Effect of calcium content on inclusions during the ladle furnace refining process of AISI 321 stainless steel

Abstract

The effect of three heat processes with different calcium contents on the evolution of inclusions during the ladle furnace refining process of AISI 321 stainless steel was investigated. The size, morphology, and composition of the inclusions were analyzed by scanning electron microscopy and energy-dispersive X-ray spectroscopy. After the addition of aluminum and titanium, the primary oxide in the AISI 321 stainless steel was an Al₂O₃-MgO-TiO _x complex oxide, in which the mass ratio of Al₂O₃/MgO was highly consistent with spinel (MgO·Al₂O₃). After calcium treatment, the calcium content in the oxide increased significantly. Thermodynamic calculations show that when the Ti content was 0.2wt%, the Al and Ca contents were less than 0.10wt% and 0.0005wt%, respectively, which was beneficial for the formation of liquid inclusions in molten steel. Moreover, the modification mechanism of calcium on TiN-wrapped oxides in combination with temperature changes was discussed.

Keywords

inclusions / stainless steel / calcium treatment / thermodynamic calculation

References

[1] Bai XF, Sun YH, Chen RM, Zhang YM, Cai YF. Formation and thermodynamics of CaS-bearing inclusions during Ca treatment in oil casting steels. Int. J. Miner. Metall. Mater., 2019, 26(5): 573.

[2] Gu C, Bao YP, Gan P, Wang M, He JS. Effect of main inclusions on crack initiation in bearing steel in the very high cycle fatigue regime. Int. J. Miner. Metall. Mater., 2018, 25(6): 623.

[3] Yin X, Sun YH, Yang YD, Bai XF, Barati M, Mclean A. Formation of inclusions in Ti-stabilized 17Cr austenitic stainless steel. Metall. Mater. Trans. B, 2016, 47(6): 3274.

[4] Pak JJ, Jo JO, Kim SI, Kim WY, Chung TI, Seo SM, Park JH, Kim DS. Thermodynamics of titanium and oxygen dissolved in liquid iron equilibrated with titanium oxides. ISIJ Int., 2007, 47(1): 16.

[5] Haj M, Mansouri H, Vafaei R, Ebrahimi GR, Kanani A. Hot compression deformation behavior of AISI 321 austenitic stainless steel. Int. J. Miner. Metall. Mater., 2013, 20(6): 529.

[6] Pardo A, Merino MC, Coy AE, Viejo F, Carboneras M, Arrabal R. Influence of Ti, C and N concentration on the intergranular corrosion behaviour of AISI 316Ti and 321 stainless steels. Acta Mater., 2007, 55(7): 2239.

[7] Ozturk B, Matway R, Fruehan R J. Thermodynamics of inclusion formation in Fe-Cr-Ti-N alloys. Metall. Mater. Trans. B, 1995, 26(3): 563.

[8] Ma WJ, Bao YP, Zhao LH, Wang M. Control of the precipitation of TiN inclusions in gear steels. Int. J. Miner. Metall. Mater., 2014, 21(3): 234.

[9] Gao Y, Sorimachi K. Formation of clogging materials in an immersed nozzle during continuous casting of titanium stabilized stainless steel. ISIJ Int., 1993, 33(2): 291.

[10] Cui H, Bao YP, Wang M, Wu WS. Clogging behavior of submerged entry nozzles for Ti-bearing IF steel. Int. J. Miner. Metall. Mater., 2010, 17(2): 154.

[11] Wang R, Bao YP, Yan ZJ, Li DZ, Kang Y. Comparison between the surface defects caused by Al₂O₃ and TiN inclusions in interstitial-free steel auto sheets. Int. J. Miner. Metall. Mater., 2019, 26(2): 178.

[12] Zhou DG, Fu J, Chen XC, Li J. Precipitation behavior of TiN in bearing steel. J. Mater. Sci. Technol., 2003, 19(2): 184.

[13] Lee SB, Choi JH, Lee HG, Rhee PCH, Jung SM. Aluminum deoxidation equilibrium in liquid Fe-16 pct Cr alloy. Metall. Mater. Trans. B, 2005, 36(3): 414.

