazardous oil shale residue and the heavy metals immobilization effects, Powder Technol., 399(2022), art. No. 117167.

[10] Y.L. Zhao, J.P. Qiu, S.Y. Zhang, et al., Recycling of arsenic-containing biohydrometallurgy waste to produce a binder for cemented paste backfill: Mix proportion optimization, Powder Technol., 398(2022), art. No. 117155.

[11] Y. Zhao, A. Soltani, A. Taheri, M. Karakus, and A. Deng, Application of slag–cement and fly ash for strength development in cemented paste backfills, Minerals, 9(2018), No. 1, art. No. 22.

[12] Y. Zhao, A. Taheri, A. Soltani, M. Karakus, and A. Deng, Strength development and strain localization behavior of cemented paste backfills using Portland cement and fly ash, Materials, 12(2019), No. 20, art. No. 3282.

[13] Fernández Á, García Calvo JL, Alonso MC. Ordinary Portland Cement composition for the optimization of the synergies of supplementary cementitious materials of ternary binders in hydration processes. Cem. Concr. Compos., 2018, 89, 238.

[14] Naganathan S, Razak HA, Hamid SNA. Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust. Mater. Des., 2012, 33, 56.

[15] Cihangir F, Ercikdi B, Kesimal A, Turan A, Deveci H. Utilisation of alkali-activated blast furnace slag in paste backfill of high-sulphide mill tailings: Effect of binder type and dosage. Miner. Eng., 2012, 30, 33.

[16] Jiang HQ, Qi ZJ, Yilmaz E, Han J, Qiu JP, Dong CL. Effectiveness of alkali-activated slag as alternative binder on workability and early age compressive strength of cemented paste backfills. Constr. Build. Mater., 2019, 218, 689.

[17] Kang SH, Kwon YH, Hong SG, Chun S, Moon J. Hydrated lime activation on byproducts for eco-friendly production of structural mortars. J. Clean. Prod., 2019, 231, 1389.

[18] Shi CJ, Day RL. Pozzolanic reaction in the presence of chemical activators. Cem. Concr. Res., 2000, 30(1): 51.

[19] Jeon D, Yum WS, Jeong Y, Oh JE. Properties of quick-lime(CaO)-activated Class F fly ash with the use of CaCl₂. Cem. Concr. Res., 2018, 111, 147.

[20] Wang JX, Lyu XJ, Wang LY, Cao XQ, Liu Q, Zang HY. Influence of the combination of calcium oxide and sodium carbonate on the hydration reactivity of alkali-activated slag binders. J. Cleaner Prod., 2018, 171, 622.

[21] Y.L. Zhao, J.P. Qiu, S.Y. Zhang, et al., Effect of sodium sulfate on the hydration and mechanical properties of lime-slag based eco-friendly binders, Constr. Build. Mater., 250(2020), art. No. 118603.

[22] Jiang HQ, Fall M, Yilmaz E, Li YH, Yang L. Effect of mineral admixtures on flow properties of fresh cemented paste backfill: Assessment of time dependency and thixotropy. Powder Technol., 2020, 372, 258.

[23] Chen X, Meawad A, Struble LJ. Method to stop geopolymer reaction. J. Am. Ceram. Soc., 2014, 97(10): 3270.

[24] C09 Committee. Test Method for Compressive Strength of Cylindrical Concrete Specimens, 2021, West Conshohocken, PA, ASTM International.

[25] Y.L. Zhao, X.W. Gu, J.P. Qiu, S.Y. Zhang, Z.B. Guo, and X.G. Sun, Recycling of arsenic-containing biohydrometallurgy waste to produce a binder for cemented paste backfill: Co-treatment with oil shale residue, J. Environ. Manage., 319(2022), art. No. 115621.

[26] Karen Scrivener. A Practical Guide to Microstructural Analysis of Cementitious Materials, 2016, London, Taylor & Francis Group.

[27] Ke XY, Bernal SA, Provis JL. Controlling the reaction kinetics of sodium carbonate-activated slag cements using calcined layered double hydroxides. Cem. Concr. Res., 2016, 81, 24.

[28] N.T. Dung, T.J.N. Hooper, and C. Unluer, Accelerating the reaction kinetics and improving the performance of Na₂CO₃-activated GGBS mixes, Cem. Concr. Res., 126(2019), art. No. 105927.

[29] Bullard JW, Jennings HM, Livingston RA, et al. Mechanisms of cement hydration. Cem. Concr. Res., 2011, 41(12): 1208.

[30] Yuan B, Yu QL, Brouwers HJH. Time-dependent characterization of Na₂CO₃ activated slag. Cem. Concr. Compos., 2017, 84, 188.

[31] Jeon D, Jun YB, Jeong Y, Oh JE. Microstructural and strength improvements through the use of Na₂CO₃ in a cementless Ca(OH)₂-activated Class F fly ash system. Cem. Concr. Res., 2015, 67, 215.

[32] Bernal SA, Provis JL, Myers RJ, San Nicolas R, van Deventer JSJ. Role of carbonates in the chemical evolution of sodium carbonate-activated slag binders. Mater. Struct., 2015, 48(3): 517.

