A review of the strengthening—toughening behavior and mechanisms of advanced structural materials by multifield coupling treatment

Abstract

The application of an external field is a promising method to control the microstructure of materials, leading to their improved performance. In the present paper, the strengthening and toughening behavior of some typical high-performance structural materials subjected to multifield coupling treatment, including electrostatic field, electro-pulse current, thermal field, and stress field, are reviewed in detail. In addition to the general observation that the plasticity of materials could be increased by multi-external fields, strength enhancement can be achieved by controlling atomic diffusion or phase transformations. The paper is not limited to the strengthening and toughening mechanisms of the multifield coupling effects on different types of structural materials but is intended to provide a generic method to improve both the strength and ductility of the materials. Finally, the prospects of the applications of multi-external fields have also been proposed based on current works.

Keywords

multifield coupling / structural materials / strengthening / toughening / microstructure

References

[1] P.J. Noell, J.M. Rodelas, Z.N. Ghanbari, and C.M. Laursen, Microstructural modification of additively manufactured metals by electropulsing, Addit. Manuf., 33(2020), art. No. 101128.

[2] Zhang L, Guo X, Gao JW, Deng AY, Wang EG. Effect of electromagnetic stirring on microstructure and mechanical properties of TiB₂ particle-reinforced steel. Acta Metall. Sin., 2020, 56(9): 1239

[3] Liu YC, Sommer F, Mittemeijer EJ. Austenite-ferrite transformation kinetics under uniaxial compressive stress in Fe-2.96 at.% Ni alloy. Acta Mater., 2009, 57(9): 2858.

[4] Zhang X, Li HW, Zhan M, Zheng ZB, Gao J, Shao GD. Electron force-induced dislocations annihilation and regeneration of a superalloy through electrical in situ transmission electron microscopy observations. J. Mater. Sci. Technol., 2020, 36, 79.

[5] Wu YT, Li C, Li YF, Wu J, Xia XC, Liu YC. Effects of heat treatment on the microstructure and mechanical properties of Ni₃Al-based superalloys: A review. Int. J. Miner. Metall. Mater., 2021, 28(4): 553.

[6] Wu D, Wang WL, Zhang LG, Wang ZY, Zhou KC, Liu LB. Erratum to: New high-strength Ti-Al-V-Mo alloy: From high-throughput composition design to mechanical properties. Int. J. Miner. Metall. Mater., 2020, 27(1): 129.

[7] Y.F. Wu, X.L. Zhang, X.F. Xu, X.W. Lin, and L. Liu, A review on the effect of external fields on solidification, melting and heat transfer enhancement of phase change materials, J. Energy Storage, 31(2020), art. No. 101567.

[8] Y.Q. Li, B. Li, D. Zhang, and L.F. Xie, External electric field induced structural transformation and decreased sensitivity of CL-20/EPDM composites, Chem. Phys. Lett., 757(2020), art. No. 137875.

[9] J.Q. Hao, S.Y. Qin, L.G. Yan, and X.F. Zhang, Breaking thermodynamic and kinetic barriers in superalloy homogenization process by electropulsing to improve mechanical properties, J. Alloys Compd., 873(2021), art. No. 159854.

[10] F. Maccari, D.Y. Karpenkov, E. Semenova, A.Y. Karpenkov, I.A. Radulov, K.P. Skokov, and O. Gutfleisch, Accelerated crystallization and phase formation in Fe₄₀Ni₄₀B₂₀ by electric current assisted annealing technique, J. Alloys Compd., 836(2020), art. No. 155338.

[11] D. Waryoba, Z. Islam, B.M. Wang, and A. Haque, Recrystallization mechanisms of Zircaloy-4 alloy annealed by electric current, J. Alloys Compd., 820(2020), art. No. 153409.

[12] Zheng XG, Shi YN, Lu K. Electro-healing cracks in nickel. Mater. Sci. Eng. A, 2013, 561, 52.

[13] Zhao YG, Ma BD, Guo HC, Ma J, Yang Q, Song JS. Electropulsing strengthened 2GPa boron steel with good ductility. Mater. Des., 2013, 43, 195.

[14] H.X. Zhang and X.F. Zhang, Softening behavior of Al-Zn-Mg alloys with different strengthening mechanisms in a coupled field, Mater. Sci. Eng. A, 771(2020), art. No. 138582.

[15] Zhu RF, Liu JN, Tang GY, Shi SQ, Fu MW. Properties, microstructure and texture evolution of cold rolled Cu strips under electropulsing treatment. J. Alloys Compd., 2012, 544, 203.

