Effect of heat treatment on the microstructure and mechanical properties of structural steel-mild steel composite plates fabricated by explosion welding

Abstract

Two dissimilar steel plates, structural steel and mild steel, were joined by explosion welding to form a composite. The composite was then heat-treated by quenching at 840°C for 30 min followed by tempering at 200°C for 3 h. The microstructure was investigated under an optical microscope and a scanning electron microscope. The mechanical properties were measured using Vickers microhardness and Charpy impact tests. The results show a deformed interface with typical wave features at the welding zone, but no defects were observed. Moreover, the ferrite in the parent plate in the weld zone was elongated due to the strong plastic deformation from the explosion. After heat treatment, the hardness of the flyer plate (structural steel) was over HV_0.2 800, while that of the parent plate (mild steel) was HV_0.2 200. The increase in hardness was due to the presence of martensite. Moreover, the average impact energy was increased from 18.5 to 44.0 J following heat treatment; this is because of the formation of recrystallized grains at the weld interface, which is due to the dynamic recovery and local recrystallization, and the strong elemental diffusion that occurred between the two plates.

Keywords

explosion welding / steel composite plate / microstructure / mechanical properties

References

[1] Zhao JZ, Zhang DY, Lu L, Wang ZR. Study on laser welding technology of GCr15 and non-process austenitic steel. Hot Working Technol., 2010, 39(13): 154.

[2] Avery RE. Pay attention to dissimilar-metal welds. Chem. Eng. Process, 1991, 87, 70.

[3] Çam G. Friction stir welded structural materials: Beyond Al-alloys. Int. Mater. Rev., 2011, 56(1): 1.

[4] Çam G, İpekoğlu G, Küçükömeroğlu T, Aktarer SM. Applicability of friction stir welding to steels. J. Achiev. Mater. Manuf. Eng., 2017, 2(80): 65.

[5] Küçükömeroğlu T, Aktarer SM, İpekoğlu G, Çam G. Microstructure and mechanical properties of friction stir welded St52 steel joints. Int. J. Miner. Metall. Mater., 2018, 25(12): 1457.

[6] Mater. Res. Express, 2019, 6(4) art. No. 046537

[7] Küçükömeroğlu T, Aktarer SM, İpekoğlu G, Çam G. Mechanical properties of friction stir welded St 37 and St 44 steel joints. Mater. Test., 2018, 60(12): 1163.

[8] Huang LY, Wang KS, Wang W, Zhao K, Yuan J, Qiao K, Zhang B, Cai J. Mechanical and corrosion properties of low-carbon steel prepared by friction stir processing. Int. J. Miner. Metall. Mater., 2019, 26(2): 202.

[9] Aval HJ. Microstructural evolution and mechanical properties of friction stir-welded C71000 copper-nickel alloy and 304 austenitic stainless steel. Int. J. Miner. Metall. Mater., 2018, 25(11): 1294.

[10] Aktarer SM, Sekban DM, Kucukomeroglu T, Purcek G. Microstructure, mechanical properties and formability of friction stir welded dissimilar materials of IF-steel and 6061 Al alloy. Int. J. Miner. Metall. Mater., 2019, 26(6): 722.

[11] Zhu HZ, Xiao DM, Zhong WS. Study on resistance welding process parameters of GCr15 steel ball and A3 steel plate. J. Liaoning Eng. Univ., 1993, 12(1): 24.

[12] G.R. Cowan, J.J. Douglass, and A.H. Holtzman, Explosive Bonding, US Patent, Appl. 3137937, 1964.

[13] Borchers C, Lenz M, Deutges M, Klein H, Gärtner F, Kreye H. Microstructure and mechanical properties of mediumcarbon steel bonded on low-carbon steel by explosive welding. Mater. Des., 2016, 89(8): 369.

[14] Tricarico L, Spina R, Sorgente D, Brandizzi M. Effects of heat treatments on mechanical properties of Fe/Al explosion-welded structural transition joints. Mater. Des., 2009, 30(7): 2693.

[15] G.A. Young and J.G. Banker, Explosion welded, bi-metallic solutions to dissimilar metal joining, [in] Proceedings of the 13th Offshore Symposium, USA, 2004, p. 1.

[16] Olson DL, Siewert TA. Welding, Brazing, and Soldering, Fundamentals of Explosion Welding, 1993, USA, ASM International

[17] Zhang TT, Wang WX, Zhou J, Yan ZF, Zhang J. Interfacial characteristics and nano-mechanical properties of dissimilar 304 austenitic stainless steel/AZ31B Mg alloy welding joint. J. Manuf. Processes, 2019, 42, 257.

[18] Yan YB, Zhang ZW, Shen W, Wang JH, Zhang LK, Chin BA. Microstructure and properties of magnesium AZ31B-aluminum7075 explosively welded composite plate. Mater. Sci. Eng., 2010, 527(9): 2241.

[19] Acarer M, Gülenç B, Findik F. Investigation of explosion welding parameters and their effects on microhardness and shear strength. Mater. Des., 2003, 24(8): 659.

[20] Wronka B. Testing of explosion welding and welded joints: The microstructure of explosion welded joints and their mechanical properties. J. Mater. Sci., 2010, 45(13): 3465.

[21] Xue Q, Gray GT. Development of adiabatic shear bands in annealed 316L stainless steel: Part II. TEM studies of the evolution of microstructure during deformation localization. Metall. Mater. Trans., 2006, 37(8): 2447.

[22] Shiran MK, Khalaj G, Pouraliakbar H, Jandaghi M, Bakhtiari H, Shirazi M. Effects of heat treatment on the inter-metallic compounds and mechanical properties of the stainless steel 321-aluminum 1230 explosive-welding interface. Int. J. Miner. Metall. Mater., 2017, 24(11): 1267.