Enhanced sulfidization of azurite surfaces by ammonium phosphate and its effect on flotation

Abstract

Although azurite is one of the most important copper oxide minerals, the recovery of this mineral via sulfidization-xanthate flotation is typically unsatisfactory. The present work demonstrated the enhanced sulfidization of azurite surfaces using ammonia phosphate ((NH₄)₃PO₄) together with Na₂S, based on micro-flotation experiments, time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS), zeta-potential measurements, contact angle measurements, Fourier-transform infrared (FT-IR) spectroscopy, and ultraviolet-visible (UV-Vis) spectroscopy. Micro-flotation experiments showed that the floatability of azurite was increased following the simultaneous addition of (NH₄)₃PO₄ and Na₂S. ToF-SIMS and XPS analyses demonstrated the formation of a high content of S species on the azurite surface and an increase in the number of Cu(I) species after exposure to (NH₄)₃PO₄ and Na₂S, compared with the azurite-Na₂S system. The zeta potential of azurite particles was negatively shifted and the contact angle on the azurite surface was increased with the addition of (NH₄)₃PO₄ prior to Na₂S. These results indicate that treatment with (NH₄)₃PO₄ enhances the sulfidization of azurite surfaces, which in turn promotes xanthate attachment. FT-IR and UV-Vis analyses confirmed that the addition of (NH₄)₃PO₄ increased the adsorption of xanthate with reducing the consumption of xanthate during the azurite flotation process. Thus, (NH₄)₃PO₄ has a beneficial effect on the sulfidization flotation of azurite.

Keywords

azurite / ammonium phosphate / enhanced sulfidization / reagent adsorption / flotation enhancement

References

[1] Yin SH, Chen W, Fan XL, Liu JM, Wu LB. Review and prospects of bioleaching in the Chinese mining industry. Int. J. Miner. Metall. Mater., 2021, 28(9): 1397.

[2] Moustafa EB, Taha MA. Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloying. Int. J. Miner. Metall. Mater., 2021, 28(3): 475.

[3] H.Y. Xie, Y.H. Liu, B. Rao, J.Z. Wu, L.K. Gao, L.Z. Chen, and X.S. Tian, Selective passivation behavior of galena surface by sulfuric acid and a novel flotation separation method for copper-lead sulfide ore without collector and inhibitor, Sep. Purif. Technol., 267(2021), art. No. 118621.

[4] Tijsseling LT, Dehaine Q, Rollinson GK, Glass HJ. Flotation of mixed oxide sulphide copper-cobalt minerals using xanthate, dithiophosphate, thiocarbamate and blended collectors. Miner. Eng., 2019, 138, 246.

[5] Zhang XL, Kou J, Sun CB, Zhang RY, Su M, Li SF. Mineralogical characterization of copper sulfide tailings using automated mineral liberation analysis: A case study of the Chambishi Copper Mine tailings. Int. J. Miner. Metall. Mater, 2021, 28(6): 944.

[6] Wang GR, Yang HY, Liu YY, Tong LL, Auwalu A. Study on the mechanical activation of malachite and the leaching of complex copper ore in the Luanshya mining area, Zambia. Int. J. Miner. Metall. Mater., 2020, 27(3): 292.

[7] Yin WZ, Tang Y. Interactive effect of minerals on complex ore flotation: A brief review. Int. J. Miner. Metall. Mater, 2020, 27(5): 571.

[8] Han G, Wen SM, Wang H, Feng QC. Sulfidization regulation of cuprite by pre-oxidation using sodium hypochlorite as an oxidant. Int. J. Min. Sci. Techno., 2021, 31(6): 1117.

[9] J.P. Cai, D.W. Liu, P.L. Shen, X.L. Zhang, K.W. Song, X.D. Jia, and C. Su, Effects of heating-sulfidation on the formation of zinc sulfide species on smithsonite surfaces and its response to flotation, Miner. Eng., 169(2021), art. No. 106956.

[10] J.L. Li, S.Y. Liu, D.W. Liu, R.Z. Liu, Z.C. Liu, X.D. Jia, and T.C. Chang, Sulfidization mechanism in the flotation of cerussite: A heterogeneous solid-liquid reaction that yields PbCO₃/PbS core-shell particles, Miner. Eng., 153(2020), art. No. 106400.

[11] Liu C, Zhu GL, Song SX, Li HQ. Interaction of gangue minerals with malachite and implications for the sulfidization flotation of malachite. Colloids Surf. A, 2018, 555, 679.

