Role of trace additions of Ca and Sn in improving the corrosion resistance of Mg-3Al-1Zn alloy

Abstract

The limited wide applicability of commercial Mg alloys is mainly attributed to the poor corrosion resistance. Addition of alloying elements is the simplest and effective method to improve the corrosion properties. Based on the low-cost alloy composition design, the corrosion behavior of commercial Mg-3Al-1Zn (AZ31) alloy bearing minor Ca or Sn element was characterized by scanning Kelvin probe force microscopy, hydrogen evolution, electrochemical measurements, and corrosion morphology analysis. Results revealed that the potential difference of Al₂Ca/α-Mg and Mg₂Sn/α-Mg was (230 ± 19) mV and (80 ± 6) mV, respectively, much lower than that of Al₈Mn₅/α-Mg (430 ± 31) mV in AZ31 alloy, which illustrated that AZ31-0.2Sn alloy performed the best corrosion resistance, followed by AZ31-0.2Ca, while AZ31 alloy exhibited the worst corrosion resistance. Moreover, Sn dissolved into matrix obviously increased the potential of α-Mg and participated in the formation of dense SnO₂ film at the interface of matrix, while Ca element was enriched in the corrosion product layer, resulting in the corrosion product layer of AZ31-0.2Ca/Sn alloys more compact, stable, and protective than AZ31 alloy. Therefore, AZ31 alloy bearing 0.2wt% Ca or Sn element exhibited excellent balanced properties, which is potential to be applied in commercial more comprehensively.

Keywords

AZ31 Mg alloy / micro-galvanic corrosion / alloying addition / Volta potential / precipitates

References

[1] Zhang Z, Zhang JH, Wang J, Li ZH, Xie JS, Liu SJ, Guan K, Wu RZ. Toward the development of Mg alloys with simultaneously improved strength and ductility by refining grain size via the deformation process. Int. J. Miner. Metall. Mater., 2021, 28(1): 30.

[2] Koltygin AV, Bazhenov VE, Khasenova RS, Komissarov AA, Bazlov AI, Bautin VA. Effects of small additions of Zn on the microstructure, mechanical properties and corrosion resistance of WE43B Mg alloys. Int. J. Miner. Metall. Mater., 2019, 26(7): 858.

[3] Ding ZY, Cui LY, Zeng RC, Zhao YB, Guan SK, Xu DK, Lin CG. Exfoliation corrosion of extruded Mg-Li-Ca alloy. J. Mater. Sci. Technol., 2018, 34(9): 1550.

[4] Arrabal R, Mingo B, Pardo A, Matykina E, Mohedano M, Merino MC, Rivas A, Maroto A. Role of alloyed Nd in the microstructure and atmospheric corrosion of as-cast magnesium alloy AZ91. Corros. Sci., 2015, 97, 38.

[5] Zhu GM, Wang LY, Wang J, Wang J, Park JS, Zeng XQ. Highly deformable Mg-Al-Ca alloy with Al₂Ca precipitates. Acta Mater., 2020, 200, 236.

[6] S. Sanyal, M. Paliwal, T.K. Bandyopadhyay, and S. Mandal, Evolution of microstructure, phases and mechanical properties in lean as-cast Mg-Al-Ca-Mn alloys under the influence of a wide range of Ca/Al ratio, Mater. Sci. Eng. A, 800(2021), art. No. 140322.

[7] Ma YZ, Yang CL, Liu YJ, Yuan FS, Liang SS, Li HX, Zhang JS. Microstructure, mechanical, and corrosion properties of extruded low-alloyed Mg-xZn-0.2Ca alloys. J. Miner. Metall. Mater., 2019, 26(10): 1274.

[8] Elamami HA, Incesu A, Korgiopoulos K, Pekguleryuz M, Gungor A. Phase selection and mechanical properties of permanent-mold cast Mg-Al-Ca-Mn alloys and the role of Ca/Al ratio. J. Alloys Compd., 2018, 764, 216.

[9] Wang B, Chen XH, Pan FS, Mao JJ. Effects of Sn addition on microstructure and mechanical properties of Mg-Zn-Al alloys. Prog. Nat. Sci. Mater. Int., 2017, 27(6): 695.

