Fabrication and characterization of GNPs and CNTs reinforced Al7075 matrix composites through the stir casting process

Abstract

This study investigated the effects of adding graphene nanoplates (GNPs) and carbon nanotubes (CNTs) into the Al7075 matrix via the stir casting method on the microstructure and mechanical properties of the fabricated composites. By increasing the volume fraction of reinforcements, the fraction of porosity increased. The X-ray diffraction results showed that the addition of reinforcements into the Al7075 changed the dominant crystal orientation from (002) to (111). Field emission scanning electron microscopy images also showed the distribution of clustered reinforcements in the matrix. Between the two reinforcements, the addition of CNTs generated a lower fraction of porosities. Through the addition of 0.52vol% GNPs into the matrix, the hardness, ultimate tensile strength and uniform elongation increased by 44%, 32%, and 180%, respectively. Meanwhile, the presence of 0.71vol% CNTs in the matrix increased the hardness, tensile strength and uniform elongation by 108%, 129%, and 260%, respectively.

Keywords

Al7075 / GNPs / CNTs / stir casting / composite

References

[1] Bodunrin MO, Alaneme KK, Chown LH. Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. J. Mater. Res. Technol., 2015, 4(4): 434.

[2] Harichandran R, Selvakumar N. Effect of nano/micro B₄C particles on the mechanical properties of aluminium metal matrix composites fabricated by ultrasonic cavitation-assisted solidification process. Arch. Civ. Mech. Eng., 2016, 16(1): 147.

[3] Mistry JM, Gohil PP. Experimental investigations on wear and friction behaviour of Si₃N_4p reinforced heat-treated aluminium matrix composites produced using electromagnetic stir casting process. Composites B. Eng., 2019, 161, 190.

[4] Singh A, Bala N. Fabrication and tribological behavior of stir cast Mg/B₄C metal matrix composites. Metall. Mater. Trans. A, 2017, 48(10): 5031.

[5] Thangarasu A, Murugan N, Dinaharan I, Vijay S. Synthesis and characterization of titanium carbide particulate reinforced AA6082 aluminium alloy composites via friction stir processing. Arch. Civ. Mech. Eng., 2015, 15(2): 324.

[6] Raj R, Thakur DG. Qualitative and quantitative assessment of microstructure in Al-B₄C metal matrix composite processed by modified stir casting technique. Arch. Civ. Mech. Eng., 2016, 16(4): 949.

[7] Valibeygloo N, Khosroshahi RA, Mousavian RT. Microstructural and mechanical properties of Al-4.5 wt% Cu reinforced with alumina nanoparticles by stir casting method. Int. J. Miner. Metall. Mater., 2013, 20(10): 978.

[8] Sajjadi SA, Ezatpour HR, Beygi H. Microstructure and mechanical properties of Al-Al₂O₃ micro and nano composites fabricated by stir casting. Mater. Sci. Eng. A, 2011, 528(29): 8765.

[9] Kumar UKGBAV. Method of stir casting of aluminum metal matrix composites: A review. Mater. Today: Proc., 2017, 4(2): 1140.

[10] Raei M, Panjepour M, Meratian M. Pseudo-in-situ stir casting: a new method for production of aluminum matrix composites with bimodal-sized B₄C reinforcement. Int. J. Miner. Metall. Mater, 2016, 23(8): 981.

[11] Michael Rajan HB, Ramabalan S, Dinaharan I, Vijay SJ. Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites. Mater. Des., 2013, 44, 438.

[12] Chen F, Chen ZN, Mao F, Wang TM, Cao ZQ. TiB₂ reinforced aluminum based in situ composites fabricated by stir casting. Mater. Sci. Eng. A, 2015, 625, 357.

[13] David Rajia Selvam J, Dinaharan I. In situ formation of ZrB₂ particulates and their influence on microstructure and tensile behavior of AA7075 aluminum matrix composites. Eng. Sci. Technol. Int. J., 2017, 20(1): 187.

[14] Yuan QH, Qiu ZQ, Zhou GH, Zeng XS, Luo L, Rao XX, Ding Y, Liu Y. Interfacial design and strengthening mechanisms of AZ91 alloy reinforced with in-situ reduced graphene oxide. Mater. Charact., 2018, 138, 215.

[15] Veeravalli RR, Nallu R, Mohammed Moulana Mohiuddin S. Mechanical and tribological properties of AA7075-TiC metal matrix composites under heat treated (T6) and cast conditions. J. Mater. Res. Technol., 2016, 5(4): 377.

[16] Ezatpour HR, Torabi Parizi M, Sajjadi SA, Ebrahimi GR, Chaichi A. Microstructure, mechanical analysis and optimal selection of 7075 aluminum alloy based composite reinforced with alumina nanoparticles. Mater. Chem. Phys., 2016, 178, 119.

[17] Shirvanimoghaddam K, Khayyam H, Abdizadeh H, Karbalaei Akbari M, Pakseresht AH, Abdi F, Abbasi A, Naebe M. Effect of B₄C, TiB₂ and ZrSiO₄ ceramic particles on mechanical properties of aluminium matrix composites: Experimental investigation and predictive modelling. Ceram. Int., 2016, 42(5): 6206.