[12] Li Z, Chen M, Huang PW, Zhang QW, Song SX. Effect of grinding with sulfur on surface properties and floatability of three nonferrous metal oxides. Trans. Nonferrous Met. Soc. China, 2017, 27(11): 2474.

[13] Min XB, Yuan CY, Liang YJ, Chai LY, Ke Y. Metal recovery from sludge through the combination of hydrothermal sulfidation and flotation. Procedia Environ. Sci, 2012, 16, 401.

[14] Wu DD, Mao YB, Deng JS, Wen SM. Activation mechanism of ammonium ions on sulfidation of malachite (-201) surface by DFT study. Appl. Surf. Sci., 2017, 410, 126.

[15] D.Q. Xing, Y.Q. Huang, C.S. Lin, W.R. Zuo, and R.D. Deng, Strengthening of sulfidization flotation of hemimorphite via fluorine ion modification, Sep. Purif. Technol., 269(2021), art. No. 118769.

[16] R.Z. Liu, D.W. Liu, J.L. Li, S.Y. Liu, Z.C. Liu, L.Q. Gao, X.D. Jia, and S.F. Ao, Improved understanding of the sulfidization mechanism in cerussite flotation: An XPS, ToF-SIMS and FESEM investigation, Colloids Surf. A, 595(2020), art. No. 124508.

[17] Feng QC, Zhao WJ, Wen SM, Cao QB. Copper sulfide species formed on malachite surfaces in relation to flotation. J. Ind. Eng. Chem., 2017, 48, 125.

[18] Z.Y. Lan, Z.N. Lai, Y.X. Zheng, J.F. Lv, J. Pang, and J.L. Ning, Thermochemical modification for the surface of smithsonite with sulfur and its flotation response, Miner. Eng., 150(2020), art. No. 106271.

[19] Feng QC, Zhao WJ, Wen SM. Ammonia modification for enhancing adsorption of sulfide species onto malachite surfaces and implications for flotation. J. Alloys Compd., 2018, 744, 301.

[20] P.L. Shen, D.W. Liu, X.H. Xu, X.D. Jia, X.L. Zhang, K.W. Song, and J.P. Cai, Effects of ammonium phosphate on the formation of crystal copper sulfide on chrysocolla surfaces and its response to flotation, Miner. Eng., 155(2020), art. No. 106300.

[21] Bai SJ, Li CL, Fu XY, Ding Z, Wen SM. Promoting sulfidation of smithsonite by zinc sulfide species increase with addition of ammonium chloride and its effect on flotation performance. Miner. Eng., 2018, 125, 190.

[22] X. Bai, J. Liu, S.M. Wen, Y. Wang, and Y.L. Lin, Effect of ammonium salt on the stability of surface sulfide layer of smithsonite and its flotation performance, Appl. Surf. Sci., 514(2020), art. No. 145851.

[23] Shen PL, Liu DW, Zhang XL, Jia XD, Song KW. and D. Liu, Effect of (NH₄)₂SO₄ on eliminating the depression of excess sulfide ions in the sulfidization flotation of malachite. Miner. Eng., 2019, 137, 43.

[24] Feng QC, Zhao WJ, Wen SM. Surface modification of malachite with ethanediamine and its effect on sulfidization flotation. Appl. Surf. Sci., 2018, 436, 823.

[25] Q. Zhang, Y.J. Wang, Q.C. Feng, S.M. Wen, Y.W. Zhou, W.L. Nie, and J.B. Liu, Identification of sulfidization products formed on azurite surfaces and its correlations with xanthate adsorption and flotation, Appl. Surf. Sci., 511(2020), art. No. 145594.

[26] Q. Zhang, S.M. Wen, Q.C. Feng, and S. Zhang, Surface characterization of azurite modified with sodium sulfide and its response to flotation mechanism, Sep. Purif. Technol., 242(2020), art. No. 116760.

[27] Q.Y. Sheng, W.Z. Yin, B. Yang, S.H. Cao, H.R. Sun, Y.Q. Ma, and K.Q. Chen, Improving surface sulfidization of azurite with ammonium bisulfate and its contribution to sulfidization flotation, Miner. Eng., 171(2021), art. No. 107072.

