Electrodeposition of functionally graded Ni-W/Er2O3 rare earth nanoparticle composite film

Guo-quan Lai , Hong-zhong Liu , Bang-dao Chen , Dong Niu , Biao Lei , Wei-tao Jiang

International Journal of Minerals, Metallurgy, and Materials ›› 2020, Vol. 27 ›› Issue (6) : 818 -829.

PDF
International Journal of Minerals, Metallurgy, and Materials ›› 2020, Vol. 27 ›› Issue (6) : 818 -829. DOI: 10.1007/s12613-019-1953-z
Article

Electrodeposition of functionally graded Ni-W/Er2O3 rare earth nanoparticle composite film

Author information +
History +
PDF

Abstract

Multi-layered functionally graded (FG) structure Ni-W/Er2O3 nanocomposite films were prepared by continuously changing the deposition parameters, in which the Er2O3 and W contents varied with thickness. The microstructure and chemical composition of the electrode-posited Ni-W/Er2O3 films were determined by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The anti-corrosion and wear properties of the electrodeposition films were investigated by electrochemical measurement and ball-on-disk friction test. The microhardness distribution of the cross section of nanocomposites was measured by nanoindentation. The results showed that with decreasing agitation rate or increasing average current density, the contents of Er2O3 nanoparticles and tungsten were distributed in a gradient along the thickness, and the contents on the surface were larger. By comparison, FG Ni-W/Er2O3 films had better anti-corrosion and wear properties than the uniform Ni-W/Er2O3 films. Atomic force microscopy (AFM) and profilometry measurements indicated that Er2O3 nanoparticles had an effect on the surface roughness.

Keywords

nickel—tungsten / electrodeposition / functionally graded material / nanocomposite / erbium oxide nanoparticle

Cite this article

Download citation ▾
Guo-quan Lai, Hong-zhong Liu, Bang-dao Chen, Dong Niu, Biao Lei, Wei-tao Jiang. Electrodeposition of functionally graded Ni-W/Er2O3 rare earth nanoparticle composite film. International Journal of Minerals, Metallurgy, and Materials, 2020, 27(6): 818-829 DOI:10.1007/s12613-019-1953-z

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Bostani B, Ahmadi NP, Yazdani S, Arghavanian R. Synthesis and characterization of functionally gradient Ni-ZrO2 composite coating. Prot. Met. Phys. Chem. Surf., 2018, 54(2): 222.

[2]

Li BS, Zhang WW, Zhang W, Huan YX. Preparation of Ni-W/SiC nanocomposite coatings by electrochemical deposition. J. Alloys Compd., 2017, 702, 38.

[3]

Li BS, Zhang WW, Huan YX, Dong J. Synthesis and characterization of Ni-B/Al2O3 nanocomposite coating by electrodeposition using trimethylamine borane as boron precursor. Surf. Coat. Technol., 2018, 337, 186.

[4]

Shi L, Sun CF, Gao P, Zhou F, Liu WM. Mechanical properties and wear and corrosion resistance of electrodeposited Ni-Co/SiC nanocomposite coating. Appl. Surf. Sci., 2006, 252(10): 3591.

[5]

Zhang JX, Wang XM, Qin DD, Xue ZH, Lu XQ. Fabrication of iron-doped cobalt oxide nanocomposite films by electrodeposition and application as electrocatalyst for oxygen reduction reaction. Appl. Surf. Sci., 2014, 320, 73.

[6]

Wang LP, Gao Y, Xue QJ, Liu HW, Xu T. Graded composition and structure in nanocrystalline Ni-Co alloys for decreasing internal stress and improving tribological properties. J. Phys. D: Appl. Phys., 2005, 38(8): 1318.

[7]

Wiklund U, Gunnars J, Hogmark S. Influence of residual stresses on fracture and delamination of thin hard coatings. Wear, 1999, 232(2): 262.

[8]

Yamasaki T, Schloßmacher P, Ehrlich K, Ogino Y. Formation of amorphous electrodeposited Ni-W alloys and their nanocrystallization. Nanostruct. Mater., 1998, 10(3): 375.

[9]

Dong YS, Lin PH, Wang HX. Electroplating preparation of Ni-Al2O3 graded composite coatings using a rotating cathode. Surf. Coat. Technol., 2006, 200(11): 3633.

