Effects of Li addition on the microstructure and tensile properties of the extruded Mg-1Zn-xLi alloy

Abstract

Li addition is verified to be an effective method to increase the room temperature ductility and formability of Mg alloys. In the present study, the microstructure, texture, and tensile properties of the extruded Mg-1Zn-xLi (wt%, x = 0, 1, 3, 5) alloy sheets were studied by X-ray diffraction (XRD), scanning electron microscope (SEM), and electron backscatter diffraction (EBSD). It was found that Li addition resulted in the grain coarsening and the development of new transverse direction (TD)-tilting and 〈$10\bar{1}0$〉 parallel to extrusion direction textures, which was related to the improved dynamic recrystallization and the increased prismatic slip during extrusion. The Mg-1Zn−5Li sheet showed the weakest texture, which contained both basal and TD-tilting oriented grains. No additional phase was formed with Li addition. The yield strength of Mg-1Zn-xLi sheets gradually decreased with increasing Li content, which was mainly related to the grain coarsening and texture weakening. In addition, the ductility of the Mg-1Zn-xLi sheet was remarkably enhanced by Li addition. The elongation of the Mg-1Zn-5Li sheet was 30.3% along the TD, which was three times than that of Mg-1Zn sheet. Microstructural analysis implied that this significant ductility enhancement was associated with the improvement activation of prismatic and basal slips during the tensile tests. This study may provide insights into the development of high-ductility, low-density Mg-Zn-Li based alloys.

Keywords

Mg-1Zn-xLi alloy / texture / prismatic slip / tensile properties

References

[1] Ma YZ, Yang CL, Liu YJ, Yuan FS, Liang SS, Li HX, Zhang JS. Microstructure, mechanical, and corrosion properties of extruded low-alloyed Mg-xZn−0.2Ca alloys. Int. J. Miner. Metall. Mater., 2019, 26(10): 1274.

[2] Kandemir S, Gavras S, Dieringa H. High temperature tensile, compression and creep behavior of recycled short carbon fibre reinforced AZ91 magnesium alloy fabricated by a high shearing dispersion technique. J. Magnes. Alloys, 2021, 9(5): 1753.

[3] Zhang Z, Zhang JH, Wang J, Li ZH, Xie JS, Liu SJ, Guan K, Wu RZ. Toward the development of Mg alloys with simultaneously improved strength and ductility by refining grain size via the deformation process. Int. J. Miner. Metall. Mater., 2021, 28(1): 30.

[4] Zhang HF, Zhou L, Li WL, Li GH, Tang YT, Guo N, Feng JC. Effect of tool plunge depth on the microstructure and fracture behavior of refill friction stir spot welded AZ91 magnesium alloy joints. Int. J. Miner. Metall. Mater., 2021, 28(4): 699.

[5] Zhang C, Wu L, Zhao ZL, Huang GS, Jiang B, Atrens A, Pan FS. Effect of the Al-Si eutectic on the microstructure and corrosion behavior of the single-phase Mg alloy Mg-4Li. J. Magnes. Alloys, 2021, 9(4): 1339.

[6] Li CQ, He YB, Huang HP. Effect of lithium content on the mechanical and corrosion behaviors of HCP binary Mg-Li alloys. J. Magnes. Alloys, 2021, 9(2): 569.

[7] Son HT, Kim YH, Kim DW, Kim JH, Yu HS. Effects of Li addition on the microstructure and mechanical properties of Mg-3Zn−1Sn−0.4Mn based alloys. J. Alloys Compd., 2013, 564, 130.

[8] Wang BJ, Xu DK, Cai X, Qiao YX, Sheng LY. Effect of rolling ratios on the microstructural evolution and corrosion performance of an as-rolled Mg-8 wt%Li alloy. J. Magnes. Alloys, 2021, 9(2): 560.

[9] Zeng Y, Jiang B, Yang QR, Quan GF, He JJ, Jiang ZT, Pan FS. Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets. Mater. Sci. Eng. A, 2017, 700, 59.

[10] Liu WC, Feng S, Li ZQ, Zhao J, Wu GH, Wang XF, Xiao L, Ding WJ. Effect of rolling strain on microstructure and tensile properties of dual-phase Mg-8Li−3Al−2Zn−0.5Y alloy. J. Mater. Sci. Technol., 2018, 34(12): 2256.

[11] Leu JS, Chiang CT, Lee S, Chen YH, Chu CL. Strengthening and room temperature age-softening of superlight Mg-Li alloys. J. Mater. Eng. Perform., 2010, 19(9): 1235.

[12] Guo J, Chang LL, Zhao YR, Jin YP. Effect of Sn and Y addition on the microstructural evolution and mechanical properties of hot-extruded Mg-9Li−3Al alloy. Mater. Charact., 2019, 148, 35.

[13] Sha GY, Sun XG, Liu T, Zhu YH, Yu T. Effects of Sc addition and annealing treatment on the microstructure and mechanical properties of the as-rolled Mg-3Li alloy. J. Mater. Sci. Technol., 2011, 27(8): 753.

[14] Wang HY, Rong J, Liu GJ, Zha M, Wang C, Luo D, Jiang QC. Effects of Zn on the microstructure and tensile properties of as-extruded Mg-8Al−2Sn alloy. Mater. Sci. Eng. A, 2017, 698, 249.

[15] H. Ji, G.H. Wu, W.C. Liu, X.L. Liang, G.L. Liao, and D.H. Ding, Microstructure characterization and mechanical properties of the as-cast and as-extruded Mg-xLi−5Zn−0.5Er (x = 8, 10 and 12wt%) alloys, Mater. Charact., 159(2020), art. No. 110008.

