Compressive fatigue behavior and failure evolution of additive fiber-reinforced cemented tailings composites

Abstract

The ordinary cemented tailings backfill (CTB) is a cement-based composite prepared from tailings, cementitious materials, and water. In this study, a series of laboratory tests, including uniaxial compression, digital image correlation measurement, and scanning electron microscope characteristics of fiber-reinforced CTB (FRCTB), was conducted to obtain the uniaxial compressive strength (UCS), failure evolution, and microstructural characteristics of FRCTB specimens. The results show that adding fibers could increase the UCS values of the CTB by 6.90% to 32.76%. The UCS value of the FRCTB increased with the increase in the polypropylene (PP) fiber content. Moreover, the reinforcement effect of PP fiber on the CTB was better than that of glass fiber. The addition of fiber could increase the peak strain of the FRCTB by 0.39% to 1.45%. The peak strain of the FRCTB increased with the increase in glass fiber content. The failure pattern of the FRCTB was coupled with tensile and shear failure. The addition of fiber effectively inhibited the propagation of cracks, and the bridging effect of cracks by the fiber effectively improved the mechanical properties of the FRCTB. The findings in this study can provide a basis for the backfilling design and optimization of mine backfilling methods.

Keywords

cemented tailings backfill / uniaxial compressive strength / combined fiber reinforcement / digital image correlation / microstructural characteristics

References

[1] Raffaldi MJ, Seymour JB, Richardson J, Zahl E, Board M. Cemented paste backfill geomechanics at a narrow-vein underhand cut-and-fill mine. Rock Mech. Rock Eng., 2019, 52(12): 4925.

[2] Liu L, Zhou P, Feng Y, Zhang B, Song KI. Quantitative investigation on micro-parameters of cemented paste backfill and its sensitivity analysis. J. Cent. South Univ., 2020, 27(1): 267.

[3] Chen QS, Sun SY, Liu YK, Qi CC, Zhou HB, Zhang QL. Immobilization and leaching characteristics of fluoride from phosphogypsum-based cemented paste backfill. Int. J. Miner. Metall. Mater., 2021, 28(9): 1440.

[4] Liu L, Xin J, Huan C, Zhao YJ, Fan X, Guo LJ, Song KI. Effect of curing time on the mesoscopic parameters of cemented paste backfill simulated using the particle flow code technique. Int. J. Miner. Metall. Mater., 2021, 28(4): 590.

[5] Wu D, Zhao RK, Xie CW, Liu S. Effect of curing humidity on performance of cemented paste backfill. Int. J. Miner. Metall. Mater., 2020, 27(8): 1046.

[6] Wang DL, Zhang QL, Chen QS, Qi CC, Feng Y, Xiao CC. Temperature variation characteristics in flocculation settlement of tailings and its mechanism. Int. J. Miner. Metall. Mater., 2020, 27(11): 1438.

[7] A. Antonova, M. Eik, V. Jokinen, and J. Puttonen, Effect of the roughness of steel fibre surface on its wettability and the cement paste close to fibre surface, Constr. Build. Mater., 289(2021), art. No. 123139.

[8] A.F. Guo, Z.H. Sun, and J. Satyavolu, Impact of modified kenaf fibers on shrinkage and cracking of cement pastes, Constr. Build. Mater., 264(2020), art. No. 120230.

[9] J.J. Li, S. Cao, and E. Yilmaz, Characterization of macro mechanical properties and microstructures of cement-based composites prepared from fly ash, gypsum and steel slag, Minerals, 12(2022), No. 1, art. No. 6.

[10] O. Hamdaoui, O. Limam, L. Ibos, and A. Mazioud, Thermal and mechanical properties of hardened cement paste reinforced with Posidonia-Oceanica natural fibers, Constr. Build. Mater., 269(2021), art. No. 121339.

[11] Yang L, Yilmaz E, Li JW, Liu H, Jiang HQ. Effect of superplasticizer type and dosage on fluidity and strength behavior of cemented tailings backfill with different solid contents. Constr. Build. Mater., 2018, 187, 290.

[12] J.J. Li, E. Yilmaz, and S. Cao, Influence of industrial solid waste as filling material on mechanical and microstructural characteristics of cementitious backfills, Constr. Build. Mater., 299(2021), art. No. 124288.

[13] Szeląg M. Evaluation of cracking patterns of cement paste containing polypropylene fibers. Compos. Struct., 2019, 220, 402.

[14] Chen X, Shi XZ, Zhou J, Chen QS, Li EM, Du XH. Compressive behavior and microstructural properties of tailings polypropylene fibre-reinforced cemented paste backfill. Constr. Build. Mater., 2018, 190, 211.

[15] Hambach M, Volkmer D. Properties of 3D-printed fiber-reinforced Portland cement paste. Cem. Concr. Compos., 2017, 79, 62.

[16] D.Y. Wei, C.F. Du, Y.F. Lin, and B.M. Chang, Impact factors of hydration heat of cemented tailings backfill based on multiindex optimization, Case Stud. Therm. Eng., 18(2020), art. No. 100601.

[17] Qi CC, Fourie A, Chen QS, Zhang QL. A strength prediction model using artificial intelligence for recycling waste tailings as cemented paste backfill. J. Cleaner Prod., 2018, 183, 566.

[18] Fall M, Célestin JC, Pokharel M, Touré M. A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill. Eng. Geol., 2010, 114(3–4): 397.

[19] Jiang HQ, Fall M. Yield stress and strength of saline cemented tailings in sub-zero environments: Portland cement paste backfill. Int. J. Miner. Process., 2017, 160, 68.

[20] Fall M, Pokharel M. Coupled effects of sulphate and temperature on the strength development of cemented tailings backfills: Portland cement-paste backfill. Cem. Concr. Compos., 2010, 32(10): 819.