[10]

Khor KA, Gu YW. Effects of residual stress on the performance of plasma sprayed functionally graded ZrO2/NiCo-CrAlY coatings. Mater. Sci. Eng. A, 2000, 277(1–2): 64.

[11]

Peng X, Yan J, Zheng L, Wang F. Oxidation of a novel CeO2 — dispersed chromium coating in wet air. Mater. Corros., 2011, 62(6): 514.

[12]

Put S, Vleugels J, Van der Biest O. Functionally graded WC-Co materials produced by electrophoretic deposition. Scripta Mater., 2001, 45(10): 1139.

[13]

Han BL, Lu XC. Effect of La2O3 on microstructure, mechanical and tribological properties of Ni-W coatings. Chin. Sci. Bull., 2009, 54(24): 4566.

[14]

Guo ZC, Zhu XY. Studies on properties and structure of electrodeposited RE-Ni-W-B-SiC composite coating. Mater. Sci. Eng. A, 2003, 363(1–2): 325.

[15]

Li BS, Zhang WW, Li DD, Huan YX, Dong J. Micro-structural, surface and electrochemical properties of a novel Ni-B/Ni-W-BN duplex composite coating by co-electrodeposition. Appl. Surf. Sci., 2018, 458, 305.

[16]

García-Lecina E, García-Urrutia I, Díez JA, Salvo M, Smeacetto F, Gautier G, Seddon R, Martin R. Electrochemical preparation and characterization of Ni/SiC compositionally graded multilayered coatings. Electrochim. Acta, 2009, 54(9): 2556.

[17]

Low CT, Wills RGA, Walsh FC. Electrodeposition of composite coatings containing nanoparticles in a metal deposit. Surf. Coat. Technol., 2006, 201(1–2): 371.

[18]

Indyka P, Beltowska-Lehman E, Tarkowski L, Bigos A, Garcia-Lecina E. Structure characterization of nanocrystalline Ni-W alloys obtained by electrodeposition. J. Alloys Compd, 2014, 590, 75.

[19]

Lee S, Kim S. Electrochemical synthesis and characterization of erbium oxide. Ceram. Int., 2016, 42(16): 18425.

[20]

Zhang MF, Zhu CF, Yang CP, Lv YN. Preparation of amorphous Ni-W coating for the current collector of Na/S battery by electrodeposition. Surf. Coat. Technol, 2018, 346, 40.

[21]

Orrillo PA, Ribotta SB, Gassa LM, Benítez G, Salvarezza RC, Vela ME. Phosphonic acid functionalization of nanostructured Ni-W coatings on steel. Appl. Surf. Sci., 2018, 433, 292.

[22]

Brooman EW. Corrosion performance of environmentally acceptable alternatives to cadmium and chromium coatings: Chromium—Part II. Met. Finish., 2000, 98(8): 39.

[23]

Kirihara S, Umeda Y, Tashiro K, Honma H, Takai O. Development of Ni-W alloy plating as a substitution of hard chromium plating. Trans. Mater. Res. Soc. Jpn, 2016, 41(1): 35.

[24]

Hao L, Wei J, Gan FX. Electroless Ni-P coating on W-Cu composite via three different activation processes. Surf. Eng., 2009, 25(5): 372.

[25]

Lajevardi SA, Shahrabi T, Szpunar JA. Tribological properties of functionally graded Ni-Al2O3 nanocomposite coating. J. Electrochem. Soc., 2017, 164(6): D275.

[26]

Li H, He Y, He T, Qing DY, Luo FJ, Fan Y, Chen X. Ni-W/BN(h) electrodeposited nanocomposite coating with functionally graded microstructure. J. Alloys Compd., 2017, 704, 32.

[27]

Suvorov DV, Gololobov GP, Tarabrin DY, Slivkin EV, Karabanov SM, Tolstoguzov A. Electrochemical deposition of Ni-W crack-free coatings. Coatings, 2018, 8(7): 233.

[28]

Eliaz N, Sridhar TM, Gileadi E. Synthesis and characterization of nickel tungsten alloys by electrodeposition. Electrochim. Acta, 2005, 50(14): 2893.

[29]

Chianpairot A, Lothongkum G, Schuh CA, Boonyongmaneerat Y. Corrosion of nanocrystalline Ni-W alloys in alkaline and acidic 3.5wt% NaCl solutions. Corros. Sci, 2011, 53(3): 1066.

