Microstructure evolution and mechanical properties of Mg-9Al-1Si-1SiC composites processed by multi-pass equal-channel angular pressing at various temperatures

Abstract

In this study, Mg-9Al-1Si-1SiC (wt%) composites were processed by multi-pass equal-channel angular pressing (ECAP) at various temperatures, and their microstructure evolution and strengthening mechanism were explored. Results showed that the as-cast microstructure was composed of an α-Mg matrix, discontinuous Mg₁₇Al₁₂ phase, and Chinese script-shaped Mg₂Si phase. After solution treatment, almost all of the Mg₁₇Al₁₂ phases were dissolved into the matrix, whereas the Mg₂Si phases were not. The subsequent multi-pass ECAP at different temperatures promoted the dynamic recrystallization and uniform distribution of the Mg₁₇Al₁₂ precipitates when compared with the multipass ECAP at a constant temperature. A large number of precipitates can effectively improve the nucleation ratio of recrystallization through a particle-stimulated nucleation mechanism. In addition, the SiC nanoparticles were mainly distributed at grain boundaries, which effectively prevented dislocation movement. The excellent comprehensive mechanical properties can be attributed to grain boundary strengthening and Orowan strengthening.

Keywords

magnesium alloy / multi-temperature ECAP processing / Mg₂Si / mechanical property

References

[1] Lü YZ, Wang QD, Zeng XQ, Ding WJ, Zhai CQ, Zhu YP. Effects of rare earths on the microstructure, properties and fracture behavior of Mg-Al alloys. Mater. Sci. Eng. A, 2000, 278(1–2): 66.

[2] Liu Y, Li W, Li YY. Microstructure and mechanical properties of ZE10 magnesium alloy prepared by equal channel angular pressing. Int. J. Miner. Metall. Mater., 2009, 16(5): 559.

[3] Mirzadeh H. Constitutive behaviors of magnesium and Mg-Zn-Zr alloy during hot deformation. Mater. Chem. Phys, 2015, 152, 123.

[4] Gupta M, Wong WLE. Magnesium-based nanocomposites: Lightweight materials of the future. Mater. Charact, 2015, 105, 30.

[5] Yu DL, Zhang DF, Sun J, Luo YX, Xu JY, Zhang HJ, Pan FS. Improving mechanical properties of ZM61 magnesium alloy by aging before extrusion. J. Alloys Compd., 2017, 690, 553.

[6] Wang WH, Wang HX, Liu YM, Nie HH, Cheng WL. Effect of SiC nanoparticles addition on the microstructures and mechanical properties of ECAPed Mg9Al-1Si alloy. J. Mater. Res., 2017, 32(3): 615.

[7] S.X. Zhang, M. Li, H.X. Wang, W.L. Cheng, W.W. Lei, Y.M. Liu, and W. Liang, Microstructure and tensile properties of ECAPed Mg-9Al-1Si-1SiC composites: The influence of initial microstructures, Materials, 11(2018), No. 1, art. No. 136.

[8] Nie KB, Deng KK, Wang XJ, Gan WM, Xu FJ, Wu K, Zheng MY. Microstructures and mechanical properties of SiC_p/AZ91 magnesium matrix nanocomposites processed by multidirectional forging. J. Alloys Compd., 2015, 622, 1018.

[9] Qiao XG, Ying T, Zheng MY, Wei ED, Wu K, Hu XS, Gan WM, Brokmeier HG, Golovin IS. Microstructure evolution and mechanical properties of nano-SiC_p/AZ91 composite processed by extrusion and equal channel angular pressing (ECAP). Mater. Charact., 2016, 121, 222.

[10] Nie KB, Wang XJ, Hu XS, Xu L, Wu K, Zheng MY. Microstructure and mechanical properties of SiC nanoparticles reinforced magnesium matrix composites fabricated by ultrasonic vibration. Mater. Sci. Eng. A, 2011, 528(15): 5278.

[11] Nie KB, Wang XJ, Xu L, Wu K, Hu XS, Zheng MY. Influence of extrusion temperature and process parameter on microstructures and tensile properties of a particulate reinforced magnesium matrix nanocomposite. Mater. Des., 2012, 36, 199.

[12] Nie KB, Wang XJ, Hu XS, Wu YW, Deng KK, Wu K, Zheng MY. Effect of multidirectional forging on micro-structures and tensile properties of a particulate reinforced magnesium matrix composite. Mater. Sci. Eng. A, 2011, 528(24): 7133.

[13] Nie KB, Wang XJ, Wu K, Xu L, Zheng MY, Hu XS. Processing, microstructure and mechanical properties of magnesium matrix nanocomposites fabricated by semisolid stirring assisted ultrasonic vibration. J. Alloys Compd, 2011, 509(35): 8664.

[14] Valiev RZ, Langdon TG. Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog. Mater. Sci., 2006, 51(7): 881.

