Direct preparation of semi-solid billets by the semi-solid isothermal heat treatment for commercial cold-rolled ZL104 aluminum alloy

Abstract

Semi-solid isothermal heat treatment was proposed to directly process cold-rolled ZL104 aluminum alloys and obtain semi-solid billets. The effects of two process parameters, namely, temperature and processing time, on the microstructure and hardness of the resulting billets were also experimentally examined. Average grain size (AGS) increased and the shape factor (SF) of the grain improved as the process temperature increased. The SF of the grain also increased with increasing processing time, and the AGS was augmented when the processing time was prolonged from 5 to 20 min at 570°C. The hardness of the aluminum alloy decreased because of the increase in AGS with increasing temperature and processing time. The optimal temperature and time for the preparation of semi-solid ZL104 aluminum alloys were 570°C and 5 min, respectively. Under optimal process parameters, the AGS, SF, and hardness of the resulting alloy were 35.88 µm, 0.81, and 55.24 MPa, respectively. The Lifshitz-Slyozov-Wagner relationship was analyzed to determine the coarsening rate constant at 570°C, and a rate constant of 1357.2 µm³/s was obtained.

Keywords

semi-solid / aluminum alloy / microstructure / hardness / semi-solid isothermal heat treatment

References

[1] Spencer DB, Mehrabian R, Flemings MC. Rheological behavior of Sn-15 pct Pb in the crystallization range. Metall. Mater. Trans. B, 1972, 3(7): 1925.

[2] Wang YF, Zhao SD, Zhang CY. Grain refinement of aluminum alloy bar by a modified RAP process for semi-solid forming. Mater. Trans., 2017, 58(2): 176.

[3] Wang YF, Zhao SD, Zhang CY. Microstructures and mechanical properties of semi-solid squeeze casting ZL104 connecting rod. Trans. Nonferrous Met. Soc. China, 2018, 28(2): 235.

[4] Xu Y, Chen C, Jia JB, Zhang XX, Dai HH, Yang Y. Constitutive behavior of a SIMA processed magnesium alloy by employing repetitive upsetting-extrusion (RUE). J. Alloys Compel, 2018, 748, 694.

[5] Xu Y, Hu LX, Jia JB, Xu B. Microstructure evolution of a SIMA processed AZ91D magnesium alloy based on repetitive upsetting-extrusion (RUE) process. Mater. Charact., 2016, 118, 309.

[6] Wang YF, Zhao SD, Zhang CY. Semi-solid billets prepared by radial forging strain-induced melt activation. Rare Met. Mater. Eng., 2017, 46(12): 3875.

[7] Wang YF, Zhao SD, Zhao XZ, Zhao YQ. Effects of isothermal treatment parameters on the microstructure of semisolid alloys. Mater. Sci. Technol., 2018, 34(1): 104.

[8] Jiang JF, Wang Y, Atkinson HV. Microstructural coarsening of 7005 aluminum alloy semisolid billets with high solid fraction. Mater. Charact., 2014, 90, 52.

[9] Chen ZB, Li L, Zhou RF, Jiang YH, Zhou R. Study on refining mechanism of primary Si in semi-solid Al-25%Si alloy slurry prepared by rotating-rod induced nucleation. Solid State Phenom., 2014, 217–218, 253.

[10] Jang CH, Jin CK, Bolouri A, Kang CG. Effect of forming conditions on mechanical properties of rheoformed thin plates with microchannels using electromagnetic stirring. Proc. Inst. Mech. Eng. B: J. Eng. Manuf., 2014, 228(3): 399.

[11] Wang YF, Zhao SD, Zhang CY. Microstructural evolution of semisolid 6063 aluminum alloy prepared by recrystallization and partial melting process. J. Mater. Eng. Perform., 2017, 26(9): 4354.

[12] Song YB, Park KT, Hong CP. Recrystallization behavior of 7175 Al alloy during modified strain-induced melt-activated (SIMA) process. Mater. Trans., 2006, 47(4): 1250.

[13] Jiang JF, Wang Y, Luo SJ. Application of equal channel angular extrusion to semi-solid processing of magnesium alloy. Mater. Charact., 2007, 58(2): 190.

[14] Zhao ZD, Chen Q, Tang ZJ, Hu CK. Microstructural evolution and tensile mechanical properties of AM60B magnesium alloy prepared by the SIMA route. J. Alloys Compd., 2010, 497(1–2): 402.

[15] Chen Q, Zhao ZD, Chen G, Wang B. Effect of accumulative plastic deformation on generation of spheroidal structure, thixoformability and mechanical properties of large-size AM60 magnesium alloy. J. Alloys Compd., 2015, 632, 190.

