Recycling and utilization of coal gasification residues for fabricating Fe/C composites as novel microwave absorbents

Abstract

Under the background of a transformation of the global energy structure, coal gasification technology has a wide application prospect, but its by-product, the coal gasification residue (CGR), is still not being efficiently utilized for recycling. The CGR contains abundant carbon components, which could be applied to the microwave absorption field as the carbon matrix. In this study, Fe/CGR composites are fabricated via a two-step method, including the impregnation of Fe³⁺ and the reduction process. The influence of the different loading capacities of the Fe component on the morphology and electromagnetic properties is studied. Moreover, the loading content of Fe and the surface morphology of the Fe/CGR can be reasonably controlled by adjusting the concentration of the ferric nitrate solution. Meanwhile, Fe particles are evenly inserted on the CGR framework, which expands the Fe/CGR interfaces to enhance interfacial polarization, thus further improving the microwave-absorbing (MA) properties of composites. Particularly, as the Fe³⁺ concentration is 1.0 mol/L, the Fe/CGR composite exhibits outstanding performance. The reflection loss reaches −39.3 dB at 2.5 mm, and the absorption bandwidth covers 4.1 GHz at 1.5 mm. In this study, facile processability, resource recycling, appropriately matched impedance, and excellent MA performance are achieved. Finally, the Fe/CGR composites not only enhance the recycling of the CGR but also pioneer a new path for the synthesis of excellent absorbents.

Keywords

coal gasification residue / recycling utilization / composite / microwave absorption

References

[1] L.H. Wu, X. Liu, G.P. Wan, et al., Ni/CNTs and carbon coating engineering to synergistically optimize the interfacial behaviors of TiO₂ for thermal conductive microwave absorbers, Chem. Eng. J., 448(2022), art. No. 137600.

[2] Kuo HM, Hsui TF, Tuo YS, Yuan CL. Microwave adsorption of core-shell structured Sr(MnTi)_xFe_12−2xO₁₉/PANI composites. J. Mater. Sci., 2012, 47(5): 2264.

[3] C.X. Wang, B.B. Wang, X. Cao, et al., 3D flower-like Co-based oxide composites with excellent wideband electromagnetic microwave absorption, Composites Part B, 205(2021), art. No. 108529.

[4] Ma M, Zheng Q, Zhu YH, Li L, Cao MS. Confinedly implanting Fe₃O₄ nanoclusters on MoS₂ nanosheets to tailor electromagnetic properties for excellent multi-bands microwave absorption. J. Materiomics, 2022, 8(3): 577.

[5] Wu ZC, Jin C, Yang ZQ, Che RC. Integrating hierarchical interfacial polarization in yeast-derived Mo₂C/C nanoflower/microsphere nanoarchitecture for boosting microwave absorption performance. Carbon, 2022, 189, 530.

[6] Zhou MF, Xu XF, Wan GP, Mou PP, Teng SJ, Wang GZ. Rationally tailoring interface characteristics of ZnO/amorphous carbon/graphene for heat-conduction microwave absorbers. Nano Res., 2022, 15(10): 8677.

[7] Di XC, Wang Y, Lu Z, Cheng RR, Yang LQ, Wu XM. Heterostructure design of Ni/C/porous carbon nanosheet composite for enhancing the electromagnetic wave absorption. Carbon, 2021, 179, 566.

[8] Cheng RR, Wang Y, Di XC, et al. Construction of MOF-derived plum-like NiCo@C composite with enhanced multi-polarization for high-efficiency microwave absorption. J. Colloid Interface Sci., 2022, 609, 224.

[9] Geng HR, Zhang X, Xie WH, et al. Lightweight and broadband 2D MoS₂ nanosheets/3D carbon nanofibers hybrid aerogel for high-efficiency microwave absorption. J. Colloid Interface Sci., 2022, 609, 33.

