Effect of nonmetallic inclusions on localized corrosion of spring steel

Abstract

Certain inclusions in high-strength 60Si2Mn-Cr spring steel result in poor resistance to localized corrosion. In this work, to study the effect of inclusions on the localized corrosion behavior of spring steel, accelerated corrosion tests were performed by immersing spring steel in 3wt% FeCl₃ solution for different times. The results show that severe corrosion occurred in areas of clustered CaS inclusions. Sulfide inclusions containing Ca and Mg induced the strongest localized corrosion susceptibility. For the case of (Ca,Mn,Mg)S inclusions, the ability to induce localized corrosion susceptibility is ranked as follows: MgS > CaS > MnS. Moreover, CaS, (Ca,Mn)S, and (Ca,Mn,Mg)S inclusions were mainly responsible for inducing environmental embrittlement.

Keywords

steel / localized corrosion / inclusions / accelerated corrosion tests

References

[1] Niu G, Chen YL, Wu HB, Wang X, Tang D. Corrosion behavior of high-strength spring steel for high-speed railway. Int. J. Miner. Metall. Mater., 2018, 25(5): 527.

[2] Zurnadzhy VI, Efremenko VG, Wu KM, Azarkhov AY, Chabak YG, Greshta VL, Isayev OB, Pomazkov MV. Effects of stress relief tempering on microstructure and tensile/impact behavior of quenched and partitioned commercial spring steel. Mater. Sci. Eng. A, 2019, 745, 307.

[3] Wang R, Bao YP, Li YH, Yan ZJ, Li DZ, Kang Y. Influence of metallurgical processing parameters on defects in cold-rolled steel sheet caused by inclusions. Int. J. Miner. Metall. Mater., 2019, 26(4): 440.

[4] Shi WN, Yang SF, Dong AP, Li JS. Understanding the corrosion mechanism of spring steel induced by MnS inclusions with different sizes. JOM, 2018, 70(11): 2513.

[5] Hu Y, Chen WQ, Wan CJ, Wang FJ, Han HB. Effect of deoxidation process on inclusion and fatigue performance of spring steel for automobile suspension. Metall. Mater. Trans. B, 2018, 49(2): 569.

[6] Wang R, Bao YP, Yan ZJ, Li DZ, Kang Y. Comparison between the surface defects caused by Al₂O₃ and TiN inclusions in interstitial-free steel auto sheets. Int. J. Miner. Metall. Mater., 2019, 26(2): 178.

[7] Gu C, Bao YP, Gan P, Wang M, He JS. Effect of main inclusions on crack initiation in bearing steel in the very high cycle fatigue regime. Int. J. Miner. Metall. Mater., 2018, 25(6): 623.

[8] Lyu S, Ma XD, Huang ZZ, Yao Z, Lee HG, Jiang ZH, Wang G, Zou J, Zhao BJ. Understanding the formation and evolution of oxide inclusions in Si-deoxidized spring steel. Metall. Mater. Trans. B, 2019, 50(4): 1862.

[9] Dwivedi SK, Vishwakarma M. Hydrogen embrittlement in different materials: a review. Int. J. Hydrogen Energy, 2018, 43(46): 21603.

[10] Kubota M, Suzuki T, Hirakami D, Ushioda K. Influence of hydrogen on fatigue property of suspension spring steel with artificial corrosion pit after multi-step shot peening. ISIJ Int., 2015, 55(12): 2667.

[11] Zerbst U, Madia M, Klinger C, Bettge D, Murakami Y. Defects as a root cause of fatigue failure of metallic components. III: Cavities, dents, corrosion pits, scratches. Eng. Fail. Anal., 2019, 97, 759.

[12] Shi JJ, Ming J, Liu X. Pitting corrosion resistance of a novel duplex alloy steel in alkali-activated slag extract in the presence of chloride ions. Int. J. Miner. Metall. Mater., 2017, 24(10): 1134.

[13] Ma YZ, Yang CL, Liu YJ, Yuan FS, Liang SS, Li HX, Zhang JS. Microstructure, mechanical, and corrosion properties of extruded low-alloyed Mg-xZn-0.2Ca alloys. J. Miner. Metall. Mater., 2019, 26(10): 1274.

[14] Nam TH, Kwon MS, Kim JG. Mechanism of corrosion fatigue cracking of automotive coil spring steel. Met. Mater. Int., 2015, 21(6): 1023.

[15] Komazaki S, Kobayashi K, Misawa T, Fukuzumi T. Environmental embrittlement of automobile spring steels caused by wet-dry cyclic corrosion in sodium chloride solution. Corros. Sci., 2005, 47(10): 2450.