[14] Seo CW, Kim SH, Jo SK, Suk MO, Byun SM. Modification and minimization of spinel (Al₂O₃·xMgO) inclusions formed in Ti-added steel melts. Metall. Mater. Trans. B, 2010, 41(4): 790.

[15] Verma N, Pistorius PC, Fruehan RJ, Potter MS, Oltmann HG, Pretorius EB. Calcium modification of spinel inclusions in aluminum-killed steel: reaction steps. Metall. Mater. Trans. B, 2012, 43(4): 830.

[16] Yang SF, Li JS, Wang ZF, Li J, Lin L. Modification of MgO·Al₂O₃ spinel inclusions in Al-killed steel by Ca-treatment. Int. J. Miner. Metall. Mater., 2011, 18(1): 18.

[17] Zhang TS, Liu CJ, Jiang MF. Effect of Mg on behavior and particle size of inclusions in Al-Ti deoxidized molten steels. Metall. Mater. Trans. B, 2016, 47(4): 2253.

[18] Van Ende MA, Guo MX, Dekkers R, Burty M, Van Dyck J, Jones PT, Blanpain B, Wollants P. Formation and evolution of Al-Ti oxide inclusions during secondary steel refining. ISIJ Int., 2009, 49(8): 1133.

[19] Wang C, Nuhfer NT, Sridhar S. Transient behavior of inclusion chemistry, shape, and structure in Fe-Al-Ti-O melts: effect of gradual increase in Ti. Metall. Mater. Trans. B, 2010, 41(5): 1084.

[20] Yin X, Sun Y, Yang Y, Deng X, Barati M, McLean A. Effect of alloy addition on inclusion evolution in stainless steels. Ironmaking Steelmaking, 2017, 44(2): 152.

[21] Ren Y, Zhang LF, Yang W, Duan HJ. Formation and thermodynamics of Mg-Al-Ti-O complex inclusions in Mg-Al-Ti-deoxidized steel. Metall. Mater. Trans. B, 2014, 45(6): 2057.

[22] Zhang T, Liu C, Qiu J, Li X, Jiang M. Effect of Ti content on the characteristics of inclusions in Al-Ti-Ca complex deoxidized steel. ISIJ Int., 2017, 57(2): 314.

[23] Cha WY, Miki T, Sasaki Y, Hino M. Temperature dependence of Ti deoxidation equilibria of liquid iron in coexistence with ‘Ti₃O₅’ and Ti₂O₃. ISIJ Int., 2008, 48(6): 729.

[24] Cha WY, Nagasaka T, Miki T, Sasaki Y, Hino M. Equilibrium between titanium and oxygen in liquid Fe-Ti alloy coexisted with titanium oxides at 1873 K. ISIJ Int., 2006, 46(7): 996.

[25] Jung IH, Eriksson G, Wu P, Pelton A. Thermodynamic modeling of the Al₂O₃-Ti₂O₃-TiO₂ system and its applications to the Fe-Al-Ti-O inclusion diagram. ISIJ Int., 2009, 49(9): 1290.

[26] Matsuura H, Wang C, Wen G, Sridhar S. The transient stages of inclusion evolution during Al and/or Ti additions to molten iron. ISIJ Int., 2007, 47(9): 1265.

[27] Wang HP, Sun LF, Peng B, Jiang MF. Inclusions for ultra-pure ferritic stainless steels containing 21% chromium. J. Iron Steel Res. Int., 2013, 20(10): 70.

[28] Hino M, Ito K. Thermodynamic Data for Steelmaking, 2010, Sendai, Tohoku University Press, 72.

[29] Siwka J. Equilibrium constants and nitrogen activity in liquid metals and iron alloys. ISIJ Int., 2008, 48(4): 385.

[30] Janke D, Fischer A. Deoxidation equilibria of titanium, aluminum, and zirconium in iron melts at 1600 degree C. Arch. Eisenhuttenwes, 1976, 47(4): 195.

[31] Zheng W, Wu ZH, Li GQ, Zhang Z, Zhu CY. Effect of Al content on the characteristics of inclusions in Al-Ti complex deoxidized steel with calcium treatment. ISIJ Int., 2014, 54(8): 1755.