Designing new low alloyed Mg—RE alloys with high strength and ductility via high-speed extrusion

Abstract

Two new low-alloyed Mg—2RE—0.8Mn—0.6Ca—0.5Zn (wt%, RE = Sm or Y) alloys are developed, which can be produced on an industrial scale via relatively high-speed extrusion. These two alloys are not only comparable to commercial AZ31 alloy in extrudability, but also have superior mechanical properties, especially in terms of yield strength (YS). The excellent extrudability is related to less coarse second-phase particles and high initial melting point of the two as-cast alloys. The high strength—ductility mainly comes from the formation of fine grains, nano-spaced submicron/nano precipitates, and weak texture. Moreover, it is worth noting that the YS of the two alloys can maintain above 160 MPa at elevated temperature of 250°C, significantly higher than that of AZ31 alloy (YS: 45 MPa). The Zn/Ca solute segregation at grain boundaries, the improved heat resistance of matrix due to addition of RE, and the high melting points of strengthening particles (Mn, MgZn₂, and Mg—Zn—RE/Mg—Zn—RE—Ca) are mainly responsible for the excellent high-temperature strength.

Keywords

magnesium alloys / high-speed extrusion / high strength / high ductility / solute segregation

References

[1] Zhang Z, Zhang JH, Wang J, et al. Toward the development of Mg alloys with simultaneously improved strength and ductility by refining grain size via the deformation process. Int. J. Miner. Metall. Mater., 2021, 28(1): 30.

[2] Zhang JH, Liu SJ, Wu RZ, Hou LG, Zhang ML. Recent developments in high-strength Mg—RE-based alloys: Focusing on Mg—Gd and Mg—Y systems. J. Magnes. Alloys, 2018, 6(3): 277.

[3] Qi MF, Wei LY, Xu YZ, et al. Effect of trace yttrium on the microstructure, mechanical property and corrosion behavior of homogenized Mg—2Zn—0.1Mn—0.3Ca—xY biological magnesium alloy. Int. J. Miner. Metall. Mater., 2022, 29(9): 1746.

[4] Scripta Mater., 2014, 84–85(1)

[5] J.S. Xie, J.H. Zhang, Z. Zhang, et al., New insights on the different corrosion mechanisms of Mg alloys with solute-enriched stacking faults or long period stacking ordered phase, Corros. Sci., 198(2022), art. No. 110163.

[6] Hong LX, Wang RX, Zhang XB. Effects of Nd on microstructure and mechanical properties of as-cast Mg—12Gd—2Zn—xNd—0.4Zr alloys with stacking faults. Int. J. Miner. Metall. Mater., 2022, 29(8): 1570.

[7] H. Wu and G.H. Fan, An overview of tailoring strain delocalization for strength—ductility synergy, Prog. Mater. Sci., 113(2020), art. No. 100675.

[8] Han J, Wang C, Song YM, Liu ZY, Sun JP, Zhao JY. Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling. Int. J. Miner. Metall. Mater., 2022, 29(8): 1551.

[9] Yang K, Pan HC, Du S, et al. Low-cost and high-strength Mg—Al—Ca—Zn—Mn wrought alloy with balanced ductility. Int. J. Miner. Metall. Mater., 2022, 29(7): 1396.

[10] Jiang MG, Xu C, Nakata T, Yan H, Chen RS, Kamado S. High-speed extrusion of dilute Mg—Zn—Ca—Mn alloys and its effect on microstructure, texture and mechanical properties. Mater. Sci. Eng. A, 2016, 678, 329.

[11] Yang HB, Chai YF, Jiang B, et al. Enhanced mechanical properties of Mg—3Al—1Zn alloy sheets through slope extrusion. Int. J. Miner. Metall. Mater., 2022, 29(7): 1343.

[12] Nakata T, Mezaki T, Ajima R, et al. High-speed extrusion of heat-treatable Mg—Al—Ca—Mn dilute alloy. Scripta Mater., 2015, 101, 28.

[13] Jiang MG, Xu C, Nakata T, Yan H, Chen RS, Kamado S. Rare earth texture and improved ductility in a Mg—Zn—Gd alloy after high-speed extrusion. Mater. Sci. Eng. A, 2016, 667, 233.

[14] Cheng WL, Wang M, Que ZP, et al. Microstructure and mechanical properties of high speed indirect-extruded Mg—5Sn—(1,2,4)Zn alloys. J. Central South Univ., 2013, 20(10): 2643.

[15] Meng FZ, Lv SH, Yang Q, et al. Multiplex intermetallic phases in a gravity die-cast Mg—6.0Zn—1.5Nd—0.5Zr (wt%) alloy. J. Magnes. Alloys, 2022, 10(1): 209.

[16] Park SH, Kim SH, Kim HS, Yoon J, You BS. Highspeed indirect extrusion of Mg—Sn—Al—Zn alloy and its influence on microstructure and mechanical properties. J. Alloys Compd., 2016, 667, 170.

[17] Zeng ZR, Zhu YM, Nie JF, Xu SW, Davies CHJ, Birbilis N. Effects of calcium on strength and microstructural evolution of extruded alloys based on Mg—3Al—1Zn—0.3Mn. Metall. Mater. Trans. A, 2019, 50(9): 4344.

[18] U.M. Chaudry, K. Hamad, and Y.G. Ko, Effect of calcium on the superplastic behavior of AZ31 magnesium alloy, Mater. Sci. Eng. A, 815(2021), art. No. 140874.

[19] Y.H. Luo, W.L. Cheng, H. Yu, et al., Tailoring the microstructural characteristics and enhancing creep properties of as-cast Mg—5Bi—5Sn alloy through Mn addition, J. Magnes. Alloys, 2022. https://doi.org/10.1016/jjma.2021.12.004

[20] Xie JS, Zhang JH, You ZH, et al. Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying. J. Magnes. Alloys, 2021, 9(1): 41.