[28] M. Finšgar, Surface analysis by gas cluster ion beam XPS and ToF-SIMS tandem MS of 2-mercaptobenzoxazole corrosion inhibitor for brass, Corros. Sci., 182(2021), art. No. 109269.

[29] H. Lai, J.S. Deng, Q.J. Liu, S.M. Wen, and Q. Song, Surface chemistry investigation of froth flotation products of lead-zinc sulfide ore using ToF-SIMS and multivariate analysis, Sep. Purif. Technol}, 254(2021), art. No. 117655.

[30] H. Lai, Q.J. Liu, J.S. Deng, S.M. Wen, and Z.L. Liu, Surface chemistry study of Cu-Pb sulfide ore using ToF-SIMS and multivariate analysis, Appl. Surf. Sci., 518(2020), art. No. 146270.

[31] S.J. Bai, P. Yu, Z. Ding, Y.X. Bi, C.L. Li, D.D. Wu, and S.M. Wen, New insights into lead ions activation for microfine particle ilmenite flotation in sulfuric acid system: Visual MINTEQ models, XPS, and ToF-SIMS studies, Miner. Eng., 155(2020), art. No. 106473.

[32] V.S.G. Krishna and M.G. Mahesha, XPS analysis of ZnS_0.4Se_0.6 thin films deposited by spray pyrolysis technique, J. Electron Spectrosc. Relat. Phenom., 249(2021), art. No. 147072.

[33] B.V. Crist, The XPS library website: A resource for the XPS community including - The XPS library of information, XPS spectra-base having >70,000 monochromatic XPS spectra, and spectral data processor (SDP) v8.0 software, J. Electron Spectrosc. Relat. Phenom., 248(2021), art. No. 147046.

[34] Y. Kubo, Y. Sonohara, and S. Uemura, Changes in the chemical state of metallic Cr during deposition on a polyimide substrate: Full soft XPS and ToF-SIMS depth profiles, Appl. Surf. Sci., 553(2021), art. No. 149437.

[35] G. Han, S.M. Wen, H. Wang, and Q.C. Feng, Surface sulfidization mechanism of cuprite and its response to xanthate adsorption and flotation performance, Miner. Eng., 169(2021), art. No. 106982.

[36] Peng HQ, Wu D, Abdelmonem M. Flotation performances and surface properties of chalcopyrite with xanthate collector added before and after grinding. Results Phys., 2017, 7, 3567.

[37] G. Han, S.M. Wen, H. Wang, and Q.C. Feng, Effect of ferric ion on cuprite surface properties and sulfidization flotation, Sep. Purif. Technol., 278(2021), art. No. 119573.

[38] Li CL, Bai SJ, Ding Z, Yu P, Wen SM. Visual MINTEQ model, ToF-SIMS, and XPS study of smithsonite surface sulfidation behavior: Zinc sulfide precipitation adsorption. J. Taiwan Inst. Chem. Eng., 2019, 96, 53.

[39] Luo JJ, Niu Q, Jin MC, Cao YN, Ye LR, Du RP. Study on the effects of oxygen-containing functional groups on Hg⁰ adsorption in simulated flue gas by XAFS and XPS analysis. J. Hazard. Mater., 2019, 376, 21.

[40] S. Krainer and U. Hirn, Contact angle measurement on porous substrates: Effect of liquid absorption and drop size, Colloids Surf. A, 619(2021), art. No. 126503.

[41] G. Huminic, A. Huminic, F. Dumitrache, C. Fleaca, and I. Morjan, Experimental study on contact angle of water based Si-C nanofluid, J. Mol. Liq., 332(2021), art. No. 115833.

[42] Y.J. Yang, L.Y. Zhang, Y.L. Zhu, G.T. Wei, Z.M. Li, and R.L. Mo, Three-dimensional photoelectrocatalytic degradation of ethyl xanthate catalyzed by activated bentonite-based bismuth ferrites particle electrodes: Influencing factors, kinetics, and mechanism, J. Environ. Chem. Eng., 9(2021), No. 4, art. No. 105559.

[43] Zhu GC, Liu JF, Yin J, Li ZW, Ren BZ, Sun YJ, Wan P, Liu YS. Functionalized polyacrylamide by xanthate for Cr(VI) removal from aqueous solution. Chem. Eng. J., 2016, 288, 390.

[44] Li ZL, Kong Y, Ge YY. Synthesis of porous lignin xanthate resin for Pb²⁺ removal from aqueous solution. Chem. Eng. J., 2015, 270, 229.