[16] Atkinson HV. Modelling the semisolid processing of metallic alloys. Prog. Mater. Sci., 2005, 50(3): 341.

[17] Orgas L, Gabathuler JP, Imwinkelried T, Paradies C, Rappaz M. Modelling of semi-solid processing using a modified temperature-dependent power-law model. Model. Simul. Mater. Sci. Eng., 2003, 11(4): 553.

[18] Wang YF, Zhao SD, Zhao XZ, Zhao YQ. Microstructural coarsening of 6061 aluminum alloy semi-solid billets prepared via recrystallization and partial melting. J. Mech. Sci. Technol., 2017, 31(8): 3917.

[19] Jiang JF, Du ZM, Wang Y, Luo SJ. Microstructural evolution of 7050 aluminum alloy semisolid billets fabricated by RAP process. Solid State Phenom., 2014, 217–218, 29.

[20] Wang YF, Zhao SD, Fan SQ, Zhao YQ. Semi-solid billet prepared by radial forging combined with unidirectional compression recrystallization and partial melting. Rare Met. Mater. Eng., 2017, 46(10): 2900.

[21] Doherty RD, Lee HI, Feest EA. Microstructure of stircast metals. Mater. Sci. Eng., 1984, 65(1): 181.

[22] Moradi M, Nili-Ahmadabadi M, Poorganji B, Heidarian B, Parsa MH, Furuhara T. Recrystallization behavior of ECAPed A356 alloy at semi-solid reheating temperature. Mater. Sci. Eng. A, 2010, 527(16–17): 4113.

[23] Mohammadi H, Ketabchi M, Kalaki A. Microstructure evolution of semi-solid 7075 aluminum alloy during reheating process. J. Mater. Eng. Perform., 2011, 20(7): 1256.

[24] Wang YF, Zhao SD, Zhang CY. Application of radial forging and remelting treatment to prepare semi-solid billet of AlMg_0.7Si alloy. Solid State Phenom., 2016, 256, 257.

[25] Yuan W, Panigrahi SK, Su JQ, Mishra RS. Influence of grain size and texture on Hall-Petch relationship for a magnesium alloy. Scripta Mater., 2011, 65(11): 994.

[26] Qi MF, Kang YL, Yan Y, Zhu GM, Liao WN. Comparison of microstructure and mechanical properties of AZ91D alloy formed by rheomolding and high-pressure die casting. J. Mater. Eng. Perform., 2015, 24(10): 3826.

[27] Liu WH, Wu Y, He JY, Nieh TG, Lu ZP. Grain growth and the Hall-Petch relationship in a high-entropy FeCr-NiCoMn alloy. Scripta Mater., 2013, 68(7): 526.

[28] Hug E, Keller C. Size effects and magnetoelastic couplings: A link between Hall-Petch behaviour and coercive field in soft ferromagnetic metals. Philos. Mag., 2019, 99(11): 1297.

[29] Jiang JF, Wang Y, Xiao GF, Nie X. Comparison of microstructural evolution of 7075 aluminum alloy fabricated by SIMA and RAP. J. Mater. Process. Technol., 2016, 238, 361.

[30] B. Binesh and M. Aghaie-Khafri, Phase evolution and mechanical behavior of the semi-solid SIMA processed 7075 aluminum alloy, Metals, 6(2016), No. 3, art. No. 42.

[31] Chen Q, Zhao ZD, Zhao ZX, Hu CK, Shu DY. Microstructure development and thixoextrusion of magnesium alloy prepared by repetitive upsetting-extrusion. J. Alloys Compd., 2011, 509(26): 7303.

[32] Binesh B, Aghaie-Khafri M. Microstructure and texture characterization of 7075 Al alloy during the SIMA process. Mater. Charact., 2015, 106, 390.

[33] Jiang FL, Zhang H, Weng SC, Fu DF. Characterization of dynamic microstructural evolution of AA7150 aluminum alloy at high strain rate during hot deformation. Trans. Nonferrous Met. Soc. China, 2016, 26(1): 51.

[34] Hu QY, Zhao HD, Li FD. Effects of manufacturing processes on microstructure and properties of Al/A356-B₄C composites. Mater. Manuf. Process., 2016, 31(10): 1292.

[35] Lü SL, Wu SS, Zhu ZM, An P, Mao YW. Effect of semi-solid processing on microstructure and mechanical properties of 5052 aluminum alloy. Trans. Nonferrous Met. Soc. China, 2010, 20, s758.