Interface microstructure and formation mechanism of ultrasonic spot welding for Al-Ti dissimilar metals

Abstract

The present study focuses on interface microstructure and joint formation. AA6061 aluminum alloy (Al) and commercial pure titanium (Ti) joints were welded by ultrasonic spot welding (USW). The welding energy was 1100–3200 J. The Al-Ti joint appearance and interface microstructure were observed mainly via optical microscopy and field emission scanning electron microscopy. Results indicated that a good joint can be achieved only with proper welding energy of 2150 J. No significant intermetallic compound (IMC) was found under all conditions. The high energy barriers of Al-Ti and difficulties in diffusion were the main reasons for the absence of IMC according to kinetic analysis. The heat input is crucial for the material plastic flow and bonding area, which plays an important role in the joint formation.

Keywords

ultrasonic spot welding / Al-Ti dissimilar material / interface / mechanism / microstructure / intermetallic compounds

References

[1] Miller WS, Zhuang L, Bottema J, Wittebrood AJ, De Smet P, Haszler A, Vieregge A. Recent development in aluminium alloys for the automotive industry. Mater. Sci. Eng. A, 2000, 280(1): 37.

[2] Tomashchuk I, Sallamand P, Cicala E, Peyre P, Grevey D. Direct keyhole laser welding of aluminum alloy AA5754 to titanium alloy Ti₆Al₄V. J. Mater. Process. Technol., 2015, 217, 96.

[3] Liu K, Li YJ, Wei SZ, Wang J. Interfacial microstructural characterization of Ti/Al joints by gas tungsten arc welding. Mater. Manuf. Processes, 2014, 29(8): 969.

[4] Shiue RK, Wu SK, Chen SY. Infrared brazing of TiAl using Al-based braze alloys. Intermetallics, 2003, 11(7): 661.

[5] Sohn WH, Bong HH, Hong SH. Microstructure and bonding mechanism of Al/Ti bonded joint using Al-10Si-1Mg filler metal. Mater. Sci. Eng. A, 2003, 355(1–2): 231.

[6] Ma ZP, Zhao WW, Yan JC, Li DC. Interfacial reaction of intermetallic compounds of ultrasonic-assisted brazed joints between dissimilar alloys of Ti₆Al₄V and Al₄Cu₁Mg. Ultrason. Sonochem., 2011, 18(5): 1062.

[7] Song ZH, Nakata K, Wu AP, Liao JS. Interfacial microstructure and mechanical property of Ti₆Al₄V/A6061 dissimilar joint by direct laser brazing without filler metal and groove. Mater. Sci. Eng. A, 2013, 560, 111.

[8] Wei SZ, Li YJ, Wang J, Liu K, Zhang PF. Microstructure and joining mechanism of Ti/Al dissimilar joint by pulsed gas metal arc welding. Int. J. Adv. Manuf. Technol., 2014, 70(8): 1137.

[9] Choi JW, Liu HH, Fujii H. Dissimilar friction stir welding of pure Ti and pure Al. Mater. Sci. Eng. A, 2018, 730, 168.

[10] X.W. Zhou, Y.H. Chen, S.H. Li, Y.D. Huang, K. Hao, and P. Peng, Friction stir spot welding-brazing of Al and hot-dip aluminized Ti alloy with Zn interlayer, Metals, 8(2018), No. 11, art. No. 922.

[11] Zhao HY, Yu MR, Jiang ZH, Zhou L, Song XG. Interfacial microstructure and mechanical properties of Al/Ti dissimilar joints fabricated via friction stir welding. J. Alloys Compd., 2019, 789, 139.

[12] Zhou L, Yu MR, Jiang ZH, Guo F, Zhao HY, Huang YX, Song XG. Influence of rotation speed on microstructure and mechanical properties of friction stir lap welded joints of AA 6061 and Ti6Al4V alloys. Metall. Mater. Trans. A, 2019, 50(2): 733.

[13] Chen YH, Liu CH, Liu GP. Study on the joining of titanium and aluminum dissimilar alloys by friction stir welding. Open Mater. Sci. J., 2011, 5(1): 256.