[16] Zhu YH, To S, Lee WB, Liu XM, Jiang YB, Tang GY. Effects of dynamic electropulsing on microstructure and elongation of a Zn-Al alloy. Mater. Sci. Eng. A, 2009, 501(1–2): 125.

[17] Ben DD, Yang HJ, Ma YR, Shao XH, Pang JC, Zhang ZF. Rapid hardening of AISI 4340 steel induced by electropulsing treatment. Mater. Sci. Eng. A, 2018, 725, 28.

[18] Kinsey B, Cullen G, Jordan A, Mates S. Investigation of electroplastic effect at high deformation rates for 304SS and Ti-6Al-4V. CIRP Ann., 2013, 62(1): 279.

[19] P.S. McNeff and B.K. Paul, Electroplasticity effects in Haynes 230, J. Alloys Compd., 829(2020), art. No. 154438.

[20] Baranov YV. Effect of electrostatic fields on mechanical characteristics and structure of metals and alloys. Mater. Sci. Eng. A, 2000, 287(2): 288.

[21] Savenko VS. Hardening of a bismuth crystal due to electroplastic deformation. Met. Sci. Heat Treat., 2007, 49(3–4): 147.

[22] Li JY, Ni P, Wang L, Tan Y. Influence of direct electric current on solidification process of Al-Si alloy. Mater. Sci. Semicond. Process., 2017, 61, 79.

[23] Li MJ, Tamura T, Omura N, Miwa KJ. Effects of magnetic field and electric current on the solidification of AZ91D magnesium alloys using an electromagnetic vibration technique. J. Alloys Compd., 2009, 487(1–2): 187.

[24] Wang RZ, Qi JG, Wang B, Zhang W, Wang JZ. Solidification behavior and crystal growth mechanism of aluminum under electric pulse. J. Mater. Process. Technol., 2016, 237, 235.

[25] Conrad H. Effects of electric current on solid state phase transformations in metals. Mater. Sci. Eng. A, 2000, 287(2): 227.

[26] Qiao Z, Li C, Zhang HJ, Liang HY, Liu YC, Zhang Y. Evaluation on elevated-temperature stability of modified 718-type alloys with varied phase configurations. Int. J. Miner. Metall. Mater., 2020, 27(8): 1123.

[27] Diepold B, Vorlaufer N, Neumeier S, Gartner T, Göken M. Optimization of the heat treatment of additively manufactured Ni-base superalloy IN₇₁₈. Int. J. Miner. Metall. Mater., 2020, 27(5): 640.

[28] Wang L, Liu Y, Cui T, Zhao X. Effects of electric-field treatment on a Ni-base superalloy. Rare Met., 2007, 26(Suppl. 1): 210

[29] Liu Y, Wang L, Ding Y, Cui T, Wang YQ. Effects of electric field treatment on microstructure and deformation behavior of GH4199 superalloy. Chin. J. Nonferrous Met., 2006, 16(10): 1749

[30] Liu Y, Wang L, Qiao XY, Wang YQ. Effects of strain rate on tensile deformation behavior of GH4199 superalloy after electric field treatment. Rare Met. Mater. Eng., 2008, 37(1): 66

[31] Liu Y. Effects of Electric-Field Treatment on the Microstructure Evolution, Deformation Behavior and Corrosion Properties of Nickel-base Superalloys, 2008, Shenyang, Northeastern University [Dissertation]

[32] D. Yuan, L. Wang, Y. Liu, X. Song, and C. Liu, Study on tensile property and dynamic recrystallization of GH4169 alloy with pulse current at elevated temperatures, [in] Proceedings of the 13th China Annual Meeting of Superalloy, Beijing, 2015, p. 343.

[33] Liu Y, Wang L, Liu HH, Lu XD, Zhang BJ. Effects of pulse current on dynamic recrystallization behavior of GH4169 superalloy. Mater. Trans., 2012, 53(8): 1400.

[34] An JL, Wang L, Song X, Liu Y. New approach for plastic deformation behavior of GH4169 superalloy with in situ electric-pulse current at 800 °C. Mater. Sci. Eng. A, 2017, 707, 356.

[35] Wang L, An JL, Liu Y, Song X. Deformation behavior and strengthening—toughening mechanism of GH4169 alloy with multi-field coupling. Acta Metall. Sin., 2019, 55(9): 1185

[36] Li GD, Wang L, Liu Y, Zhang W, Qiao XY, Wang YQ. Effects of high density electropulsing treatment on aging kinetics of GH4199 alloy. Rare Met. Mater. Eng., 2011, 40(6): 961.