[10] Chen XL, Wang W, Shi T, Wu GL, Lu Y. One pot green synthesis and EM wave absorption performance of MoS₂@nitrogen doped carbon hybrid decorated with ultrasmall cobalt ferrite nanoparticles. Carbon, 2020, 163, 202.

[11] P.B. Liu, Y. Wang, G.Z. Zhang, et al., Hierarchical engineering of double-shelled nanotubes toward hetero-interfaces induced polarization and microscale magnetic interaction, Adv. Funct. Mater., 32(2022), No. 33, art. No. 2202588.

[12] Y. Fan, J.Y. Wang, X.M. Zhang, et al., Coal-based carbon/FeCo magnetic composites with layered stripes as novel lightweight microwave absorber, Diam. Relat. Mater., 120(2021), art. No. 108685.

[13] B.C. Wang, Y. Zhang, Y. Yang, et al., Facile preparation of carbon nanosheet frameworks/magnetic nanohybrids with heterogeneous interface as an excellent microwave absorber, J. Alloys Compd., 838(2020), art. No. 155586.

[14] Shu RW, Wu Y, Li XH, Li NN, Shi JJ. Fabrication of bimetallic metal-organic frameworks derived cobalt iron alloy@carbon-carbon nanotubes composites as ultrathin and high-efficiency microwave absorbers. J. Colloid Interface Sci., 2022, 613, 477.

[15] Wang Y, Di XC, Lu Z, Cheng RR, Wu XM, Gao PH. Controllable heterogeneous interfaces of cobalt/carbon nanosheets/rGO composite derived from metal-organic frameworks for high-efficiency microwave attenuation. Carbon, 2022, 187, 404.

[16] Wu L, Mendoza-Garcia A, Li Q, Sun SH. Organic phase syntheses of magnetic nanoparticles and their applications. Chem. Rev., 2016, 116(18): 10473.

[17] S.Q. Gu, Z.Q. Xu, Y.G. Ren, Z.F. Chai, and Y.X. Zhang, Effect of lignite semi-coke on lignite microwave upgrade and its slurryability, Energy Sources Part A, 2019. DOI: https://doi.org/10.1080/15567036.2019.1673852

[18] P.Q. Wang, C.A. Wang, C.W. Wang, et al., Synergistic effects in rapid co-pyrolysis of semi-coke and coal at high temperature, Fuel, 282(2020), art. No. 118795.

[19] Zhu BS, Tian YM, Wang YK, et al. Synthesis and microwave absorption properties of Fe-loaded fly ash-based ceramic composites. ACS Appl. Electron. Mater., 2020, 2(10): 3307.

[20] B.S. Zhu, Y.Y. Li, Y.M. Tian, et al., Rational design of FeCo/C/FA by recycling of fly ash for electromagnetic pollution, Colloids Surf. A, 627(2021), art. No. 127127.

[21] Li GM, Mao LT, Zhu BS, et al. Novel ceramic-based microwave absorbents derived from gangue. J. Mater. Chem. C, 2020, 8(40): 14238.

[22] L. Wang, B. Wen, H.B. Yang, Y. Qiu, and N.R. He, Hierarchical nest-like structure of Co/Fe MOF derived CoFe@C composite as wide-bandwidth microwave absorber, Composites Part A, 135(2020), art. No. 105958.

[23] Yuan SF, Qu X, Zhang R, Bi JC. Effect of calcium additive on product yields in hydrogasification of nickel-loaded Chinese sub-bituminous coal. Fuel, 2015, 147, 133.

[24] Yuan SF, Zhang N, Qu X, Bi JC, Cao QE, Wang JL. Promoted catalysis of calcium on the hydrogasification reactivity of iron-loaded subbituminous coal. Fuel, 2017, 200, 153.

[25] Zhu DD, Cheng Y, Xue B, Jiang YS, Wei CD. Coal gasification fine slag as a low-cost adsorbent for adsorption and desorption of humic acid. Silicon, 2020, 12(7): 1547.

