Changes in underflow solid fraction and yield stress in paste thickeners by circulation

Abstract

The trouble-free and efficient operation of paste thickeners requires an optimal design and the cooperation of each component. When underflow discharging is suspended, alleviating the vast torque that the remaining solids within the thickeners may place on rakes mainly lies in the circulation unit. The mechanism of this unit was analyzed, and a mathematical model was developed to describe the changes in underflow solid content and yield stress. The key parameters of the circulation unit, namely, the height and flow rate, were varied to test its performance in the experiments with a self-designed laboratorial thickening system. Results show that the circulation unit is valid in reducing underflow solid fraction and yield stress to a reasonable extent, and the model could be used to describe its efficiency at different heights and flow rates. A suitable design and application of the circulation unit contributes to a cost-effective operation of paste thickeners.

Keywords

paste thickener / circulation unit / solids content / yield stress / rake failure

References

[1] Pan SC, Lin CC, Tseng DH. Reusing sewage sludge ash as adsorbent for copper removal from wastewater. Resour. Conserv. Recycl., 2003, 39(1): 79.

[2] Concha F, Bürger R. Thickening in the 20th century: A historical perspective. Min. Metall. Explor., 2003, 20(2): 57.

[3] H.Z. Jiao, S.F. Wang, Y.X. Yang, and X.M. Chen, Water recovery improvement by shearing of gravity-thickened tailings for cemented paste backfill, J. Cleaner Prod., 245(2020), art. No. 118882.

[4] Wang DL, Zhang QL, Chen QS, Qi CC, Feng Y, Xiao CC. Temperature variation characteristics in flocculation settlement of tailings and its mechanism. Int. J. Miner. Metall. Mater., 2020, 27(11): 1438.

[5] Benzaazoua M, Ouellet J, Servant S, Newman P, Verburg R. Cementitious backfill with high sulfur content physical, chemical, and mineralogical characterization. Cem. Concr. Res., 1999, 29(5): 719.

[6] Fall M, Benzaazoua M. Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization. Cem. Concr. Res., 2005, 35(2): 301.

[7] Benzaazoua M, Marion P, Picquet I, Bussière B. The use of pastefill as a solidification and stabilization process for the control of acid mine drainage. Miner. Eng., 2004, 17(2): 233.

[8] Wu AX, Yang Y, Cheng HY, Chen SM, Han Y. Status and prospects of paste technology in China. Chin. J. Eng., 2018, 40(5): 517.

[9] Yang YX, Zhao TQ, Jiao HZ, Wang YF, Li HY. Potential effect of porosity evolution of cemented paste backfill on selective solidification of heavy metal ions. Int. J. Environ. Res. Public Health, 2020, 17(3): 814.

[10] Benzaazoua M, Fall M, Belem T. A contribution to understanding the hardening process of cemented pastefill. Miner. Eng., 2004, 17(2): 141.

[11] Pokharel M, Fall M. Combined influence of sulphate and temperature on the saturated hydraulic conductivity of hardened cemented paste backfill. Cem. Concr. Compos., 2013, 38, 21.

[12] Jiao HZ, Wang SF, Wu AX, Shen HM, Wang JD. Cementitious property of NaAlO₂-activated Ge slag as cement supplement. Int. J. Miner. Metall. Mater, 2019, 26(12): 1594.

[13] C.C. Qi and A. Fourie, Cemented paste backfill for mineral tailings management: Review and future perspectives, Miner. Eng., 144(2019), art. No. 106025.

[14] Zhao X, Fourie A, Qi CC. Mechanics and safety issues in tailing-based backfill: A review. Int. J. Miner. Metall. Mater., 2020, 27(9): 1165.

[15] Boger DV. Rheology and the resource industries. Chem. Eng. Sci., 2009, 64(22): 4525.

[16] Usher SP. Suspension Dewatering: Characterisation and Optimisation, 2002, Victoria, University of Melbourne, 20.

[17] Belem T, Benzaazoua M. Design and application of underground mine paste backfill technology. Geotech. Geol. Eng, 2008, 26(2): 147.

[18] Meggyes T, Debreczeni A. Paste technology for tailings management. Land Contam. Reclam., 2006, 14(4): 815.

[19] R.J. Jewell and A.B. Fourie, Paste and Thickened Tailings—A Guide, 3rd ed, Australian Centre for Geomechanics, Western Australia, 2015.

[20] Mulligan MC, Bradford L. Soluble metal recovery improvement using high density thickeners in a CCD circuit: Ruashi II case study. J. South Afr. Inst. Min. Metall., 2009, 109(11): 665.

[21] Brackebusch FW. Basics of paste backfill systems. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 1995, 32(3): 122A.

[22] Usher SP, Scales PJ. Steady state thickener modelling from the compressive yield stress and hindered settling function. Chem. Eng. J., 2005, 111(2–3): 253.

