Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi

Abstract

New refractory high-entropy alloys, CrHfNbTaTi and CrHfMoTaTi, derived from the well-known HfNbTaTiZr alloy through principal element substitution were prepared using vacuum arc melting. The phase components, microstructures, and compressive properties of the alloys in the as-cast state were investigated. Results showed that both alloys were composed of BCC and cubic Laves phases. In terms of mechanical properties, the yield strength increased remarkably from 926 MPa for HfNbTaTiZr to 1258 MPa for CrHfNbTaTi, whereas a promising plastic strain of around 15.0% was retained in CrHfNbTaTi. The morphology and composition of the network-shaped interdendritic regions were closely related to the improved mechanical properties due to elemental substitution. Dendrites were surrounded by an incompact interdendritic shell after Mo incorporation, which deteriorated yield strength and accelerated brittleness.

Keywords

refractory / high-entropy alloys / phase structure / microstructure / yield strength / plastic strain

References

[1] Lin CM, Juan CC, Chang CH, Tsai CW, Yeh JW. Effect of Al addition on mechanical properties and microstructure of refractory Al _xHfNbTaTiZr alloys. J. Alloys Compd., 2015, 624, 100.

[2] Pollock TM, Tin S. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties. J. Propul. Power., 2006, 22(2): 361.

[3] Karaköse E, Keskin M. Microstructure evolution and mechanical properties of intermetallic Ni-xSi (x = 5, 10, 15, 20) alloys. J. Alloys Compd., 2012, 528, 63.

[4] Guo NN, Wang L, Luo LS, Li XZ, Su YQ, Guo JJ, Fu HZ. Microstructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy. Mater. Des., 2015, 81, 87.

[5] Miracle DB. High entropy alloys as a bold step forward in alloy development. Nat. Commun., 2019, 10(1): 1805.

[6] Yeh JW, Chen SK, Lin SJ, Gan JY, Chin TS, Shun TT, Tsau CH, Chang SY. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv. Eng. Mater., 2004, 6(5): 299.

[7] Cantor B, Chang ITH, Knight P, Vincent AJB. Microstructural development in equiatomic multicomponent alloys. Mater. Sci. Eng. A, 2004, 375-377, 213.

[8] Senkov ON, Wilks GB, Miracle DB, Chuang CP, Liaw PK. Refractory high-entropy alloys. Intermetallics, 2010, 18(9): 1758.

[9] Senkov ON, Wilks GB, Scott JM, Miracle DB. Mechanical properties of Nb₂₅Mo₂₅Ta₂₅W₂₅ and V₂₀Nb₂₀Mo₂₀Ta₂₀W₂₀ refractory high entropy alloys. Intermetallics, 2011, 19(5): 698.

[10] Senkov ON, Pilchak AL, Semiatin SL. Effect of cold deformation and annealing on the microstructure and tensile properties of a HfNbTaTiZr refractory high entropy alloy. Metall. Mater. Trans. A., 2018, 49(7): 2876.

[11] Eleti RR, Bhattacharjee T, Shibata A, Tsuji N. Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy. Acta. Mater., 2019, 171, 132.

[12] Bhandari U, Zhang CY, Guo SM, Yang SZ. First-principles study on the mechanical and thermodynamic properties of MoNbTaTiW. Int. J. Miner. Metall. Mater., 2020, 27(10): 1398.

[13] Xing QW, Ma J, Zhang Y. Phase thermal stability and mechanical properties analyses of (Cr,Fe,V)—(Ta,W) multiple-based elemental system using a compositional gradient film. Int. J. Miner. Metall. Mater., 2020, 27(10): 1398.

[14] Huang TD, Wu SY, Jiang H, Lu YP, Wang TM, Li TJ. Effect of Ti content on microstructure and properties of Ti_xZrVNb refractory high-entropy alloys. Int. J. Miner. Metall. Mater., 2020, 27(10): 1318.

[15] Chen SY, Tseng KK, Tong Y, Li WD, Tsai CW, Yeh JW, Liaw PK. Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy. J. Alloys Compel., 2019, 795, 19.

[16] Senkov ON, Senkova SV, Woodward C. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys. Acta. Mater., 2014, 68, 214.

[17] Fazakas É, Zadorozhnyy V, Varga LK, Inoue A, Louzguine-Luzgin DV, Tian FY, Vitos L. Experimental and theoretical study of Ti₂₀Zr₂₀Hf₂₀Nb₂₀X₂₀ (X = V or Cr) refractory high-entropy alloys. Int. J. Refract. Met. Hard Mater., 2014, 47, 131.

[18] Miracle DB, Senkov ON. A critical review of high entropy alloys and related concepts. Acta Mater., 2017, 122, 448.

[19] Senkov ON, Scott JM, Senkova SV, Miracle DB, Woodward CF. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy. J. Alloys Compd., 2011, 509(20): 6043.

[20] Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater., 2000, 48(1): 279.

[21] Senkov ON, Woodward CF. Microstructure and properties of a refractory NbCrMo_0.5Ta_0.5TiZr alloy. Mater. Sci. Eng. A, 2011, 529, 311.

[22] Chiang J, Lawrence B, Boyd JD, Pilkey AK. Effect of microstructure on retained austenite stability and work hardening of trip steels. Mater. Sci. Eng. A, 2011, 528(13–14): 4516.

[23] Liu S, Xiong Z, Guo H, Shang C, Misra RDK. The significance of multi-step partitioning: Processing-structure-property relationship in governing high strength-high ductility combination in medium-manganese steels. Acta Mater., 2017, 124, 159.

[24] Senkov ON, Senkova SV, Miracle DB, Woodward C. Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system. Mater. Sci. Eng. A, 2013, 565, 51.

[25] Juan CC, Tsai MH, Tsai CW, Lin CM, Wang WR, Yang CC, Chen SK, Lin SJ, Yeh JW. Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys. Intermetallics, 2015, 62, 76.

[26] Chen S, Yang X, Dahmen K, Liaw P, Zhang Y. Microstructures and crackling noise of Al _xNbTiMoV high entropy alloys. Entropy, 2014, 16(2): 870.