[21] D. Zheng, W.D. Song, J.X. Fu, G.L. Xue, J.J. Li, and S. Cao, Research on mechanical characteristics, fractal dimension and internal structure of fiber reinforced concrete under uniaxial compression, Constr. Build. Mater., 258(2020), art. No. 120351.

[22] Z.Q. Huang, E. Yilmaz, and S. Cao, Analysis of strength and microstructural characteristics of mine backfills containing fly ash and desulfurized gypsum, Minerals, 11(2021), No. 4, art. No. 409.

[23] D. Zheng, W.D. Song, S. Cao, J.J. Li, and L.J. Sun, Investigation on dynamical mechanics, energy dissipation, and microstructural characteristics of cemented tailings backfill under SHPB tests, Minerals, 11(2021), No. 5, art. No. 542.

[24] Tan YY, Davide E, Zhou YC, Song WD, Meng X. Long-term mechanical behavior and characteristics of cemented tailings backfill through impact loading. Int. J. Miner. Metall. Mater., 2020, 27(2): 140.

[25] Zheng JR, Sun XX, Guo LJ, Zhang SM, Chen JY. Strength and hydration products of cemented paste backfill from sulphide-rich tailings using reactive MgO-activated slag as a binder. Constr. Build. Mater., 2019, 203, 111.

[26] Zheng D, Song WD, Tan YY, Cao S, Yang ZL, Sun LJ. Fractal and microscopic quantitative characterization of unclassified tailings flocs. Int. J. Miner. Metall. Mater., 2021, 28(9): 1429.

[27] Zhao YL, Ma ZY, Qiu JP, Sun XG, Gu XW. Experimental study on the utilization of steel slag for cemented ultrafine tailings backfill. Powder Technol., 2020, 375, 284.

[28] L. Liu, J. Xin, C. Huan, C.C. Qi, W.W. Zhou, and K.I. Song, Pore and strength characteristics of cemented paste backfill using sulphide tailings: Effect of sulphur content, Constr. Build. Mater., 237(2020), art. No. 117452.

[29] Chen QS, Zhang QL, Fourie A, Xin C. Utilization of phosphogypsum and phosphate tailings for cemented paste backfill. J. Environ. Manage., 2017, 201, 19.

[30] G.L. Xue, E. Yilmaz, G.R. Feng, and S. Cao, Bending behavior and failure mode of cemented tailings backfill composites incorporating different fibers for sustainable construction, Constr. Build. Mater., 289(2021), art. No. 123163.

[31] S. Cao, E. Yilmaz, Z.Y. Yin, G.L. Xue, W.D. Song, and L.J. Sun, CT scanning of internal crack mechanism and strength behavior of cement-fiber-tailings matrix composites, Cem. Concr. Compos., 116(2021), art. No. 103865.

[32] G.L. Xue, E. Yilmaz, G.R. Feng, S. Cao, and L.J. Sun, Reinforcement effect of polypropylene fiber on dynamic properties of cemented tailings backfill under SHPB impact loading, Constr. Build. Mater., 279(2021), art. No. 122417.

[33] G.L. Xue, E. Yilmaz, W.D. Song, and S. Cao, Fiber length effect on strength properties of polypropylene fiber reinforced cemented tailings backfill specimens with different sizes, Constr. Build. Mater., 241(2020), art. No. 118113.

[34] Xu WB, Li QL, Zhang YL. Influence of temperature on compressive strength, microstructure properties and failure pattern of fiber-reinforced cemented tailings backfill. Constr. Build. Mater., 2019, 222, 776.

[35] F. Xu, S.L. Wang, T. Li, B. Liu, B.B. Li, and Y. Zhou, Mechanical properties and pore structure of recycled aggregate concrete made with iron ore tailings and polypropylene fibers, J. Build. Eng., 33(2021), art. No. 101572.

[36] S. Cao, D. Zheng, E. Yilmaz, Z.Y. Yin, G.L. Xue, and F.D. Yang, Strength development and microstructure characteristics of artificial concrete pillar considering fiber type and content effects, Constr. Build. Mater., 256(2020), art. No. 119408.

[37] Y.D. Gan, H.Z. Zhang, Y. Zhang, Y.D. Xu, E. Schlangen, K.van Breugel, and B. Šavija, Experimental study of flexural fatigue behaviour of cement paste at the microscale, Int. J. Fatigue, 151(2021), art. No. 106378.

[38] B. Liu, J.K. Zhou, X.Y. Wen, X. Hu, and Z.H. Deng, Mechanical properties and constitutive model of carbon fiber reinforced coral concrete under uniaxial compression, Constr. Build. Mater., 263(2020), art. No. 120649.

[39] S. Chakilam and L. Cui, Effect of polypropylene fiber content and fiber length on the saturated hydraulic conductivity of hydrating cemented paste backfill, Constr. Build. Mater., 262(2020), art. No. 120854.

[40] Y.Y. Wang, Z.Q. Yu, and H.W. Wang, Experimental investigation on some performance of rubber fiber modified cemented paste backfill, Constr. Build. Mater., 271(2021), art. No. 121586.

[41] X. Chen, X.Z. Shi, J. Zhou, Z. Yu, and P.S. Huang, Determination of mechanical, flowability, and microstructural properties of cemented tailings backfill containing rice straw, Constr. Build. Mater., 246(2020), art. No. 118520.

[42] B.W. Liu, F. Yue, B. Chen, X.Y. Man, L. Chen, and S. Jaisee, Study on bond performance, flexural and crack extension behavior of base concrete prisms strengthen with strain-hardening cementitious composites (SHCC) using DIC technology, Constr. Build. Mater., 251(2020), art. No. 119035.