[10] Bae SW, Kim SH, Lee JU, Jo WK, Hong WH, Kim W, Park SH. Improvement of mechanical properties and reduction of yield asymmetry of extruded Mg-Al-Zn alloy through Sn addition. J. Alloys Compd., 2018, 766, 748.

[11] X. Chen, D.F. Zhang, J.Y. Xu, J.K. Feng, Y. Zhao, B. Jiang, and F.S. Pan, Improvement of mechanical properties of hot extruded and age treated Mg-Zn-Mn-Ca alloy through Sn addition, J. Alloys Compd., 850(2021), art. No. 156711.

[12] Ahmad Z, Ul-Hamid A, Abdul-Aleem BJ. The corrosion behavior of scandium alloyed Al 5052 in neutral sodium chloride solution. Corros. Sci., 2001, 43(7): 1227.

[13] Cui LY, Gao SD, Li PP, Zeng RC, Zhang F, Li SQ, Han EH. Corrosion resistance of a self-healing micro-arc oxidation/polymethyltrimethoxysilane composite coating on magnesium alloy AZ31. Corros. Sci., 2017, 118, 84.

[14] Y.H. Liu, W.L. Cheng, Y. Zhang, X.F. Niu, H.X. Wang, and L.F. Wang, Microstructure, tensile properties, and corrosion resistance of extruded Mg-1Bi-1Zn alloy: The influence of minor Ca addition, J. Alloys Compd., 815(2020), art. No. 152414.

[15] C. He, B.H. Luo, Y.Y. Zheng, Y. Yin, Z.H. Bai, and Z.W. Ren, Effect of Sn on microstructure and corrosion behaviors of Al-Mg-Si alloys, Mater. Charact., 156(2019), art. No. 109836.

[16] Y.M. Jin, C. Blawert, H. Yang, B. Wiese, F. Feyerabend, J. Bohlen, D. Mei, M. Deng, M.S. Campos, N. Scharnagl, K. Strecker, J.L. Bode, C. Vogt, and R. Willumeit-Römer, Microstructure-corrosion behaviour relationship of micro-alloyed Mg-0.5Zn alloy with the addition of Ca, Sr, Ag, In and Cu, Mater. Des., 195(2020), art. No. 108980.

[17] Zhang WJ, Li MH, Chen Q, Hu WY, Zhang WM, Xin W. Effects of Sr and Sn on microstructure and corrosion resistance of Mg-Zr-Ca magnesium alloy for biomedical applications. Mater. Des., 2012, 39, 379.

[18] S.M. Baek, S.Y. Lee, J.C. Kim, J. Kwon, H. Jung, S. Lee, K.S. Lee, and S.S. Park, Role of trace additions of Mn and Y in improving the corrosion resistance of Mg-3Al-1Zn alloy, Corros. Sci., 178(2021), art. No. 108998.

[19] Yang L, Huang Y, Feyerabend F, Willumeit R, Mendis C, Kainer KU, Hort N. Microstructure, mechanical and corrosion properties of Mg-Dy-Gd-Zr alloys for medical applications. Acta Biomater., 2013, 9(10): 8499.

[20] Ha HY, Kang JY, Kim SG, Kim B, Park SS, Yim CD, You BS. Influences of metallurgical factors on the corrosion behaviour of extruded binary Mg-Sn alloys. Corros. Sci., 2014, 82, 369.

[21] Pawar S, Zhou X, Hashimoto T, Thompson GE, Scamans G, Fan Z. Investigation of the microstructure and the influence of iron on the formation of Al₈Mn₅ particles in twin roll cast AZ31 magnesium alloy. J. Alloys Compd., 2015, 628, 195.

[22] C. Zhang, L. Wu, G.S. Huang, Y. Huang, B. Jiang, A. Atrens, and F.S. Pan, Effect of microalloyed Ca on the microstructure and corrosion behavior of extruded Mg alloy AZ31, J. Alloys Compd, 823(2020), art. No. 153844.

[23] Liu Y, Cheng WL, Gu XJ, Liu YH, Cui ZQ, Wang LF, Wang HX. Tailoring the microstructural characteristic and improving the corrosion resistance of extruded dilute Mg-0.5Bi-0.5Sn alloy by microalloying with Mn. J. Magnes. Alloys, 2021, 9(5): 1656.