[37] S.Y. Qin, L.G. Yan, and X.F. Zhang, Eliminating topologically closed-packed phases in deteriorated nickel-based superalloy by pulsed electric current, J. Alloys Compd., 862(2021), art. No. 158508.

[38] S.Y. Qin, J.Q. Hao, L.G. Yan, and X.F. Zhang, Ultrafast solution treatment to improve the comprehensive mechanical properties of superalloy by pulsed electric current, Scripta Mater., 199(2021), art. No. 113879.

[39] Zhang Z, Zhang JH, Wang J, Li ZH, Xie JS, Liu SJ, Guan K, Wu RZ. Toward the development of Mg alloys with simultaneously improved strength and ductility by refining grain size via the deformation process. Int. J. Miner. Metall. Mater., 2021, 28(1): 30.

[40] Kang GZ, Li H. Review on cyclic plasticity of magnesium alloys: Experiments and constitutive models. Int. J. Miner. Metall. Mater., 2021, 28(4): 567.

[41] Wang J, Wang L, Liu Y, An JL, Song X. Tensile deformation behavior and microstructure evolution of AZ31 magnesium alloy under pulse current. Rare Met. Mater. Eng., 2018, 47(6): 1906

[42] Xie HY, Wang Q, Peng F, Liu K, Dong XH, Wang JF. Electroplastic effect in AZ31B magnesium alloy sheet through uniaxial tensile tests. Trans. Nonferrous Met. Soc. China, 2015, 25(8): 2686.

[43] Jiang YB, Guan L, Tang GY, Zhang ZH. Improved mechanical properties of Mg-9Al-1Zn alloy by the combination of aging, cold-rolling and electropulsing treatment. J. Alloys Compd., 2015, 626, 297.

[44] Jin W, Fan JF, Zhang H, Liu Y, Dong HB, Xu BS. Microstructure, mechanical properties and static recrystallization behavior of the rolled ZK60 magnesium alloy sheets processed by electropulsing treatment. J. Alloys Compd., 2015, 646, 1.

[45] Z.H. Shan, J. Yang, J.F. Fan, H. Zhang, Q. Zhang, Y.C. Wu, and H.B. Dong, Microstructure evolution and mechanical properties of an AZ61 alloy processed with TS-ECAP and EPT, Mater. Sci. Eng. A, 780(2020), art. No. 139195.

[46] Xu C, Li YN, Rao XH. Effect of electropulsing rolling on mechanical properties and microstructure of AZ31 magnesium alloy. Trans. Nonferrous Met. Soc. China, 2014, 24(12): 3777.

[47] Liao HM, Tang GY, Jiang YB, Xu Q, Sun SD, Liu JN. Effect of thermo-electropulsing rolling on mechanical properties and microstructure of AZ31 magnesium alloy. Mater. Sci. Eng. A, 2011, 529, 138.

[48] Long W, Zhang S, Liang YL, Ou MG. Influence of multi-stage heat treatment on the microstructure and mechanical properties of TC21 titanium alloy. Int. J. Miner. Metall. Mater., 2021, 28(2): 296.

[49] Parvizian P, Morakabati M, Sadeghpour S. Effect of hot rolling and annealing temperatures on the microstructure and mechanical properties of SP-700 alloy. Int. J. Miner. Metall. Mater., 2020, 27(3): 374.

[50] Shi Q. Effects of Pulse Current on Tensile Deformation Behavior of Pure Titanium, 2017, Shenyang, Northeastern University [Dissertation]

[51] Ao DW, Chu XR, Yang Y, Lin SX, Gao J. Effect of electropulsing treatment on microstructure and mechanical behavior of Ti-6Al-4V alloy sheet under argon gas protection. Vacuum, 2018, 148, 230.

[52] Song H, Wang ZJ, Gao TJ. Effect of high density electropulsing treatment on formability of TC4 titanium alloy sheet. Trans. Nonferrous Met. Soc. China, 2007, 17(1): 87.

[53] Gao LL, Liu JX, Cheng XW, Li SK, Luo YM, Guo QW. Effects of short time electric pulse heat treatment on microstructures and mechanical properties of hot-rolled Ti-6Al-4V alloy. Mater. Sci. Eng. A, 2014, 618, 104.