[26] Wagner NJ, Matjie RH, Slaghuis JH, van Heerden JHP. Characterization of unburned carbon present in coarse gasification ash. Fuel, 2008, 87(6): 683.

[27] Wang FY, Sun YQ, Li DR, et al. Microwave absorption properties of 3D cross-linked Fe/C porous nanofibers prepared by electrospinning. Carbon, 2018, 134, 264.

[28] Y. Yuan, S.C. Wei, Y. Liang, et al., Solvothermal assisted synthesis of CoFe₂O₄/CNTs nanocomposite and their enhanced microwave absorbing properties, J. Alloys Compd., 867(2021), art. No. 159040.

[29] Z.L. Zhang, Y.Y. Lv, X.Q. Chen, et al., Porous flower-like Ni/C composites derived from MOFs toward high-performance electromagnetic wave absorption, J. Magn. Magn. Mater., 487(2019), art. No. 165334.

[30] F. Mederos-Henry, J. Mahin, B.P. Pichon, et al., Highly efficient wideband microwave absorbers based on zero-valent Fe@γ−Fe₂O₃ and Fe/co/Ni carbon-protected alloy nanoparticles supported on reduced graphene oxide, Nanomaterials, 9(2019), No. 9, art. No. 1196.

[31] Du YC, Liu WW, Qiang R, et al. Shell thickness-dependent microwave absorption of core-shell Fe₃O₄@C composites. ACS Appl. Mater. Interfaces, 2014, 6(15): 12997.

[32] Deng LL, Zhang JB, Shu RW. Fabrication of three-dimensional nitrogen-doped reduced graphene oxide/tin oxide composite aerogels as high-performance electromagnetic wave absorbers. J. Colloid Interface Sci., 2021, 602, 282.

[33] Che R C, Peng LM, Duan XF, Chen Q, Liang XL. Microwave absorption enhancement and complex permittivity and permeability of Fe encapsulated within carbon nanotubes. Adv. Mater., 2004, 16(5): 401.

[34] Ning MQ, Li JB, Kuang BY, et al. One-step fabrication of N-doped CNTs encapsulating M nanoparticles (M = Fe, Co, Ni) for efficient microwave absorption. Appl. Surf. Sci., 2018, 447, 244.

[35] Wang F, Gu WH, Chen JB, et al. The point defect and electronic structure of K doped LaCo_0.9Fe_0.1O₃ perovskite with enhanced microwave absorbing ability. Nano Res., 2022, 15(4): 3720.

[36] Huang H, Gao Y, Fang CF, et al. Spray granulation of Fe and C nanoparticles and their impedance match for microwave absorption. J. Mater. Sci. Technol., 2018, 34(3): 496.

[37] Qiang R, Du YC, Zhao HT, et al. Metal organic framework-derived Fe/C nanocubes toward efficient microwave absorption. J. Mater. Chem. A, 2015, 3(25): 13426.

[38] G.H. He, Y.P. Duan, and H.F. Pang, Microwave absorption of crystalline Fe/MnO@C nanocapsules embedded in amorphous carbon, Nano-Micro Lett., 12(2020), No. 1, art. No. 57.

[39] Liu Y, Lai J, Shi JF. Effects of the deposition temperature on the microwave-absorption performance of Fe/CNT composites. New Carbon Mater., 2020, 35(4): 428.

[40] Feng YR, Guo X, Gong HY, Zhang YJ, Lin X. Enhanced electromagnetic microwave absorption of Fe/C/SiCN composite ceramics targeting in integrated structure and function. Ceram. Int., 2021, 47(3): 3842.

[41] Yang PG, Yu M, Fu J, Wang LR. Synthesis and microwave absorption properties of hierarchical Fe micro-sphere assembly by nano-plates. J. Alloys Compd., 2017, 721, 449.

