Growth kinetics and mechanism of microarc oxidation coating on Ti−6Al−4V alloy in phosphate/silicate electrolyte

Abstract

Microarc oxidation (MAO) is an effective surface treatment method for Ti alloys to allow their application in extreme environments. Here, binary electrolytes consisting of different amounts of sodium phosphate and sodium silicate were designed for MAO. The surface morphology, composition, and properties of MAO coatings on Ti−6Al−4V alloy treated in 0.10 mol/L electrolyte were investigated to reveal the effect of PO₄ ³⁻ and SiO₃ ²⁻ on the growth kinetics of the MAO coatings, using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and potentiodynamic polarization. The results showed that PO₄ ³⁻ is beneficial for generating microarcs and forming pores within the coating, resulting in a thick but porous coating. SiO₃ ²⁻ facilitates the blocking of pores in the outer deposition layer and impedes the generation of microarcs, resulting in a thin dense coating. The thickness, density, phases content, and polarization resistance of the MAO coatings are primarily affected by the intensity of microarcs for low SiO₃ ²⁻ contents, and by the number of microarcs when the SiO₃ ²⁻ content is sufficiently high. The thickness of MAO coatings obtained in P/Si electrolytes shows a piecewise linear increase with increasing process time during the three stages of microarc discharge. SiO₃ ²⁻ is beneficial to the density increase of the coating formed in the previous stage of microarcs discharge, but slows down the growth of the coating formed in the next stage.

Keywords

microarc oxidation / titanium alloy / phosphate / silicate / growth kinetics / growth mechanism

References

[1] Zhou L, Liu S, Min J, et al. Interface microstructure and formation mechanism of ultrasonic spot welding for Al−Ti dissimilar metals. Int. J. Miner. Metall. Mater., 2021, 28(9): 1506.

[2] Laketić S, Rakin M, Momčilović M, Ciganović J, Veljović D, Cvijović-Alagić I. Surface modifications of biometallic commercially pure Ti and Ti−13Nb−13Zr alloy by picosecond Nd: YAG laser. Int. J. Miner. Metall. Mater., 2021, 28(2): 285.

[3] Wang D, Pang S, Zhou CY, Peng Y, Wang Z, Gong XZ. Improve titanate reduction by electro-deoxidation of Ca₃Ti₂O₇ precursor in molten CaCl₂. Int. J. Miner. Metall. Mater., 2020, 27(12): 1618.

[4] C. Yang, S.H. Cui, Z.C. Wu, J.Y. Zhu, J. Huang, Z.Y. Ma, R.K.Y. Fu, X.B. Tian, P.K. Chu, and Z.Z. Wu, High efficient co-doping in plasma electrolytic oxidation to obtain long-term self-lubrication on Ti−6Al−4V, Tribol. Int., 160(2021), art. No. 107018.

[5] K. Rokosz, T. Hryniewicz, and Ł. Dudek, Phosphate porous coatings enriched with selected elements via PEO treatment on titanium and its alloys: A review, Materials (Basel), 13(2020), No. 11, art. No. 2468.

[6] B. Hamrahi, B. Yarmand, and A. Massoudi, Improved in-vitro corrosion performance of titanium using a duplex system of plasma electrolytic oxidation and graphene oxide incorporated silane coatings, Surf. Coat. Technol., 422(2021), art. No. 127558.

[7] S.W. Guan, M. Qi, C. Wang, S.Y. Wang, and W.Q. Wang, Enhanced cytocompatibility of Ti−6Al−4V alloy through selective removal of Al and V from the hierarchical micro-arc oxidation coating, Appl. Surf. Sci., 541(2021), art. No. 148547.

[8] Shokouhfar M, Dehghanian C, Montazeri M, Baradaran A. Preparation of ceramic coating on Ti substrate by plasma electrolytic oxidation in different electrolytes and evaluation of its corrosion resistance: Part II. Appl. Surf. Sci., 2012, 258(7): 2416.

[9] M. Kaseem, S. Fatimah, N. Nashrah, and Y.G. Ko, Recent progress in surface modification of metals coated by plasma electrolytic oxidation: Principle, structure, and performance, Prog. Mater. Sci., 117(2021), art. No. 100735.

[10] Mécuson F, Czerwiec T, Belmonte T, Dujardin L, Viola A, Henrion G. Diagnostics of an electrolytic microarc process for aluminium alloy oxidation. Surf. Coat. Technol., 2005, 200(1–4): 804.

[11] Maryam M, Kazem B, Fattah-alhosseini A. Improving the wear resistance of plasma electrolytic oxidation (PEO) coatings applied on Mg and its alloys under the addition of nano- and micro-sized additives into the electrolytes: A review. J. Magnes. Alloys, 2021, 9(4): 1164.

[12] Stojadinović S, Vasilić R, Radić-Perić J, Perić M. Characterization of plasma electrolytic oxidation of magnesium alloy AZ31 in alkaline solution containing fluoride. Surf. Coat. Technol., 2015, 273, 1.

[13] Laveissière M, Cerda H, Roche J, Cassayre L, Arurault L. In-depth study of the influence of electrolyte composition on coatings prepared by plasma electrolytic oxidation of TA6V alloy. Surf. Coat. Technol., 2019, 361, 50.