[54] Zhao ZY, Wang GF, Zhang YL, Wang YQ, Hou HL. Fast recrystallization and phase transformation in ECAP deformed Ti-6Al-4V alloy induced by pulsed electric current. J. Alloys Compd., 2019, 786, 733.

[55] Ao DW, Gao J, Chu XR, Lin SX, Lin J. Formability and deformation mechanism of Ti-6Al-4V sheet under electropulsing assisted incremental forming. Int. J. Solids Struct., 2020, 202, 357.

[56] Song H, Wang ZJ. Microcrack healing and local recrystallization in pre-deformed sheet by high density electropulsing. Mater. Sci. Eng. A, 2008, 490(1–2): 1.

[57] X.W. Ren, Z.J. Wang, X. Fang, H. Song, and J. Duan, The plastic flow model in the healing process of internal microcracks in pre-deformed TC4 sheet by pulse current, Mater. Des., 188(2020), art. No. 108428.

[58] Song H, Wang ZJ. Improvement of mechanical properties of cold-rolled commercially pure Ti sheet by high density electropulsing. Trans. Nonferrous Met. Soc. China, 2012, 22(6): 1350.

[59] L. Wang, X. Song, and Y. Liu, A Preparation Method of High-Strength Pure Titanium Sheet, Chinese Patent, CN201510904539.4, 2015.

[60] Yu T, Deng DW, Wang G, Zhang HC. Crack healing in SUS304 stainless steel by electropulsing treatment. J. Clean. Prod., 2016, 113, 989.

[61] Zhou YZ, Guo JD, Gao M, He GH. Crack healing in a steel by using electropulsing technique. Mater. Lett., 2004, 58(11): 1732.

[62] A. Kumar and S.K. Paul, Healing of fatigue crack in steel with the application of pulsed electric current, Materialia, 14(2020), art. No. 100906.

[63] C. Wu, X.M. Qiu, X.F. Xu, P.L. Yin, and Y.G. Zhao, A model for rapid austenitization in steel with ferrite and pearlite microstructure under electropulsing, Materialia, 6(2019), art. No. 100343.

[64] J.T. Zhang, Z.H. Liu, J.X. Sun, H.L. Zhao, Q.Y. Shi, and D.W. Ma, Microstructure and mechanical property of electropulsing tempered ultrafine grained 42CrMo steel, Mater. Sci. Eng. A, 782(2020), art. No. 139213.

[65] Rahnama A, Qin RS. The effect of electropulsing on the interlamellar spacing and mechanical properties of a hot-rolled 0.14% carbon steel. Mater. Sci. Eng. A, 2015, 627, 145.

[66] Fard RA, Kazeminezhad M. Effect of electropulsing on microstructure and hardness of cold-rolled low carbon steel. J. Mater. Res. Technol., 2019, 8(3): 3114.

[67] D. Pan, Y.G. Zhao, X.F. Xu, Y.T. Wang, W.Q. Jiang, and X.Y. Chong, A novel strengthening and toughening strategy for T250 maraging steel: Cluster-orientation governed higher strength-ductility combination induced by electropulsing, Mater. Des., 169(2019), art. No. 107686.

[68] Zhang JJ, Chen Z, Wang YX, Liu B. Gibbs free energy calculation of Al-Cu-Li alloy with the effect of electric field from electron level. J. Alloys Compd., 2008, 457(1–2): 526.

[69] Xu XF, Zhao YG, Ma BD, Zhang M. Rapid precipitation of T-phase in the 2024 aluminum alloy via cyclic electropulsing treatment. J. Alloys Compd., 2014, 610, 506.

[70] Xu XF, Zhao YG, Wang XD, Zhang YY, Ning YH. Effect of rapid solid-solution induced by electropulsing on the microstructure and mechanical properties in 7075 Al alloy. Mater. Sci. Eng. A, 2016, 654, 278.

[71] Y. Wang, Study on Mechanism of Microstructure Evolution of GH4169 Superalloy by Electric Field Treatment [Dissertation], Shenyang, 2013.

[72] Wang L, Wang Y, Liu Y, Song X, Lü XD, Zhang BJ. Coarsening behavior of γ′ and γ″ phases in GH4169 superalloy by electric field treatment. Int. J. Miner. Metall. Mater., 2013, 20(9): 861.

