Process—structure—property relationship for plasma-sprayed iron-based amorphous/crystalline composite coatings

Abstract

This study explores the fabrication of Fe-based amorphous/crystalline coating by air plasma spraying and its dependency on the coating parameters (plasma power, primary gas flow rate, powder feed rate, and stand-off distance). X-ray diffraction of the coatings deposited at optimized spray parameters showed the presence of amorphous/crystalline phase. Coatings deposited at a lower plasma power and highest gas flow rate exhibited better density, hardness, and wear resistance. All coatings demonstrated equally good resistance against the corrosive environment (3.5wt% NaCl solution). Mechanical, wear, and tribological studies indicated that a single process parameter optimization cannot provide good coating performance; instead, all process parameters have a unique role in defining better properties for the coating by controlling the in-flight particle temperature and velocity profile, followed by the cooling pattern of molten droplet before impingement on the substrate.

Keywords

Fe-based alloys / amorphous alloys / plasma spray coating / mechanical / corrosion and wear

References

[1] Greer AL. Metallic glasses. Science, 1995, 267(5206): 1947.

[2] Ashby MF, Greer AL. Metallic glasses as structural materials. Scripta Mater., 2006, 54(3): 321.

[3] Miracle DB. A structural model for metallic glasses. Nat. Mater., 2004, 3(10): 697.

[4] Ponnambalam V, Poon SJ, Shiflet GJ, Keppens VM, Taylor R, Petculescu G. Synthesis of iron-based bulk metallic glasses as nonferromagnetic amorphous steel alloys. Appl. Phys. Lett., 2003, 83(6): 1131.

[5] Suryanarayana C, Inoue A. Iron-based bulk metallic glasses. Int. Mater. Rev., 2013, 58(3): 131.

[6] Gu XJ, Poon SJ, Shiflet GJ. Mechanical properties of iron-based bulk metallic glasses. J. Mater. Res., 2007, 22(2): 344.

[7] Sun BA, Wang WH. The fracture of bulk metallic glasses. Prog. Mater. Sci., 2015, 74, 211.

[8] Li YC, Zhang C, Xing W, Guo SF, Liu L. Design of Fe-based bulk metallic glasses with improved wear resistance. ACS Appl. Mater. Interfaces, 2018, 10(49): 43144.

[9] Kumar A, Kumar R, Bijalwan P, Dutta M, Banerjee A, Laha T. Fe-based amorphous/nanocrystalline composite coating by plasma spraying: Effect of heat input on morphology, phase evolution and mechanical properties. J. Alloys Compd., 2019, 771, 827.

[10] Pan J, Chen Q, Li N, Liu L. Formation of centimeter Fe-based bulk metallic glasses in low vacuum environment. J. Alloys Compd., 2008, 463(1–2): 246.

[11] Chen QJ, Guo SB, Yang XJ, Zhou XL, Hua XZ, Zhu XH, Duan Z. Study on corrosion resistance of Fe-based amorphous coating by laser cladding in hydrochloric acid. Phys. Procedia, 2013, 50, 297.

[12] Inoue A, Kong FL, Man QK, Shen BL, Li RW, Al-Marzouki F. Development and applications of Fe- and Co-based bulk glassy alloys and their prospects. J. Alloys Compd., 2014, 615, S2.

[13] Sort J, Ile DC, Zhilyaev AP, Concustell A, Czeppe T, Stoica M, Suriñach S, Eckert J, Baró MD. Cold-consolidation of ball-milled Fe-based amorphous ribbons by high pressure torsion. Scripta Mater., 2004, 50(9): 1221.

[14] J. Shen, Q.J. Chen, J.F. Sun, H.B. Fan, and G. Wang, Exceptionally high glass-forming ability of an FeCoCrMoCBY alloy, Appl. Phys. Lett., 86(2005), No. 15, art. No. 151907.

[15] Li HX, Lu ZC, Wang SL, Wu Y, Lu ZP. Fe-based bulk metallic glasses: Glass formation, fabrication, properties and applications. Prog. Mater. Sci., 2019, 103, 235.