[14] Han JX, Cheng YL, Tu WB, Zhan TY, Cheng YL. The black and white coatings on Ti−6Al−4V alloy or pure titanium by plasma electrolytic oxidation in concentrated silicate electrolyte. Appl. Surf. Sci., 2018, 428, 684.

[15] Li QB, Yang WB, Liu CC, Wang DA, Liang J. Correlations between the growth mechanism and properties of micro-arc oxidation coatings on titanium alloy: Effects of electrolytes. Surf. Coat. Technol., 2017, 316, 162.

[16] Aliasghari S, Skeldon P, Thompson GE. Plasma electrolytic oxidation of titanium in a phosphate/silicate electrolyte and tribological performance of the coatings. Appl. Surf. Sci., 2014, 316, 463.

[17] Cheng YL, Wu XQ, Xue ZG, Matykina E, Skeldon P, Thompson GE. Microstructure, corrosion and wear performance of plasma electrolytic oxidation coatings formed on Ti−6Al−4V alloy in silicate-hexametaphosphate electrolyte. Surf. Coat. Technol., 2013, 217, 129.

[18] N. Ao, D.X. Liu, X.H. Zhang, and G.Y. He, Microstructural characteristics of PEO coating: Effect of surface nanocrystallization, J. Alloys Compd., 823(2020), art. No. 153823.

[19] Mortazavi G, Jiang JC, Meletis EI. Investigation of the plasma electrolytic oxidation mechanism of titanium. Appl. Surf. Sci., 2019, 488, 370.

[20] S.W. Guan, M. Qi, Y.D. Li, and W.Q. Wang, Morphology evolution of the porous coatings on Ti−xAl alloys by Al adding into Ti during micro-arc oxidation in Na₂B₄O₇ electrolyte, Surf. Coat. Technol., 395(2020), art. No. 125948.

[21] X.X. Zhang, G. Cai, Y. Lv, Y.L. Wu, and Z.H. Dong, Growth mechanism of titania on titanium substrate during the early stage of plasma electrolytic oxidation, Surf. Coat. Technol., 400(2020), art. No. 126202.

[22] Ao N, Liu DX, Wang SX, Zhao Q, Zhang XH, Zhang MM. Microstructure and tribological behavior of a TiO₂/hBN composite ceramic coating formed via micro-arc oxidation of Ti-6Al-4V alloy. J. Mater. Sci. Technol., 2016, 32(10): 1071.

[23] S.A. Salehizadeh, I. Carvalho, R. Serra, S. Calderon V, P.J. Ferreira, A. Cavaleiro, and S. Carvalho, Role of Au incorporation in the electrochemical behavior of Ag/a:C nanocomposite coatings, Surf. Coat. Technol., 401(2020), art. No. 126240.

[24] A. Bordbar-Khiabani, S. Ebrahimi, and B. Yarmand, In-vitro corrosion and bioactivity behavior of tailored calcium phosphate-containing zinc oxide coating prepared by plasma electrolytic oxidation, Corros. Sci., 173(2020), art. No. 108781.

[25] Lederer S, Sankaran S, Smith T, Fürbeth W. Formation of bioactive hydroxyapatite-containing titania coatings on CP-Ti 4+ alloy generated by plasma electrolytic oxidation. Surf. Coat. Technol., 2019, 363, 66.

[26] Wang YM, Jiang BL, Lei TQ, Guo LX. Microarc oxidation and spraying graphite duplex coating formed on titanium alloy for antifriction purpose. Appl. Surf. Sci., 2005, 246(1–3): 214.

[27] Lugovskoy A, Lugovskoy S. Production of hydroxyapatite layers on the plasma electrolytically oxidized surface of titanium alloys. Mater. Sci. Eng. C, 2014, 43, 527.

[28] L.J. Chen and R.K.L. Su, Corrosion rate measurement by using polarization resistance method for microcell and macrocell corrosion: Theoretical analysis and experimental work with simulated concrete pore solution, Constr. Build. Mater., 267(2021), art. No. 121003.

[29] Chang LM. Growth regularity of ceramic coating on magnesium alloy by plasma electrolytic oxidation. J. Alloys Compd., 2009, 468(1–2): 462.

[30] Matykina E, Arrabal R, Monfort F, Skeldon P, Thompson GE. Incorporation of zirconia into coatings formed by DC plasma electrolytic oxidation of aluminium in nanoparticle suspensions. Appl. Surf. Sci., 2008, 255(5): 2830.

[31] Ko YG, Namgung S, Shin DH. Correlation between KOH concentration and surface properties of AZ91 magnesium alloy coated by plasma electrolytic oxidation. Surf. Coat. Technol., 2010, 205(7): 2525.

[32] Wang DD, Liu XT, Wu YK, Han HP, Yang Z, Su Y, Zhang XZ, Wu GR, Shen DJ. Evolution process of the plasma electrolytic oxidation (PEO) coating formed on aluminum in an alkaline sodium hexametaphosphate ((NaPO₃)₆) electrolyte. J. Alloys Compd., 2019, 798, 129.