Microwave-assisted reduction roasting—magnetic separation studies of two mineralogically different low-grade iron ores

Abstract

The microwave-assisted reduction behaviours of two low-grade iron ores having a similar Fe content of 49wt% but distinctly different mineralogical and liberation characteristics were studied. Their performances in terms of the iron grade and recovery as obtained from statistically designed microwave (MW) roasting followed by low-intensity magnetic separation (LIMS) experiments were compared. At respective optimum conditions, the titano-magnetite ore (O1) could yield an iron concentrate of 62.57% Fe grade and 60.01% Fe recovery, while the goethitic ore (O2) could be upgraded to a concentrate of 64.4% Fe grade and 33.3% Fe recovery. Compared with the goethitic ore, the titano-magnetite ore responded better to MW heating. The characterization studies of the feed and roasted products obtained at different power and time conditions using X-ray diffraction, optical microscopy, vibrating-sample magnetometry, and electron-probe microanalysis explain the sequential reduction in the iron oxide phases. Finally, taking advantage of the MW absorbing character of the titano-magnetite ore, a blend of the same with the goethite-rich ore at a weight ratio of 60:40 (O2: O1) was subjected to MW roasting that resulted in a concentrate of 61.57% Fe grade with a Fe recovery of 64.47%.

Keywords

microwave / reduction roasting / titano-magnetite ore / goethitic ore / magnetic separation

References

[1] Sun YS, Han YX, Gao P, Wang ZL, Ren DZ. Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation. Int. J. Miner. Metall. Mater., 2013, 20(5): 411.

[2] Wang G, Xue QG, Wang JS. Carbothermic reduction characteristics of ludwigite and boron-iron magnetic separation. Int. J. Miner. Metall. Mater., 2018, 25(9): 1000.

[3] Rath SS, Rao DS, Tripathy SK, Biswal SK. Characterization vis-á-vis utilization of blast furnace flue dust in the roast reduction of banded iron ore. Process Saf. Environ. Prot., 2018, 117, 232.

[4] Ray N, Nayak D, Dash N, Rath SS. Utilization of low-grade banded hematite jasper ores: Recovery of iron values and production of ferrosilicon. Clean Technol. Environ. Policy, 2018, 20(8): 1761.

[5] Sun YS, Li YF, Han YX, Li YJ. Migration behaviors and kinetics of phosphorus during coal-based reduction of high-phosphorus oolitic iron ore. Int. J. Miner. Metall. Mater., 2019, 26(8): 938.

[6] Koleini SMJ, Barani K. Cao WB. Microwave heating applications in mineral processing. The Development and Application of Microwave Heating, 2012, London, InTechOpen

[7] Onol K, Saridede MN. Investigation on microwave heating for direct leaching of chalcopyrite ores and concentrates. Int. J. Miner. Metall. Mater., 2013, 20(3): 228.

[8] Yuan YZ, Zhang YM, Liu T, Chen TJ. Comparison of the mechanisms of microwave roasting and conventional roasting and of their effects on vanadium extraction from stone coal. Int. J. Miner. Metall. Mater., 2015, 22(5): 476.

[9] Haque KE. Microwave energy for mineral treatment processes—A brief review. Int. J. Miner. Process., 1999, 57(1): 1.

[10] Pickles CA. Microwave heating behaviour of nickeliferous limonitic laterite ores. Miner. Eng., 2004, 17(6): 775.

[11] Zhu ZQ, Zhou J. Rapid growth of ZnO hexagonal tubes by direct microwave heating. Int. J. Miner. Metall. Mater., 2010, 17(1): 80.

[12] Pickles CA. Microwaves in extractive metallurgy: Part 1—Review of fundamentals. Miner. Eng., 2009, 22(13): 1102.

[13] Wu FF, Cao ZF, Wang S, Zhong H. Novel and green metallurgical technique of comprehensive utilization of refractory limonite ores. J. Cleaner Prod., 2018, 171, 831.

[14] Rayapudi V, Agrawal S, Dhawan N. Optimization of microwave carbothermal reduction for processing of banded hematite jasper ore. Miner. Eng., 2019, 138, 204.

[15] Rath SS, Dhawan N, Rao DS, Das B, Mishra BK. Beneficiation studies of a difficult to treat iron ore using conventional and microwave roasting. Powder Technol., 2016, 301, 1016.

