Tribological behaviors of graphene oxide partly substituted with nano-SiO₂ as lubricant additives in water for magnesium alloy/steel interfaces

Abstract

Although graphene oxide (GO) has emerged as an excellent lubricant additive in water, there remain great challenges in their practical application due to high production costs. By taking into account the low cost and also its excellent tribological properties, it is likely that nano-SiO₂ can be used as a lubricant additive to partially replace GO. Hence, this paper aims to explore the tribological properties of nano-SiO₂ incorporated in GO nanofluids for partial GO replacement by investigating the friction coefficient and wear volume of the prepared SiO₂/GO hybrid nanofluids for magnesium alloy/steel sliding pairs. The experiments reveal that the SiO₂/GO hybrids retain low friction coefficients as compared to individual GO or SiO₂ at all test conditions in this study. However, as for the bearing capacity test, all samples can provide a low wear volume under the loads of 1 and 3 N. With the increase of the normal load, there is considerable differences in the anti-wear behavior. Compared with that of individual GO nanofluids, the wear volume of the GO/SiO₂ (mass ratio of 0.3:0.2) hybrid nanofluids was reduced by 50.5% at 5 N and by 49.2% at 8 N. Furthermore, the wear volume of the GO/SiO₂ (mass ratio of 0.3:0.2) hybrid nanofluids was reduced by 46.3% under the rigorous conditions, as compared to individual GO nanofluids. The findings provide new insights into developing carbon nanomaterial-based hybrid nanofluids for magnesium alloy formation.

Keywords

magnesium alloy / graphene oxide and nano-silicon dioxide / water-based lubricant additive / tribological characteristics

References

[1] Nandy S, Tsai SP, Stephenson L, Raabe D, Zaefferer S. The role of Ca, Al and Zn on room temperature ductility and grain boundary cohesion of magnesium. J. Magnes. Alloys, 2021, 9(5): 1521.

[2] Zhang HF, Zhou L, Li WL, Li GH, Tang YT, Guo N, Feng JC. Effect of tool plunge depth on the microstructure and fracture behavior of refill friction stir spot welded AZ91 magnesium alloy joints. Int. J. Miner. Metall. Mater., 2021, 28(4): 699.

[3] Wang J, Li T, Li HX, Ma YZ, Zhao KN, Yang CL, Zhang JS. Effect of trace Ni addition on microstructure, mechanical and corrosion properties of the extruded Mg-Gd-Y-Zr-Ni alloys for dissoluble fracturing tools. J. Magnes. Alloys, 2021, 9(5): 1632.

[4] B. Ravaji and S.P. Joshi, A crystal plasticity investigation of grain size—texture interaction in magnesium alloys, Acta Mater., 208(2021), art. No. 116743.

[5] Samadpour F, Faraji G, Siahsarani A. Processing of AM60 magnesium alloy by hydrostatic cyclic expansion extrusion at elevated temperature as a new severe plastic deformation method. Int. J. Miner. Metall. Mater., 2020, 27(5): 669.

[6] Yadav VS, Sankar MR, Pandey LM. Coating of bioactive glass on magnesium alloys to improve its degradation behavior: Interfacial aspects. J. Magnes. Alloys, 2020, 8(4): 999.

[7] Cheng Z, Wang SZ, Wu GL, Gao JH, Yang XS, Wu HH. Tribological properties of high-entropy alloys: A review. Int. J. Miner. Metall. Mater., 2022, 29(3): 389.

[8] Movahedi H, Jamshidi S, Hajipour M. New insight into the filtration control of drilling fluids using a graphene-based nanocomposite under static and dynamic conditions. ACS Sustainable Chem. Eng., 2021, 9(38): 12844.

[9] R.B. Qiang, L.F. Hu, K.M. Hou, J.Q. Wang, and S.R. Yang, Water-soluble graphene quantum dots as high-performance water-based lubricant additive for steel/steel contact, Tribol. Lett., 67(2019), No. 2, art. No. 64.

[10] Tang JZ, Chen SQ, Jia YL, Ma Y, Xie HM, Quan X, Ding Q. Carbon dots as an additive for improving performance in water-based lubricants for amorphous carbon (a-C) coatings. Carbon, 2020, 156, 272.

[11] Li MC, Wu QL, Song KL, Qing Y, Wu YQ. Cellulose nanoparticles as modifiers for rheology and fluid loss in bentonite water-based fluids. ACS. Appl. Mater. Interfaces, 2015, 7(8): 5006.

[12] Alazemi AA, Dysart AD, Phuah XL, Pol VG, Sadeghi F. MoS₂ nanolayer coated carbon spheres as an oil additive for enhanced tribological performance. Carbon, 2016, 110, 367.

