Effects of SiO₂ on the preparation and metallurgical properties of acid oxidized pellets

Abstract

The effects of SiO₂ content on the preparation process and metallurgical properties of acid oxidized pellets, including compressive strength, reduction, and softening—melting behaviors, were systematically investigated. Mineralogical structures, elemental distribution, and pore size distribution were varied to analyze the mechanism of the effects. The results show that with an increase in SiO₂ content from 3.51wt% to 7.18wt%, compressive strength decreases from 3150 N/pellet to 2100 N/pellet and reducibility decreases from 76.5% to 71.4%. The micro-structure showed that pellets with high SiO₂ content contained more magnetite in the mineralogical structures. Additionally, some liquid phases appeared, which hindered the continuous crystallization of hematite. Also, the softening—melting properties of the pellets clearly deteriorated as the SiO₂ content increased. With increasing SiO₂ content, the temperature range of the softening—melting zone decreased, and the maximum differential pressure and the comprehensive permeability index increased significantly. When acid oxidized pellets are used as the raw materials for blast furnace smelting, it should be combined with high basicity sinters to improve the softening—melting behaviors of the comprehensive charge.

Keywords

acid oxidized pellets / SiO₂ content / metallurgical property / mineralogical structure

References

[1] Chen YG, Guo ZC, Wang Z. Influence of CeO₂ on NO_x emission during iron ore sintering. Fuel Process. Technol., 2009, 90(7–8): 933.

[2] Yang CC, Zhu DQ, Pan J. Some basic properties of granules from ore blends consisting of ultrafine magnetite and hematite ores. Int. J. Miner. Metall. Mater., 2019, 26(8): 953.

[3] Zhou H, Zhou MX, Liu ZH, Cheng M, Chen JZ. Modeling NO_x emission of coke combustion in ore sintering process and its experimental validation. Fuel, 2016, 179, 322.

[4] Zhou H, Liu ZH, Cheng M, Zhou MX, Liu RP. Influence of coke combustion on NO_x emission during iron ore sintering. Energy Fuels, 2015, 29(2): 974.

[5] Kotta AB, Patra A, Kumar M, Karak SK. Effect of molasses binder on the physical and mechanical properties of iron ore pellets. Int. J. Miner. Metall. Mater., 2019, 26(1): 41.

[6] Ooi TC, Thompson D, Anderson DR, Fisher R, Fray T, Zandi M. The effect of charcoal combustion on iron-ore sintering performance and emission of persistent organic pollutants. Combust. Flame, 2011, 158(5): 979.

[7] Lv W, Sun ZQ, Su ZJ. Life cycle energy consumption and greenhouse gas emissions of iron pelletizing process in China, a case study. J. Cleaner Prod., 2019, 233, 1314.

[8] Zhang HQ, Fu JT. Oxidation behavior of artificial magnetite pellets. Int. J. Miner. Metall. Mater., 2017, 24(6): 603.

[9] Huang XX, Fan XH, Chen XL, Gan M, Ji ZY, Zheng RY. A novel blending principle and optimization model for low-carbon and low-cost sintering in ironmaking process. Powder Technol., 2019, 355, 629.

[10] Yang TJ, Zhang JL, Guo HW. Realizing low carbon ironmaking with low consumption, low emission and high efficiency under the guidance of scientific development concept. Ironmaking, 2012, 31(4): 1

[11] Gao QJ, Jiang X, Wei G, Shen FM. Effects of MgO on densification and consolidation of oxidized pellets. J. Cent. South Univ., 2014, 21, 877.

[12] Gao QJ, Shen FM, Wei G, Jiang X, Zheng HY. Effects of MgO containing additive on low-temperature metallurgical properties of oxidized pellet. J. Iron Steel Res. Int., 2013, 20(7): 25.

[13] Gao QJ, Shen YS, Jiang X, Zheng HY, Shen FM, Liu CS. Effect of MgO on oxidation process of Fe₃O₄ in pellets. J. Iron Steel Res. Int., 2016, 23(10): 1007.

[14] Huang ZC, Han ZG, Zhou JW, Jiang T, Yang XP. Influence of MgO on microstructure of fine magnetite concentrate based sinter. Iron Steel, 2005, 40(9): 16

[15] Zhu DQ, Gao ZF, Pan J, Chun TJ, Yang CC. Influence of pellet basicity and MgO content on roasting and metallurgical properties of pellets. J. Cent. South Univ. Sci. Technol., 2013, 44(10): 3963

[16] Gao QJ, Wei G, He YB, Shen FM. Effect of MgO on compressive strength of pellet. J. Northeast. Univ. Nat. Sci., 2013, 34(1): 103

[17] Gao QJ, Shen FM, Jiang X, Wei G, Zheng HY. Gassolid reduction kinetic model of MgO-fluxed pellets. Int. J. Miner. Metall. Mater., 2014, 21(1): 12.

[18] Umadevi T, Kumar P, Lobo NF, Prabhu M, Mahapatra PC, Ranjan M. Influence of pellet basicity (CaO/SiO₂) on iron ore pellet properties and microstructure. ISIJ Int., 2011, 51(1): 14.

[19] Zhu DQ, Chun TJ, Pan J, Zhang JL. Influence of basicity and MgO content on metallurgical performances of Brazilian specularite pellets. Int. J. Miner. Process., 2013, 125, 51.

[20] Fan XH, Xie LB, Gan M, Chen XL, Yuan LS. Roasting characteristics of magnesium pellets and mechanism of strengthening concretion. J. Cent. South Univ. Sci. Technol., 2013, 44(2): 449

[21] Fan XH, Gan M, Jiang T, Yuan LS, Chen XL. Influence of flux additives on iron ore oxidized pellets. J. Cent. South Univ., 2010, 17(4): 732.

[22] Cai XF, Tian TL. Effect of basicity on strength high magnesia basicity pellet. Multipurpose Util. Miner. Resour., 2014, 4, 48

[23] Dwarapudi S, Ghosh TK, Shankar A, Tathavadkar V V, Bhattacharjee D, Venugopal R. Effect of pellet basicity and MgO content on the quality and microstructure of hematite pellets. Int. J. Miner. Process., 2011, 99(1–4): 43.

[24] Li J, Han CC, Yang AM, Liu WX, Zhang YZ, Liu LJ. Effect of SiO₂ on quality of magnesian acid pellets. J. Iron Steel Res., 2017, 29(11): 872

[25] Lan CC, Zhang SH, Liu XJ, Lyu Q, Jiang MF. Change and mechanism analysis of the softening-melting behavior of the iron-bearing burden in a hydrogen-rich blast furnace. Int. J. Hydrogen Energy, 2020, 45(28): 14255.

[26] Tang J, Chu MS, Feng C, Li F, Liu ZG. Phases transition and consolidation mechanism of high chromium vanadium-titanium magnetite pellet by oxidation process. High Temp. Mater. Processes, 2016, 35(7): 729.

[27] Papacek H. Quality aspects in pellettising of iron ores. Steel Technol. Int., 1993, 25(7): 227

[28] Chen YM, Li J. Crystal rule of Fe₂O₃ in oxidized pellet. J. Cent. South Univ. Sci. Technol., 2007, 38(1): 70

[29] Zhang YP, Fu JY, Jiang T, Yang YB. The Influence of gangue contents on properties of pellet. Sintering Pelletizing, 2002, 27(4): 11