[16] Tang Y, Le QC, Misra RDK, Su GQ, Cui JZ. Influence of extruding temperature and heat treatment process on microstructure and mechanical properties of three structures containing Mg-Li alloy bars. Mater. Sci. Eng. A, 2018, 712, 266.

[17] Sun YH, Wang RC, Ren J, Peng CQ, Cai ZY. Microstructure, texture, and mechanical properties of as-extruded Mg-xLi−3Al−2Zn−0.2Zr alloys (x = 5, 7, 8, 9, 11 wt%). Mater. Sci. Eng. A, 2019, 755, 201.

[18] Y.H. Sun, R.C. Wang, C.Q. Peng, and Z.Y. Cai, Microstructure and corrosion behavior of as-extruded Mg-xLi−3Al−2Zn−0.2Zr alloys (x = 5, 8, 11wt.%), Corros. Sci., 167(2020), art. No. 108487.

[19] Ahmadieh A, Mitchell J, Dorn JE. Lithium alloying and dislocation mechanisms for prismatic slip in magnesium. Trans. Metall. Soc. AIME, 1965, 233, 1130

[20] Al-Samman T. Comparative study of the deformation behavior of hexagonal magnesium-lithium alloys and a conventional magnesium AZ31 alloy. Acta Mater., 2009, 57(7): 2229.

[21] Zeng Y, Jiang B, Li RH, He JJ, Xia XS, Pan FS. Effect of Li content on microstructure, texture and mechanical properties of cold rolled Mg-3Al−1Zn alloy. Mater. Sci. Eng. A, 2015, 631, 189.

[22] Yang QS, Jiang B, Song B, Yu ZJ, He DW, Chai YF, Zhang JY, Pan FS. The effects of orientation control via tension-compression on microstructural evolution and mechanical behavior of AZ31 Mg alloy sheet. J. Magnes. Alloys, 2022, 10(2): 411.

[23] Chai YF, Song Y, Jiang B, Fu J, Jiang ZT, Yang QS, Sheng HR, Huang GS, Zhang DF, Pan FS. Comparison of microstructures and mechanical properties of composite extruded AZ31 sheets. J. Magnes. Alloys, 2019, 7(4): 545.

[24] Li HX, Qin SK, Ma YZ, Wang J, Liu YJ, Zhang JS. Effects of Zn content on the microstructure and the mechanical and corrosion properties of as-cast low-alloyed Mg-Zn-Ca alloys. Int. J. Miner. Metall. Mater., 2018, 25(7): 800.

[25] Jiang MG, Xu C, Yan H, Fan GH, Nakata T, Lao CS, Chen RS, Kamado S, Han EH, Lu BH. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion. Acta Mater., 2018, 157, 53.

[26] Ando S, Tonda H. Non-basal slips in magnesium and magnesium-lithium alloy single crystals. Mater. Sci. Forum, 2000, 350–351, 43.

[27] Mackenzie LWF, Pekguleryuz M. The influences of alloying additions and processing parameters on the rolling microstructures and textures of magnesium alloys. Mater. Sci. Eng. A, 2008, 480(1–2): 189.

[28] J. Zhao, B. Jiang, Y. Yuan, A.T. Tang, H.R. Sheng, T.H. Yang, G.S. Huang, D.F. Zhang, and F.S. Pan, Influence of Zn addition on the microstructure, tensile properties and work-hardening behavior of Mg-1Gd alloy, Mater. Sci. Eng. A, 772(2020), art. No. 138779.

[29] Hansen N. Hall-Petch relation and boundary strengthening. Scripta. Mater., 2004, 51(8): 801.

[30] Xu J, Yang TH, Jiang B, Song JF, He JJ, Wang QH, Chai YF, Huang GS, Pan FS. Improved mechanical properties of Mg-3Al-1Zn alloy sheets by optimizing the extrusion die angles: Microstructural and texture evolution. J. Alloys Compd., 2018, 762, 719.

[31] Wang QH, Shen YQ, Jiang B, Tang AT, Song JF, Jiang ZT, Yang TH, Huang GS, Pan FS. A micro-alloyed Mg-Sn-Y alloy with high ductility at room temperature. Mater. Sci. Eng. A, 2018, 735, 131.

[32] Zhao J, Jiang B, Yuan Y, Wang QH, Yuan M, Tang AT, Huang GS, Zhang DF, Pan FS. Understanding the enhanced ductility of Mg-Gd with Ca and Zn microalloying by slip trace analysis. J. Mater. Sci. Technol., 2021, 95, 20.

[33] Chun YB, Davies CHJ. Investigation of prism 〉a〈 slip in warm-rolled AZ₃₁ alloy. Metall. Mater. Trans. A, 2011, 42, 4113.

[34] Nandy S, Tsai SP, Stephenson L, Raabe D, Zaefferer S. The role of Ca, Al and Zn on room temperature ductility and grain boundary cohesion of magnesium. J. Magnes. Alloys, 2021, 9(5): 1521.

[35] Li RH, Pan FS, Jiang B, Dong HW, Yang QS. Effect of Li addition on the mechanical behavior and texture of the as-extruded AZ31 magnesium alloy. Mater. Sci. Eng. A, 2013, 562, 33.

[36] J. Zhao, B. Jiang, A.T. Tang, Y.F. Chai, B. Liu, H.R. Sheng, T.H. Yang, G.S. Huang, D.F. Zhang, and F.S. Pan, Deformation behavior and texture evolution in an extruded Mg-Li sheet with non-basal texture during tensile deformation, Mater. Charact., 159(2020), art. No. 110041.

[37] Xia DB, Huang GS, Deng QY, Jiang B, Liu SS, Pan FS. Influence of stress state on microstructure evolution of AZ31 Mg alloy rolled sheet during deformation at room temperature. Mater. Sci. Eng. A, 2018, 715, 379.