[16] Kumar P, Sahoo BK, De S, Kar DD, Chakraborty S, Meikap BC. Iron ore grindability improvement by microwave pre-treatment. J. Ind. Eng. Chem., 2010, 16(5): 805.

[17] Wang JP, Jiang T, Liu YJ, Xue XX. Influence of microwave treatment on grinding and dissociation characteristics of vanadium titano-magnetite. Int. J. Miner. Metall. Mater., 2019, 26(2): 160.

[18] Menéndez JA, Arenillas A, Fidalgo B, Fernandez Y, Zubizarreta L, Calvo EG, Bermúdez JM. Microwave heating process involving carbon materials. Fuel Process. Technol., 2010, 91(1): 1.

[19] Beuria PC, Biswal SK, Mishra BK, Roy GG. Study on kinetics of thermal decomposition of low LOI goethetic hematite iron ore. Int. J. Min. Sci. Technol., 2017, 27(6): 1031.

[20] Das SK, Das B, Sakthivel R, Mishra BK. Mineralogy, microstructure, and chemical composition of goethites in some iron ore deposits of orissa, India. Miner. Process. Extr. Metall. Rev., 2010, 31(2): 97.

[21] Nayak D, Dash N, Ray N, Rath SS. Utilization of waste coconut shells in the reduction roasting of overburden from iron ore mines. Powder Technol., 2019, 353, 450.

[22] Yu JW, Han YX, Li YJ, Gao P. Recent advances in magnetization roasting of refractory iron ores: A technological review in the past decade. Miner. Process. Extr. Metall. Rev., 2020, 41(5): 349.

[23] Jena BC, Dresler W, Reilly IG. Extraction of titanium, vanadium and iron from titanomagnetite deposits at pipestone lake, Manitoba, Canada. Miner. Eng., 1995, 8(1–2): 159.

[24] Wang S, Chen M, Guo YF, Jiang T, Zhao BJ. Reduction and smelting of vanadium titanomagnetite metallized pellets. JOM, 2019, 71(3): 1144.

[25] Zhao LS, Wang LN, Chen DS, Zhao HX, Liu YH, Qi T. Behaviors of vanadium and chromium in coal-based direct reduction of high-chromium vanadium-bearing titanomagnetite concentrates followed by magnetic separation. Trans. Nonferrous Met. Soc. China, 2015, 25(4): 1325.

[26] Hu T, Lv XW, Bai CG, Lun ZG, Qiu GB. Reduction behavior of panzhihua titanomagnetite concentrates with coal. Metall. Mater. Trans. B, 2013, 44(2): 252.

[27] Jiang T, Xu J, Guan SF, Xue XX. Study on coal-based direct reduction of high-chromium vanadium-titanium magnetite. J. Northeast. Univ., 2015, 36(1): 77.

[28] Jena MS, Tripathy HK, Mohanty JK, Mohanty JN, Das SK, Reddy PSR. Roasting followed by magnetic separation: A process for beneficiation of titano-magnetite ore. Sep. Sci. Technol., 2015, 50(8): 1221.

[29] Ishizaki K, Nagata K, Hayashi T. Production of pig iron from magnetite ore-coal composite pellets by microwave heating. ISIJ Int., 2006, 46(10): 1403.

[30] Ramdohr P. The Ore Minerals and Their Intergrowths, 1969, Netherlands, Elsevier

[31] Guo SH, Li W, Peng JH, Niu H, Huang MY, Zhang LB, Zhang SM, Huang M. Microwave-absorbing characteristics of mixtures of different carbonaceous reducing agents and oxidized ilmenite. Int. J. Miner. Process., 2009, 93(3–4): 289.

[32] Pickles CA, Mouris J, Hutcheon RM. High-temperature dielectric properties of goethite from 400 to 3000 MHz. J. Mater. Res., 2005, 20(1): 18.

[33] Kawahira K, Saito Y, Yoshikawa N, Todoroki H, Taniguchi S. Penetration depth of microwave into the mixture of goethite with graphite estimated by permittivity and conductivity. Metall. Mater. Trans. B, 2014, 45(1): 212.

[34] Saito Y, Kawahira K, Yoshikawa N, Todoroki H, Taniguchi S. Dehydration behavior of goethite blended with graphite by microwave heating. ISIJ Int., 2011, 51(6): 878.