[14] Huang YX, Lv Z, Wan L, Shen JJ, Dos Santos JF. A new method of hybrid friction stir welding assisted by friction surfacing for joining dissimilar Ti/Al alloy. Mater. Lett., 2017, 207, 172.

[15] Mali VI, Pavliukova DV, Bataev IA, Bataev AA, Smirnov AI, Yartsev PS, Bazarkina VV. Formation of the intermetallic layers in Ti-Al multilayer composites. Adv. Mater. Res., 2011, 311–313, 236.

[16] Bataev IA, Bataev AA, Mali VI, Pavliukova DV. Structural and mechanical properties of metallic-intermetallic laminate composites produced by explosive welding and annealing. Mater. Des., 2012, 35, 225.

[17] Ni ZL, Ye FX. Ultrasonic spot welding of aluminum alloys: A review. J. Manuf. Processes, 2018, 35, 580.

[18] Kumar S, Wu CS, Padhy GK, Ding W. Application of ultrasonic vibrations in welding and metal processing: A status review. J. Manuf. Processes, 2017, 26, 295.

[19] Balle F, Magin J. Ultrasonic spot and torsion welding of aluminum to titanium alloys: Process, properties and interfacial microstructure. Phys. Procedia, 2015, 70, 846.

[20] Zhang CQ, Robson JD, Ciuca O, Prangnell PB. Microstructural characterization and mechanical properties of high power ultrasonic spot welded aluminum alloy AA6111-TiAl₆V4 dissimilar joints. Mater. Charact., 2014, 97, 83.

[21] Wang SQ, Patel VK, Bhole SD, Wen GD, Chen DL. Microstructure and mechanical properties of ultrasonic spot welded Al/Ti alloy joints. Mater. Des., 2015, 78, 33.

[22] Zhang CQ, Robson JD, Prangnell PB. Dissimilar ultrasonic spot welding of aerospace aluminum alloy AA2139 to titanium alloy TiAl₆V4. J. Mater. Process. Technol., 2016, 231, 382.

[23] Sridharan N, Wolcott P, Dapino M, Babu SS. Microstructure and texture evolution in aluminum and commercially pure titanium dissimilar welds fabricated using ultrasonic additive manufacturing. Scripta Mater., 2016, 117, 1.

[24] Shimizu S, Fujii HT, Sato YS, Kokawa H, Sriraman MR, Babu SS. Mechanism of weld formation during very-high-power ultrasonic additive manufacturing of Al alloy 6061. Acta Mater., 2014, 74, 234.

[25] Xie JF, Zhu YL, Bian FL, Liu C. Dynamic recovery and recrystallization mechanisms during ultrasonic spot welding of Al-Cu-Mg alloy. Mater. Charact., 2017, 132, 145.

[26] Deng HQ, Hu WY, Shu XL, Zhang BW. Analytic embedded-atom method approach to studying the surface segregation of Al-Mg alloys. Appl. Surf. Sci., 2004, 221(1–4): 408.

[27] Field DJ, Scamans GM, Butler EP. The high temperature oxidation of Al-4.2 wt pct Mg alloy. Metall. Trans. A, 1987, 18(4): 463.

[28] Kattner UR, Lin JC, Chang YA. Thermodynamic assessment and calculation of the Ti-Al system. Metall. Trans. A, 1992, 23(8): 2081.

[29] Patel VK, Bhole SD, Chen DL. Microstructure and mechanical properties of dissimilar welded Mg-Al joints by ultrasonic spot welding technique. Sci. Technol. Weld. Joining, 2012, 17(3): 202.

[30] Prangnell P, Haddadi F, Chen YC. Ultrasonic spot welding of aluminium to steel for automotive applications-microstructure and optimisation. Mater. Sci. Technol., 2011, 27(3): 617.

[31] Panteli A, Robson JD, Brough I, Prangnell PB. The effect of high strain rate deformation on intermetallic reaction during ultrasonic welding aluminium to magnesium. Mater. Sci. Eng. A, 2012, 556, 31.

[32] Y.J. Wang, G.J.J. Gao, and S. Ogata, Atomistic understanding of diffusion kinetics in nanocrystals from molecular dynamics simulations, Phys. Rev. B, 88(2013), No. 11, art. No. 115413.