[24] Z. Hu, Z. Yin, Z. Yin, K. Wang, Q.D. Liu, P.F. Sun, H. Yan, H.G. Song, C. Luo, H.Y. Guan, and C. Luc, Corrosion behavior characterization of as extruded Mg-8Li-3Al alloy with minor alloying elements (Gd, Sn and Cu) by scanning Kelvin probe force microscopy, Corros. Sci., 176(2020), art. No. 108923.

[25] Wang YJ, Zhang Y, Wang PP, Zhang D, Yu BW, Xu Z, Jiang HT. Effect of LPSO phases and aged-precipitations on corrosion behavior of as-forged Mg-6Gd-2Y-1Zn-0.3Zr alloy. J. Mater. Res. Technol., 2020, 9(4): 7087.

[26] Liu WJ, Cao FH, Chen AN, Chang LR, Zhang JQ, Cao CN. Corrosion behaviour of AM60 magnesium alloys containing Ce or La under thin electrolyte layers. Part 1: Microstructural characterization and electrochemical behaviour. Corros. Sci., 2010, 52(2): 627.

[27] Jeong YS, Kim WJ. Enhancement of mechanical properties and corrosion resistance of Mg-Ca alloys through microstructural refinement by indirect extrusion. Corros. Sci., 2014, 82, 392.

[28] Zhang YJ, Yan CW, Wang FH, Li WF. Electrochemical behavior of anodized Mg alloy AZ91D in chloride containing aqueous solution. Corros. Sci., 2005, 47(11): 2816.

[29] S.Q. Yin, W.C. Duan, W.H. Liu, L. Wu, J.X. Bao, J.M. Yu, L. Li, Z. Zhao, J.Z. Cui, and Z.Q. Zhang, Improving the corrosion resistance of MgZn_1.2Gd_xZr_0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions, Corros. Sci., 177(2020), art. No. 108962.

[30] Liu J, Yang LX, Zhang CY, Zhang B, Zhang T, Li Y, Wu KM, Wang FH. Role of the LPSO structure in the improvement of corrosion resistance of Mg-Gd-Zn-Zr alloys. J. Alloys Compd., 2019, 782, 648.

[31] Zeng RC, Sun L, Zheng YF, Cui HZ, Han EH. Corrosion and characterisation of dual phase Mg-Li-Ca alloy in Hank’s solution: The influence of microstructural features. Corros. Sci., 2014, 79, 69.

[32] Li D. Electrochemical Principle, 2008, 3rd ed. Beijing, Beijing University of Aeronautics and Astronautics Press

[33] Liu XB, Shan DY, Song YW, Chen RS, Han EH. Influences of the quantity of Mg₂Sn phase on the corrosion behavior of Mg-7Sn magnesium alloy. Electrochim. Acta, 2011, 56(5): 2582.

[34] Jiang WY, Wang JF, Zhao WK, Liu QS, Jiang DM, Guo SF. Effect of Sn addition on the mechanical properties and bio-corrosion behavior of cytocompatible Mg-4Zn based alloys. J. Magnes. Alloys, 2019, 7(1): 15.

[35] Metalnikov P, Ben-Hamu G, Eliezer D, Shin KS. Role of Sn in microstructure and corrosion behavior of new wrought Mg-5Al alloy. J. Alloys Compd., 2019, 777, 835.

[36] Ha HY, Kang JY, Yang J, Yim CD, You BS. Role of Sn in corrosion and passive behavior of extruded Mg-5 wt%Sn alloy. Corros. Sci., 2016, 102, 355.

[37] J.Y. Zhang, B. Jiang, Q.S. Yang, D. Huang, A.T. Tang, F.S. Pan, and Q.Y. Han, Role of second phases on the corrosion resistance of Mg-Nd-Zr alloys, J. Alloys Compd., 849(2020), art. No. 156619.

[38] Peng X, Xu SH, Ding DH, Liao GL, Wu GH, Liu WC, Ding WJ. Microstructural evolution, mechanical properties and corrosion behavior of as-cast Mg-5Li-3Al-2Zn alloy with different Sn and Y addition. J. Mater. Sci. Technol., 2021, 72, 16.

[39] Moon S, Nam Y. Anodic oxidation of Mg-Sn alloys in alkaline solutions. Corros. Sci., 2012, 65, 494.