[42] Zhang XF, Rao Y, Guo JJ, Qin GW. Multiple-phase carbon-coated FeSn₂/Sn nanocomposites for high-frequency microwave absorption. Carbon, 2016, 96, 972.

[43] B.S. Zhu, Y.M. Tian, Y.K. Wang, et al., Construction of Ni-loaded ceramic composites for efficient microwave absorption, Appl. Surf. Sci., 538(2021), art. No. 148018.

[44] Zhang DF, Xu FX, Lin J, Yang ZD, Zhang M. Electromagnetic characteristics and microwave absorption properties of carbon-encapsulated cobalt nanoparticles in 2–18-GHz frequency range. Carbon, 2014, 80, 103.

[45] F. Gao, Y.Y. Li, L.T. Mao, et al., Facile synthesis of Co/SC microwave absorbents by recycling coal hydrogasification residue, Mater. Lett., 308(2022), art. No. 131168.

[46] Liu DW, Du YC, Xu P, et al. Waxberry-like hierarchical Ni@C microspheres with high-performance microwave absorption. J. Mater. Chem. C, 2019, 7(17): 5037.

[47] Yan LL, Liu J, Zhao SC, et al. Coaxial multi-interface hollow Ni−Al₂O₃−ZnO nanowires tailored by atomic layer deposition for selective-frequency absorptions. Nano Res., 2017, 10(5): 1595.

[48] Wang F, Gu WH, Chen JB, et al. Improved electromagnetic dissipation of Fe doping LaCoO₃ toward broadband microwave absorption. J. Mater. Sci. Technol., 2022, 105, 92.

[49] Wang L, Wen B, Bai XY, Liu C, Yang HB. Facile and green approach to the synthesis of zeolitic imidazolate framework nanosheet-derived 2D Co/C composites for a lightweight and highly efficient microwave absorber. J. Colloid Interface Sci., 2019, 540, 30.

[50] X. Yan, X.X. Huang, B. Zhong, et al., Balancing interface polarization strategy for enhancing electromagnetic wave absorption of carbon materials, Chem. Eng. J., 391(2020), art. No. 123538.

[51] Sooklal K, Cullum BS, Angel SM, Murphy CJ. Photophysical properties of ZnS nanoclusters with spatially localized Mn²⁺. J. Phys. Chem., 1996, 100(11): 4551.

[52] Zhang RX, Wang L, Xu CY, et al. Vortex tuning magnetization configurations in porous Fe₃O₄ nanotube with wide microwave absorption frequency. Nano Res., 2022, 15(7): 6743.

[53] Pan GH, Zhu J, Ma SL, Sun GB, Yang XJ. Enhancing the electromagnetic performance of Co through the phase-controlled synthesis of hexagonal and cubic Co nanocrystals grown on graphene. ACS Appl. Mater. Interfaces, 2013, 5(23): 12716.

[54] Xie S, Guo XN, Jin GQ, Guo XY. Carbon coated Co-SiC nanocomposite with high-performance microwave absorption. Phys. Chem. Chem. Phys., 2013, 15(38): 16104.

[55] Huang Y, Ji JD, Chen Y, et al. Broadband microwave absorption of Fe₃O₄−BaTiO₃ composites enhanced by interfacial polarization and impedance matching. Composites Part B, 2019, 163, 598.

[56] Wu F, Li Q, Liu ZH, et al. Fabrication of binary MOF-derived hybrid nanoflowers via selective assembly and their microwave absorbing properties. Carbon, 2021, 182, 484.

[57] Wang YH, Han XJ, Xu P, et al. Synthesis of pomegranate-like Mo₂C@C nanospheres for highly efficient microwave absorption. Chem. Eng. J., 2019, 372, 312.

[58] Wang ZJ, Wu LN, Zhou JG, Jiang ZH, Shen BZ. Chemoselectivity-induced multiple interfaces in MWCNT/Fe₃O₄@ZnO heterotrimers for whole X-band microwave absorption. Nanoscale, 2014, 6(21): 12298.