[21] P. Peng, A.T. Tang, J. She, et al., Significant improvement in yield stress of Mg—Gd—Mn alloy by forming bimodal grain structure, Mater. Sci. Eng. A, 803(2021), art. No. 140569.

[22] S.C. Jin, J.W. Cha, S.H. Joo, and S.H. Park, Enhancing tensile strength and ductility of high-speed-extruded Mg—5Bi—2Al through trace Mn addition, Mater. Charact., 181(2021), art. No. 111500.

[23] Z. Zhang, J.H. Zhang, J.S. Xie, et al., Developing a low-alloyed fine-grained Mg alloy with high strength—ductility based on dislocation evolution and grain boundary segregation, Scripta Mater., 209(2022), art. No. 114414.

[24] T.T.T. Trang, J.H. Zhang, J.H. Kim, et al., Designing a magnesium alloy with high strength and high formability, Nat. Commun., 9(2018), art. No. 2522.

[25] Z. Zhang, J.H. Zhang, J.S. Xie, et al., Significantly enhanced grain boundary Zn and Ca co-segregation of dilute Mg alloy via trace Sm addition, Mater. Sci. Eng. A, 831(2022), art. No. 142259.

[26] Williams DB, Carter CB. Transmission Electron Microscopy: A Textbook for Materials Science, 2009, 2nd ed. New York, Springer

[27] P. Peng, J. She, A.T. Tang, et al., A strategy to regulate the microstructure and properties of Mg—2.0Zn—1.5Mn magnesium alloy by tracing the existence of Mn element, J. Alloys Compd., 890(2022), art. No. 161789.

[28] Pan HC, Qin GW, Huang YM, et al. Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength. Acta Mater., 2018, 149, 350.

[29] K. Zhang, Z.T. Shao, C.S. Daniel, et al., A comparative study of plastic deformation mechanisms in room-temperature and cryogenically deformed magnesium alloy AZ31, Mater. Sci. Eng. A, 807(2021), art. No. 140821.

[30] R. Ni, S.J. Ma, L.J. Long, et al., Effects of precipitate on the slip activity and plastic heterogeneity of Mg—11Y—5Gd—2Zn—0.5Zr (wt. %) during room temperature compression, Mater. Sci. Eng. A, 804(2021), art. No. 140738.

[31] Imandoust A, Barrett CD, Oppedal AL, Whittington WR, Paudel Y, Kadiri HE. Nucleation and preferential growth mechanism of recrystallization texture in high purity binary magnesium—rare earth alloys. Acta Mater., 2017, 138, 27.

[32] Koren Z, Rosenson H, Gutman EM, Unigovski YB, Eliezer A. Development of semisolid casting for AZ91 and AM50 magnesium alloys. J. Light Met., 2002, 2(2): 81.

[33] Hall EO. The deformation and ageing of mild steel: III discussion of results. Proc. Phys. Soc. Sect. B, 1951, 64(9): 747.

[34] Zhao J, Jiang B, Wang QS, et al. Effects of Li addition on microstructures and tensile properties of the extruded Mg—1Zn—xLi alloy. Int. J. Miner. Metall. Mater., 2022, 29(7): 1380.

[35] Nie JF. Precipitation and hardening in magnesium alloys. Metall. Mater. Trans. A, 2012, 43(11): 3891.

[36] R. Alizadeh, J.Y. Wang, and J. LLorca, Precipitate strengthening of pyramidal slip in Mg—Zn alloys, Mater. Sci. Eng. A, 804(2021), art. No. 140697.

[37] Kim B, Hong CH, Kim JC, et al. Factors affecting the grain refinement of extruded Mg—6Zn—0.5Zr alloy by Ca addition. Scripta Mater., 2020, 187, 24.

[38] Hu J, Shi YN, Sauvage X, Sha G, Lu K. Grain boundary stability governs hardening and softening in extremely fine nanograined metals. Science, 2017, 355(6331): 1292.

[39] M. Zha, H.M. Zhang, H.L. Jia, et al., Prominent role of multi-scale microstructural heterogeneities on superplastic deformation of a high solid solution Al—7Mg alloy, Int. J. Plast., 146(2021), art. No. 103108.

[40] Huang ZH, Wang LY, Zhou BJ, Fischer T, Yi SB, Zeng XQ. Observation of non-basal slip in Mg—Y by in situ three-dimensional X-ray diffraction. Scripta Mater., 2018, 143, 44.

[41] Wu ZX, Curtin WA. The origins of high hardening and low ductility in magnesium. Nature, 2015, 526(7571): 62.

[42] Zhang C, Wu L, Huang GS, Wang GG, Jiang B, Pan FS. Microstructure and corrosion properties of Mg—0.5Zn—0.2Ca—0.2Ce alloy with different processing conditions. Rare Met., 2021, 40(7): 1924.

[43] Qin PF, Yang Q, He YY, et al. Microstructure and mechanical properties of high-strength high-pressure die-cast Mg—4Al—3La—1Ca—0.3Mn alloy. Rare Met., 2021, 40(10): 2956.

[44] Cepeda-Jiménez CM, Molina-Aldareguia JM, Pérez-Prado MT. Effect of grain size on slip activity in pure magnesium polycrystals. Acta Mater., 2015, 84, 443.

[45] Zhang H, Wang HY, Wang JG, et al. The synergy effect of fine and coarse grains on enhanced ductility of bimodal-structured Mg alloys. J. Alloys Compd., 2019, 780, 312.

[46] Sci. Rep., 2015, 5(1) art. No. 17100