[13] Wang YX, Du YY, Deng JA, Wang ZP. Friction reduction of water based lubricant with highly dispersed functional MoS₂ nanosheets. Colloids Surf. A, 2019, 562, 321.

[14] Shahnazar S, Bagheri S, Hamid SBA. Enhancing lubricant properties by nanoparticle additives. Int. J. Hydrogen Energy, 2016, 41(4): 3153.

[15] Guo WL, Yin J, Qiu H, Guo YF, Wu HR, Xue MM. Friction of low-dimensional nanomaterial systems. Friction, 2014, 2(3): 209.

[16] Song HJ, Li N. Frictional behavior of oxide graphene nanosheets as water-base lubricant additive. Appl. Phys. A, 2011, 105(4): 827.

[17] Kinoshita H, Nishina Y, Alias AA, Fujii M. Tribological properties of monolayer graphene oxide sheets as water-based lubricant additives. Carbon, 2014, 66, 720.

[18] H.M. Xie, B. Jiang, J.H. Dai, C. Peng, C.X. Li, Q. Li, and F.S. Pan, Tribological behaviors of graphene and graphene oxide as water-based lubricant additives for magnesium alloy/steel contacts, Materials, 11(2018), No. 2, art. No. 206.

[19] T. Lv, X.F. Xu, A.B. Yu, and X.D. Hu, Oil mist concentration and machining characteristics of SiO₂ water-based nano-lubricants in electrostatic minimum quantity lubrication-EMQL milling, J. Mater. Process. Technol., 290(2021), art. No. 116964.

[20] Sia SY, Bassyony EZ, Sarhan AAD. Development of SiO₂ nanolubrication system to be used in sliding bearings. Int. J. Adv. Manuf. Technol., 2014, 71(5–8): 1277.

[21] Sayuti M, Sarhan AAD, Salem F. Novel uses of SiO₂ nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption. J. Cleaner Prod., 2014, 67, 265.

[22] Xie HM, Jiang B, Wang QH, Xia XS, Pan FS. Effects of combined additions of SiO₂ and MoS₂ nanoparticles as lubricant additive on the tribological properties of AZ31 magnesium alloy. Sci. China Technol. Sci., 2016, 59(5): 689.

[23] Sayuti M, Sarhan AAD, Hamdi M. An investigation of optimum SiO₂ nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. Int. J. Adv. Manuf. Technol., 2013, 67(1–4): 833.

[24] Jia XH, Huang J, Li Y, Yang J, Song HJ. Monodisperse Cu nanoparticles @ MoS₂ nanosheets as a lubricant additive for improved tribological properties. Appl. Surf. Sci., 2019, 494, 430.

[25] Wu P, Chen XC, Zhang CH, Luo JB. Synergistic tribological behaviors of graphene oxide and nanodiamond as lubricating additives in water. Tribol. Int., 2019, 132, 177.

[26] Li X, Chen Y, Mo SP, Jia LS, Shao XF. Effect of surface modification on the stability and thermal conductivity of water-based SiO₂-coated graphene nanofluid. Thermochim. Acta, 2014, 595, 6.

[27] Berman D, Erdemir A, Zinovev AV, Sumant AV. Nanoscale friction properties of graphene and graphene oxide. Diamond Relat. Mater., 2015, 54, 91.

[28] Bhowmick S, Banerji A, Alpas AT. Role of humidity in reducing sliding friction of multilayered graphene. Carbon, 2015, 87, 374.

[29] Li XH, Cao Z, Zhang ZJ, Dang HX. Surface-modification in situ of nano-SiO₂ and its structure and tribological properties. Appl. Surf. Sci., 2006, 252(22): 7856.

[30] Samanta S, Sahoo RR. Covalently linked hexagonal boron nitride—graphene oxide nanocomposites as high-performance oil-dispersible lubricant additives. ACS Appl. Nano Mater., 2020, 3(11): 10941.

[31] Ge XY, Li JJ, Luo R, Zhang CH, Luo JB. Macroscale superlubricity enabled by the synergy effect of graphene-oxide nanoflakes and ethanediol. ACS Appl. Mater. Interfaces, 2018, 10(47): 40863.

[32] Mosleh M, Atnafu ND, Belk JH, Nobles OM. Modification of sheet metal forming fluids with dispersed nanoparticles for improved lubrication. Wear, 2009, 267(5–8): 1220.

[33] X. Han, S.J. Thrush, Z.P. Zhang, G.C. Barber, and H.W. Qu, Tribological characterization of ZnO nanofluids as fastener lubricants, Wear, 468–469(2021), art. No. 203592.