[18] Amirkhanlou S, Niroumand B. Synthesis and characterization of 356-SiC_p composites by stir casting and compocasting methods. Trans. Nonferrous Met. Soc. China, 2010, 20, s788.

[19] Kalaiselvan K, Murugan N, Parameswaran S. Production and characterization of AA6061-B₄C stir cast composite. Mater. Des., 2011, 32(7): 4004.

[20] Hashim J, Looney L, Hashmi MSJ. The wettability of SiC particles by molten aluminium alloy. J. Mater. Process. Technol., 2001, 119(1–3): 324.

[21] Zhao LY, Lu HM, Gao ZJ. Microstructure and mechanical properties of Al/graphene composite produced by high - pressure torsion. Adv. Eng. Mater., 2015, 17(7): 976.

[22] Radha A, Vijayakumar KR. An investigation of mechanical and wear properties of AA6061 reinforced with silicon carbide and graphene nano particles-particulate composites. Mater. Today: Proc., 2016, 3(6): 2247.

[23] Venkatesan S, Xavior MA. Investigation of aluminum (Al7050) metal matrix composites reinforced with graphene nanoparticles using stir casting process. Int. J. Appl. Eng. Res., 2015, 10(15): 35778.

[24] A.B. Elshalakany, T.A. Osman, A. Khattab, B. Azzam, and M. Zaki, Microstructure and mechanical properties of MWCNTs reinforced A356 aluminum alloys cast nanocomposites fabricated by using a combination of rheocasting and squeeze casting techniques, J. Nanomater., 2014, No. 2014, art. No. 386370.

[25] F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Elsevier, 2017, p. 356.

[26] Afkham Y, Khosroshahi RA, Rahimpour S, Aavani C, Brabazon D, Mousavian RT. Enhanced mechanical properties of in situ aluminium matrix composites reinforced by alumina nanoparticles. Arch. Civ. Mech. Eng., 2018, 18(1): 215.

[27] Ardakani MRK, Amirkhanlou S, Khorsand S. Cross accumulative roll bonding—a novel mechanical technique for significant improvement of stir-cast Al/Al₂O₃ nanocomposite properties. Mater. Sci. Eng. A, 2014, 591, 144.

[28] Ezatpour HR, Torabi-Parizi M, Sajjadi SA. Microstructure and mechanical properties of extruded Al/Al₂O₃ composites fabricated by stir-casting process. Trans. Nonferrous. Met. Soc. China, 2013, 23(5): 1262.

[29] Kim CS, Cho K, Manjili MH, Nezafati M. Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs). J. Mater. Sci., 2017, 52(23): 13319.

[30] Sanaty-Zadeh A. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect. Mater. Sci. Eng. A, 2012, 531, 112.

[31] Baradeswaran A, Elaya Perumal A. Influence of B₄C on the tribological and mechanical properties of Al 7075-B₄C composites. Composites Part B: Eng., 2013, 54, 146.

[32] Sajjadi SA, Ezatpour HR, Torabi Parizi M. Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al₂O₃ composites fabricated by stir and compo-casting processes. Mater. Des., 2012, 34, 106.

[33] Ezatpour HR, Sajjadi SA, Sabzevar MH, Huang YZ. Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting. Mater. Des., 2014, 55, 921.

[34] Ravi Kumar K, Kiran K, Sreebalaji VS. Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide. J. Alloys Compd., 2017, 723, 795.

[35] A. Agarwal, S. R. Bakshi, and D. Lahiri, Carbon Nanotubes: Reinforced Metal Matrix Composites, CRC press, 2017.

[36] Park JG, Keum DH, Lee YH. Strengthening mechanisms in carbon nanotube-reinforced aluminum composites. Carbon, 2015, 95, 690.

[37] Yan SJ, Dai SL, Zhang XY, Yang C, Hong QH, Chen JZ, Lin ZM. Investigating aluminum alloy reinforced by graphene nanoflakes. Mater. Sci. Eng. A, 2014, 612, 440.

[38] Zhang DD, Zhan ZJ. Strengthening effect of graphene derivatives in copper matrix composites. J. Alloys Compd., 2016, 654, 226.

[39] Rashad M, Pan FS, Liu YL, Chen XH, Lin H, Pan RJ, Asif M, She J. High temperature formability of graphene nano-platelets-AZ31 composites fabricated by stir-casting method. J. Magnesium Alloys, 2016, 4(4): 270.

[40] Pazhouhanfar Y, Eghbali B. Microstructural characterization and mechanical properties of TiB₂ reinforced Al6061 matrix composites produced using stir casting process. Mater. Sci. Eng. A, 2018, 710, 172.

[41] Xu T, Li GR, Xie ML, Liu M, Zhang D, Zhao YT, Chen G, Kai XZ. Microstructure and mechanical properties of in-situ nano γ-Al₂O_3p/A356 aluminum matrix composite. J. Alloys Compd., 2019, 787, 72.