[16] Wang LW, Xin JC, Cheng LJ, Zhao K, Sun BZ, Li JR, Wang X, Cui ZY. Influence of inclusions on initiation of pitting corrosion and stress corrosion cracking of X70 steel in near-neutral pH environment. Corros. Sci., 2019, 147, 108.

[17] Luo BW, Zhou J, Bai PP, Zheng SQ, An T, Wen XL. Comparative study on the corrosion behavior of X52. 3Cr. and 13Cr steel in an O₂-H₂O-CO₂ system: products reaction kinetics and pitting sensitivity. Int. J. Miner. Metall. Mater., 2017, 24(6): 646.

[18] Shi WN, Yang SF, Li JS. Correlation between Cr-depleted zone and local corrosion in stainless steels: a review. J. Chin. Soc. Corros. Prot., 2019, 39(4): 281.

[19] Zhou YT, Zheng SJ, Zhang B, Ma XL. Atomic scale understanding of the interaction between alloying copper and MnS inclusions in stainless steels in NaCl electrolyte. Corros. Sci., 2016, 111, 414.

[20] Liu RL, Li TS, Liu L, Cui Y, Oguzie EE, Li Y, Wang FH. Cellular automata study of the combined effects of passive film breakdown and repassivation on metastable pits on sputtered nanocrystalline stainless steel. J. Electrochem. Soc., 2019, 166, 4.

[21] Sun L, Sun YT, Liu YY, Dai NW, Li J, Jiang YM. Effect of annealing temperature on pitting behavior and microstructure evolution of hyper — duplex stainless steel 2707. Mater Corros., 2019, 70(9): 1682.

[22] Wang YF, Cheng GX, Wu W, Li Y. Role of inclusions in the pitting initiation of pipeline steel and the effect of electron irradiation in SEM. Corros. Sci., 2018, 130, 252.

[23] Feng H, Jiang ZH, Li HB, Lu PC, Zhang SC, Zhu HC, Zhang BB, Zhang T, Xu D, Chen ZG. Influence of nitrogen on corrosion behaviour of high nitrogen martensitic stainless steels manufactured by pressurized metallurgy. Corros. Sci., 2018, 144, 288.

[24] Feng H, Li HB, Wu XL, Jiang ZH, Zhao S, Zhang T, Xu DK, Zhang SC, Zhu HC, Zhang BB, Yang MX. Effect of nitrogen on corrosion behaviour of a novel high nitrogen medium-entropy alloy CrCoNiN manufactured by pressurized metallurgy. J. Mater. Sci. Technol., 2018, 34(10): 1781.

[25] Peguet L, Malki B, Baroux B. Influence of cold working on the pitting corrosion resistance of stainless steels. Corros. Sci., 2007, 49(4): 1933.

[26] Nishimoto MM, Muto IS, Sugawara Y, Hara N. Morphological characteristics of trenching around MnS inclusions in type 316 stainless steel: the role of molybdenum in pitting corrosion resistance. J. Electrochem. Soc., 2019, 166(11): C3801.

[27] Ha HY, Park CJ, Kwon HS. Effects of non-metallic inclusions on the initiation of pitting corrosion in 11% Cr ferritic stainless steel examined by micro-droplet cell. Corros. Sci., 2007, 49(3): 1266.

[28] Li YB, Liu J, Deng YD, Han XP, Hu WB, Zhong C. Ex situ characterization of metallurgical inclusions in X100 pipeline steel before and after immersion in a neutral pH bicarbonate solution. J. Alloys Compd., 2016, 673, 28.

[29] Guo D, Kwok CT, Chan SLI. Spindle speed in friction surfacing of 316L stainless steel-How it affects the microstructure hardness and pitting corrosion resistance. Surf. Coat. Technol., 2019, 361, 324.

[30] Cai GJ, Huang YR. Effects of Ce addition on grain boundary character distribution corrosion behavior and impact toughness of AISI 204Cu stainless steel. J. Mater. Eng. Perform., 2019, 28(6): 3683.

[31] Jia HX, Zhang XW, Xu JP, Sun YP, Li JX. Effect of hydrogen content and strain rate on hydrogen-induced delay cracking for hot-stamped steel. Metals, 2019, 9(7): 798.

[32] Wohlschlögel M, Steegmüller R, Schüβler A. Effect of inclusion size and distribution on the corrosion behavior of medical-device grade nitinol tubing. J. Mater. Eng. Perform., 2014, 23(7): 2635.

[33] Bai XF, Sun YH, Chen RM, Zhang YM, Cai YF. Formation and thermodynamics of CaS-bearing inclusions during Ca treatment in oil casting steels. Int. J. Miner. Metall. Mater., 2019, 26(5): 573.