[73] Wang Y, Wang L, Chao YS, Lü XD. Effect of aging temperatures with electric field on point defects in GH4169 alloy. J. Northeast. Univ. Nat. Sci., 2011, 32(12): 1733

[74] Wang Y, Wang L, Fei JL, Liu Y, Du JH, Zhang BJ. Influence of electrostatic field treatment on microstructures and mechanical properties of GH4169 superalloy. Mater. Res. Innovations, 2014, 18(Suppl. 4): S4-276.

[75] An JL, Wang L, Song X, Liu Y, Gai ZY, Cao XZ. Improving mechanism of both strength and ductility of GH4169 alloy induced by electric-pulse treatment. Mater. Sci. Eng. A, 2018, 724, 439.

[76] Liu Y, Wang L, Feng F, Zhang BJ, Zhao GP. Effects of electropulsing treatment on coarsening behavior of γ′ phase in a nikel base superalloy. J. Mater. Metall., 2011, 10(4): 288

[77] Yang YJ, Peng JQ, Wang L, Wang Y. Effect of electric field aging on microstructure evolution of GH4169 superalloy. Mater. Rep., 2016, 30(Suppl. 2): 516

[78] Wang Y, Wang L, Liu Y, Song X, Zhang BJ, Du JH. Solute atom migration in GH4169 superalloy under electrostatic fields. Int. J. Miner. Metall. Mater., 2013, 20(12): 1176.

[79] Zhang XY, Wang L, Wang Y, Liu Y, Lv XD, Chao YS. Effect of electrostatic-field treatment on the diffusion behaveors of Fe and Cr in GH4169 superalloy. J. Iron Steel Res., 2011, 23(Suppl. 2): 146

[80] Wang L, An JL, Liu Y, Song X, Xu GH, Zhao GP. Influence of electric field treatment on precipitation behavior of δ phase in GH4169 superalloy. Acta Metall. Sin., 2015, 51(10): 1235

[81] An JL, Wang L, Liu Y, Cai WL, Song X. The role of δ phase for fatigue crack propagation behavior in a Ni base super-alloy at room temperature. Mater. Sci. Eng. A, 2017, 684, 312.

[82] Y. Liu, L. Wang, X. Song, and Y. Wang, Effect of external field treatment on the microstructure and deformation behavior of nickel-base superalloy, [in] E. Gdoutos and M. Konsta-Gdoutos, eds., Proceedings of the Third International Conference on Theoretical, Applied and Experimental Mechanics, Athens, 2020, p. 70.

[83] K. Han, S.X. Qin, H.P. Li, J. Liu, Y. Wang, C.C. Zhang, P. Zhang, S. Zhang, H.B. Zhang, and H.P. Zhou, EBSD study of the effect of electropulsing treatment on the microstructure evolution in a typical cold-deformed Ni-based superalloy, Mater. Charact., 158(2019), art. No. 109936.

[84] Zhang HB, Zhang CC, Han BK, Qiu JF, Li HP, Qin SX, Liu J, Wang Y, Zhang P, Pan YK, Zhou HP. Evolution of grain boundary character distributions in a cold-deformed nickel-based superalloy during electropulsing treatment. J. Mater. Res. Technol., 2020, 9(3): 5723.

[85] Jiang YB, Tang GY, Shek C, Xie JX, Xu ZH, Zhang ZH. Mechanism of electropulsing induced recrystallization in a cold-rolled Mg-9Al-1Zn alloy. J. Alloys Compd., 2012, 536, 94.

[86] Gao B, Wang L, Liu Y, He YW, Mo T. Effects of electron pulsing current on static recrystallization behaviour of GH4049 superalloy. Mater. Sci. Technol., 2014, 22(5): 1

[87] Wang ZJ, Song H. Effect of electropulsing on anisotropy behaviour of cold-rolled commercially pure titanium sheet. Trans. Nonferrous Met. Soc. China, 2009, 19(Suppl. 2): s409.

[88] Zhou Y, Chen GQ, Fu XS, Zhou WL. Effect of electropulsing on deformation behavior of Ti-6Al-4V alloy during cold drawing. Trans. Nonferrous Met. Soc. China, 2014, 24(4): 1012.

[89] Shan ZH, Bai J, Fan JF, Wu HF, Zhang H, Zhang Q, Wu YC, Li WG, Dong HB, Xu BS. Exceptional mechanical properties of AZ31 alloy wire by combination of cold drawing and EPT. J. Mater. Sci. Technol., 2020, 51, 111.

[90] Jiang YB, Guan L, Tang GY, Shek C, Zhang ZH. Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg-9Al-1Zn alloy strip. Mater. Sci. Eng. A, 2011, 528(16–17): 5627.