[15] J. Wei, G.H. Huang, D.D. Yin, K.N. Li, Q.D. Wang, and H. Zhou, Effects of ECAP and annealing treatment on the microstructure and mechanical properties of Mg-1Y (wt. %) binary alloy, Metals, 7(2017), No. 4, art. No. 119.

[16] Zheng MY, Qiao XG, Xu SW, Wu K, Kamado S, Kojima Y. In-situ quasicrystal-reinforced magnesium matrix composite processed by equal channel angular extrusion (ECAE). J. Mater. Sci., 2005, 40(9–10): 2587.

[17] Suh J, Victoria-Hernández J, Letzig D, Golle R, Volk W. Effect of processing route on texture and cold formability of AZ31 Mg alloy sheets processed by ECAP. Mater. Sci. Eng. A, 2016, 669, 159.

[18] Bleckmann M, Eichhorst M, Schuch M, Kreuzer W, Hammond VH, Spiller C, Meyer LW, Herzig N. The influence of selected ECAP-processing routes on the material properties of Magnesium Elektron 675. Mater. Sci. Eng. A, 2016, 660, 108.

[19] Liu H, Huang H, Yang XW, Li C, Yan JL, Jiang JH, Ma AB. Microstructure and mechanical property of a high-strength Mg-10Gd-6Y-1.5Zn-0.5Zr alloy prepared by multipass equal channel angular pressing. J. Magnesium Alloys, 2017, 5(2): 231.

[20] Liu H, Cheng ZJ, Yan K, Yan JL, Bai J, Jiang JH, Ma AB. Effect of multi-pass equal channel angular pressing on the microstructure and mechanical properties of a heterogeneous Mg₈₈Y₈Zn₄ alloy. J. Mater. Sci. Technol., 2016, 32(12): 1274.

[21] Yang ZQ, Ma AB, Liu H, Song D, Wu YN, Yuan YC, Jiang JH, Sun JP. Managing strength and ductility in AZ91 magnesium alloy through ECAP combined with prior and post aging treatment. Mater. Charact., 2019, 152, 213.

[22] Kim WJ, Hong SI, Kim YS, Min SH, Jeong HT, Lee JD. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing. Acta Mater., 2003, 51(11): 3293.

[23] Orlov D, Raab G, Lamark TT, Popov M, Estrin Y. Improvement of mechanical properties of magnesium alloy ZK60 by integrated extrusion and equal channel angular pressing. Acta Mater., 2011, 59(1): 375.

[24] Lin YC, Chen XM. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working. Mater. Des., 2011, 32(4): 1733.

[25] Yuan YC, Ma AB, Gou XF, Jiang JH, Arhin G, Song D, Liu H. Effect of heat treatment and deformation temperature on the mechanical properties of ECAP processed ZK60 magnesium alloy. Mater. Sci. Eng. A, 2016, 677, 125.

[26] Yuan T, Jiang JH, Ma AB, Wu YN, Yuan YC, Li C. Simultaneously improving the strength and ductility of an Al-5.5Mg-1.6Li-0.1Zr alloy via warm multi-pass ECAP. Mater. Charact., 2019, 151, 530.

[27] Robson JD, Henry DT, Davis B. Particle effects on recrystallization in magnesium-manganese alloys: Particle-stimulated nucleation. Acta Mater., 2009, 57(9): 2739.

[28] Yao X, Zheng YF, Quadir MZ, Kong C, Liang JM, Chen YH, Munroe P, Zhang DL. Grain growth and recrystallization behaviors of an ultrafine grained Al-0.6wt%Mg-0.4wt%Si-5vol.%SiC nanocomposite during heat treatment and extrusion. J. Alloys Compd., 2018, 745, 519.

[29] Wang ZW, Song M, Sun C, He YH. Effects of particle size and distribution on the mechanical properties of SiC reinforced Al-Cu alloy composites. Mater. Sci. Eng. A, 2011, 528(3): 1131.

[30] Jiang MG, Yan H, Chen RS. Twinning, recrystallization and texture development during multi-directional impact forging in an AZ61 Mg alloy. J. Alloys Compd., 2015, 650, 399.

[31] Chai YF, Jiang B, Song JF, Wang QH, He JJ, Zhao J, Huang GS, Jiang ZT, Pan FS. Role of Al content on the microstructure, texture and mechanical properties of Mg-3.5Ca based alloys. Mater. Sci. Eng. A, 2018, 730, 303.

[32] Yang Z, Li JP, Guo YC, Liu T, Xia F, Zeng ZW, Liang MX. Precipitation process and effect on mechanical properties of Mg-9Gd-3Y-0.6Zn-0.5Zr alloy. Mater. Sci. Eng. A, 2007, 454, 274.

[33] Deng KK, Shi JY, Wang CJ, Wang XJ, Wu YW, Nie KB, Wu K. Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite. Compos. Part A, 2012, 43(8): 1280.

[34] Cheng WL, Tian QW, Yu H, Zhang H, You BS. Strengthening mechanisms of indirect-extruded Mg-Sn based alloys at room temperature. J. Magnesiun Alloys, 2014, 2(4): 299.