[16] Zhou Z, Wang L, He DY, Wang FC, Liu YB. Microstructure and electrochemical behavior of Fe-based amorphous metallic coatings fabricated by atmospheric plasma spraying. J. Therm. Spray Technol., 2011, 20(1–2): 344.

[17] Kumar S, Kim J, Kim H, Lee C. Phase dependence of Fe-based bulk metallic glasses on properties of thermal spray coatings. J. Alloys Compd., 2009, 475(1–2): L9.

[18] Zhang C, Liu L, Chan KC, Chen Q, Tang CY. Wear behavior of HVOF-sprayed Fe-based amorphous coatings. Intermetallics, 2012, 29, 80.

[19] Fauchais P. Understanding plasma spraying. J. Phys. D: Appl. Phys., 2004, 37(9): R86.

[20] Guo RQ, Zhang C, Chen Q, Yang Y, Li N, Liu L. Study of structure and corrosion resistance of Fe-based amorphous coatings prepared by HVAF and HVOF. Corros. Sci., 2011, 53(7): 2351.

[21] Koga GY, Schulz R, Savoie S, Nascimento ARC, Drolet Y, Bolfarini C, Kiminami CS, Botta WJ. Microstructure and wear behavior of Fe-based amorphous HVOF coatings produced from commercial precursors. Surf. Coat. Technol., 2017, 309, 938.

[22] Zhang CY, Chu ZH, Wei FS, Qin WJ, Yang Y, Dong YC, Huang D, Wang L. Optimizing process and the properties of the sprayed Fe-based metallic glassy coating by plasma spraying. Surf. Coat. Technol., 2017, 319, 1.

[23] Xing YZ, Liu Z, Wang G, Li XH, Jiang CP, Chen YN, Zhang Y, Song XD, Dargusch M. Improvement of interfacial bonding between plasma-sprayed cast iron splat and aluminum substrate through preheating substrate. Surf. Coat. Technol., 2017, 316, 190.

[24] P. Bijalwan, K.K. Pandey, B. Mukherjee, A. Islam, A. Pathak, M. Dutta, and A.K. Keshri, Tailoring the bimodal zone in plasma sprayed CNT reinforced YSZ coating and its impact on mechanical and tribological properties, Surf. Coat. Technol., 377(2019), art. No. 124870.

[25] Maurya RS, Sahu A, Laha T. Quantitative phase analysis in Al₈₆Ni₈Y₆ bulk glassy alloy synthesized by consolidating mechanically alloyed amorphous powder via spark plasma sintering. Mater. Des., 2016, 93, 96.

[26] Khandanjou S, Ghoranneviss M, Saviz S. The investigation of the microstructure behavior of the spray distances and argon gas flow rates effects on the aluminum coating using self-generated atmospheric plasma spray system. J. Theor. Appl. Phys., 2017, 11(3): 225.

[27] Sahab ARM, Saad NH, Kasolang S, Saedon J. Impact of plasma spray variables parameters on mechanical and wear behaviour of plasma sprayed Al₂O₃ 3%wt TiO₂ coating in abrasion and erosion application. Procedia Eng., 2012, 41, 1689.

[28] Moore MA, King FS. Abrasive wear of brittle solids. Wear, 1980, 60(1): 123.

[29] Ranjan S, Mukherjee B, Islam A, Pandey KK, Gupta R, Keshri AK. Microstructure, mechanical and high temperature tribological behaviour of graphene nanoplatelets reinforced plasma sprayed titanium nitride coating. J. Eur. Ceram. Soc., 2020, 40(3): 660.

[30] Fontana MG. Corrosion Engineering, 1986, 3rd ed., New York, McGraw Hill Book Co

[31] Souza CAC, Ribeiro DV, Kiminami CS. Corrosion resistance of Fe-Cr-based amorphous alloys: An overview. J. Non Cryst. Solids, 2016, 442, 56.