[23] Wang Y, Wu AX, Ruan ZE, Wang ZH, Wei ZS, Yang GF, Wang YM. Reconstructed rheometer for direct monitoring of dewatering performance and torque in tailings thickening process. Int. J. Miner. Metall. Mater., 2020, 27(11): 1430-1437.

[24] Landman KA, White LR, Buscall R. The continuous-flow gravity thickener: Steady state behavior. AIChE J, 1988, 34(2): 239.

[25] Wang HJ, Zhou X, Wu AX, Wang YM, Yang LH. Mathematical model and factors of paste thickener rake torque. Chin. J. Eng., 2018, 40(6): 673.

[26] Jiao HZ. Research on the Tailings Flocs Behavior and Dewatering Mechanism in Deep Cone Thickening, 2014, Beijing, University of Science and Technology Beijing, 67.

[27] Rudman M, Paterson DA, Simic K. Efficiency of raking in gravity thickeners. Int. J. Miner. Process., 2010, 95(1–4): 30.

[28] Rudman M, Simic K, Paterson DA, Strode P, Brent A, Šutalo ID. Raking in gravity thickeners. Int. J. Miner. Process., 2008, 86(1–4): 114.

[29] Tan CK, Bao J, Bickert G. A study on model predictive control in paste thickeners with rake torque constraint. Miner. Eng., 2017, 105, 52.

[30] Yang LH, Wang HJ, Wu AX, Zhang LF, Chen H. Regulation and a mathematical model of underflow in paste thickeners based on a circular system design. Chin. J. Eng., 2017, 39(10): 1507.

[31] Usher SP, Spehar R, Scales PJ. Theoretical analysis of aggregate densification: Impact on thickener performance. Chem. Eng. J., 2009, 151(1–3): 202.

[32] Eckert WF, Masliyah JH, Gray MR, Fedorak PM. Prediction of sedimentation and consolidation of fine tails. AIChE J., 1996, 42(4): 960.

[33] Azam S, Jeeravipoolvarn S, Scott JD. Numerical modeling of tailings thickening for improved mine waste management. J. Environ. Inf., 2009, 13(2): 111.

[34] Jiao HZ, Wu AX, Wang HJ, Zhong SP, Ruan RM, Yin SH. The solids concentration distribution in the deep cone thickener: A pilot scale test. Korean J. Chem. Eng, 2013, 30(2): 262.

[35] Gawu SK, Fourie AB. Assessment of the modified slump test as a measure of the yield stress of high-density thickened tailings. Can. Geotech. J., 2004, 41(1): 39.

[36] Nguyen QD, Boger DV. Application of rheology to solving tailings disposal problems. Int. J. Miner. Process., 1998, 54(3–4): 217.

[37] Kesimal A, Yilmaz E, Ercikdi B. Evaluation of paste backfill mixtures consisting of sulphide-rich mill tailings and varying cement contents. Cem. Concr. Res, 2004, 34(10): 1817.

[38] Cheng HY, Wu SC, Wu AX, Cheng WH. Grading characterization and yield stress prediction based on paste stability coefficient. Chin. J. Eng., 2018, 40(10): 1168.

[39] Kesimal A, Yilmaz E, Ercikdi B, Alp I, Deveci H. Effect of properties of tailings and binder on the short-and long-term strength and stability of cemented paste backfill. Mater. Lett., 2005, 59(28): 3703.

[40] Terzaghi K, Peck RB, Mesri G. Soil Mechanics in Engineering Practice, 1995, 3rd ed., New York, John Wiley & Sons, Inc.

[41] Farrow JB, Johnston RRM, Simic K, Swift JD. Consolidation and aggregate densification during gravity thickening. Chem. Eng. J., 2000, 80(1–3): 141.

[42] Dzuy NQ, Boger DV. Yield stress measurement for concentrated suspensions. J. Rheol., 1983, 27(4): 321.

[43] H.Y. Cheng, S.C. Wu, H. Li, and X.Q. Zhang, Influence of time and temperature on rheology and flow performance of cemented paste backfill, Constr. Build. Mater., 231(2020), art. No. 117117.

[44] Zhou X, Jin XG, Liu PZ, Wu HP, Li HW. Prediction model for underflow concentration of deep cone thickener based on dynamic thickening experimentation. Met. Mine, 2017, 12, 39.

[45] Jin X. Experimental study on influence factors on rheological properties of underflow in deep-cone thickeners. Mod. Min., 2015, 31(3): 201.

[46] Zhang MH, Ferraris CF, Zhu H, Picandet V, Peltz MA, Stutzman P, Kee DD. Measurement of yield stress for concentrated suspensions using a plate device. Mater. Struct., 2010, 43(1–2): 47.

[47] Wallevik JE. Relationship between the Bingham parameters and slump. Cem. Concr. Res., 2006, 36(7): 1214.

[48] Wang S, Song XP, Wang XJ, Chen QS, Qin JC, Ke YX. Influence of coarse tailings on flocculation settlement. Int. J. Miner. Metall. Mater., 2020, 27(8): 1065.