[33] Fernández-Jiménez A, Puertas F. Setting of alkali-activated slag cement. Influence of activator nature. Adv. Cem. Res., 2001, 13(3): 115.

[34] Bischoff JL, Herbst DB, Rosenbauer RJ. Gaylussite formation at mono lake, California. Geochim. Cosmochim. Acta, 1991, 55(6): 1743.

[35] J. Xin, L. Liu, L.H. Xu, J.Y. Wang, P. Yang, and H.S. Qu, A preliminary study of aeolian sand-cement-modified gasification slag-paste backfill: Fluidity, microstructure, and leaching risks, Sci. Total. Environ., 830(2022), art. No. 154766.

[36] Sun Y, Zhao YL, Qiu JP, Zhang SY, Sun XG, Gu XW. Preparation and characterization of a new alkali-activated binder for superfine-tailings mine backfill. Environ. Sci. Pollut. Res. Int., 2022, 29(48): 73115.

[37] Myers RJ, L’Hôpital E, Provis JL, Lothenbach B. Effect of temperature and aluminium on calcium (alumino)silicate hydrate chemistry under equilibrium conditions. Cem. Concr. Res., 2015, 68, 83.

[38] Chaka AM, Felmy AR. Ab initio thermodynamic model for magnesium carbonates and hydrates. J. Phys. Chem. A, 2014, 118(35): 7469.

[39] Zhao YL, Wu PQ, Qiu JP, et al. Recycling hazardous steel slag after thermal treatment to produce a binder for cemented paste backfill. Powder Technol., 2022, 395, 652.

[40] Y. He, Q.S. Chen, C.C. Qi, Q.L. Zhang, and C.C. Xiao, Lithium slag and fly ash-based binder for cemented fine tailings backfill, J. Environ. Manage., 248(2019), art. No. 109282.

[41] Chen QS, Zhang QL, Fourie A, Xin C. Utilization of phosphogypsum and phosphate tailings for cemented paste backfill. J. Environ. Manage., 2017, 201, 19.

[42] Chen W, Li Y, Shen PL, Shui ZH. Microstructural development of hydrating Portland cement paste at early ages investigated with non-destructive methods and numerical simulation. J. Nondestruct. Eval., 2013, 32(3): 228.

[43] Lootens D, Jousset P, Martinie L, Roussel N, Flatt RJ. Yield stress during setting of cement pastes from penetration tests. Cem. Concr. Res., 2009, 39(5): 401.

[44] Bentz DP, Garboczi EJ, Haecker CJ, Jensen OM. Effects of cement particle size distribution on performance properties of Portland cement-based materials. Cem. Concr. Res., 1999, 29(10): 1663.

[45] Sato T, Beaudoin JJ. Effect of nano-CaCO₃ on hydration of cement containing supplementary cementitious materials. Adv. Cem. Res., 2011, 23(1): 33.

[46] Yum WS, Jeong Y, Song H, Oh JE. Recycling of limestone fines using Ca(OH)₂- and Ba(OH)₂-activated slag systems for eco-friendly concrete brick production. Constr. Build. Mater., 2018, 185, 275.

[47] Wu YY, Duan P, Yan CJ. Role of layered double hydroxides in setting, hydration degree, microstructure and compressive strength of cement paste. Appl. Clay Sci., 2018, 158, 123.

[48] Guo B, Liu B, Yang J, Zhang SG. The mechanisms of heavy metal immobilization by cementitious material treatments and thermal treatments: A review. J. Environ. Manage., 2017, 193, 410.

[49] S.Y. Zhang, Y.L. Zhao, Z.B. Guo, and H.X. Ding, Stabilization/solidification of hexavalent chromium containing tailings using low-carbon binders for cemented paste backfill, J. Environ. Chem. Eng., 9(2021), No. 1, art. No. 104738.

[50] S. Fan, B. Cao, N. Deng, Y.D. Hu, and M. Li, Effects of ferrihydrite nanoparticle incorporation in cementitious materials on radioactive waste immobilization, J. Hazard. Mater., 379(2019), art. No. 120570.

[51] F.L. Long, C.G. Niu, N. Tang, et al., Highly efficient removal of hexavalent chromium from aqueous solution by calcined Mg/Al-layered double hydroxides/polyaniline composites, Chem. Eng. J., 404(2021), art. No. 127084.

[52] Chen SP, Sun XY, Luo X, Liang ZW. CO₂ adsorption on premodified Li/Al hydrotalcite impregnated with polyethylenimine. Ind. Eng. Chem. Res., 2019, 58(3): 1177.

[53] M. Daud, A. Hai, F. Banat, et al., A review on the recent advances, challenges and future aspect of layered double hydroxides (LDH) - Containing hybrids as promising adsorbents for dyes removal, J. Mol. Liq., 288(2019), art. No. 110989.

[54] Z.Q. Sun and A. Vollpracht, Leaching of monolithic geopolymer mortars, Cem. Concr. Res., 136(2020), art. No. 106161.

[55] W.J. Long, T.H. Ye, F. Xing, and K.H. Khayat, Decalcification effect on stabilization/solidification performance of Pb-containing geopolymers, Cem. Concr. Compos., 114(2020), art. No. 103803.