[30]

Younes O, Gileadi E. Electroplating of high tungsten content Ni/W alloys. Electrochem. Solid-State Lett., 2000, 3(12): 543.

[31]

Younes O, Gileadi E. Electroplating of Ni/W alloys: I. Ammoniacal citrate baths. J. Electrochem. Soc., 2002, 149(2): C100.

[32]

Ma M, Donepudi VS, Sandi G, Sun YK, Prakash J. Electrodeposition of nano-structured nickel-21% tungsten alloy and evaluation of oxygen reduction reaction in a 1% sodium hydroxide solution. Electrochim. Acta, 2004, 49(25): 4411.

[33]

Sriraman KR, Raman SGS, Seshadri SK. Synthesis and evaluation of hardness and sliding wear resistance of electrode-posited nanocrystalline Ni-W alloys. Mater. Sci. Eng. A, 2006, 418(1–2): 303.

[34]

Guglielmi N. Kinetics of the deposition of inert particles from electrolytic baths. J. Electrochem. Soc, 1972, 119(8): 1009.

[35]

Landolt D. Electrochemical and materials science aspects of alloy deposition. Electrochim. Acta, 1994, 39(8–9): 1075.

[36]

Allahyarzadeh MH, Aliofkhazraei M, Rouhaghdam ARS, Torabinejad V. Electrodeposition of Ni-W-Al2O3 nanocomposite coating with functionally graded microstructure. J. Alloys Compd., 2016, 666, 217.

[37]

Li BS, Li DD, Chen W, Liu YY, Zhang J, Wei YL, Zhang WW, Jia WC. Effect of current density and deposition time on microstructure and corrosion resistance of Ni-W/TiN nanocomposite coating. Ceram. Int., 2019, 45(4): 4870.

[38]

Sen RJ, Das S, Das K. Effect of stirring rate on the microstructure and microhardness of Ni-CeO2 nnnooompoiite coating and investigation of the corrosion property. Surf. Coat. Technol., 2011, 205(13–14): 3847.

[39]

Yang FZ, Guo YF, Huang L, Xu SK, Zhou SM. Electrodeposition, structure and corrosion resistance of nanocrystalline Ni-W alloy. Chin. J. Chem., 2004, 22(3): 228.

[40]

Baghal SML, Sohi MH, Amadeh A. A functionally gradient nano-Ni-Co/SiC composite coating on aluminum and its tribological properties. Surf. Coat. Technol., 2012, 206(19–20): 4032.

[41]

Chang LM, Wang ZT, Shi SY, Liu W. Study on microstructure and properties of electrodeposited Ni-W alloy coating with glycolic acid system. J. Alloys Compd., 2011, 509(5): 1501.

[42]

Yao YW, Yao SW, Zhang L, Wang HZ. Electrodeposition and mechanical and corrosion resistance properties of Ni-W/SiC nanocomposite coatings. Mater. Lett., 2007, 61(1): 67.

[43]

Hou KH, Wang HT, Sheu HH, Ger MD. Preparation and wear resistance of electrodeposited Ni-W/diamond composite coatings. Appl. Surf. Sci., 2014, 308, 372.

[44]

Udompanit N, Wangyao P, Henpraserttae S, Boonyongmaneerat Y. Wear response of composition-modulated multilayer Ni-W coatings. Adv. Mater. Res., 2014, 1026, 302.

[45]

Wang HT, Sheu HH, Ger MD, Hou KH. The effect of heat treatment on the microstructure and mechanical properties of electrodeposited nanocrystalline Ni-W/diamond composite coatings. Surf. Coat. Technol., 2014, 259, 268.

[46]

Yao YW. Preparation, mechanical property and wear resistance of Ni-W/Al2O3 composite coatings. Surf. Eng., 2008, 24(3): 226.

[47]

Hou KH, Chen YC. Preparation and wear resistance of pulse electrodeposited Ni-W/Al2O3 composite coatings. Appl. Surf. Sci., 2011, 257(15): 6340.

[48]

Beltowska-Lehman E, Indyka P, Bigos A, Kot M, Tarkowski L. Electrodeposition of nanocrystalline Ni-W coatings strengthened by ultrafine alumina particles. Surf. Coat. Technol., 2012, 211, 62.

[49]

Wang LP, Zhang JY, Zeng ZX, Lin YM, Hu LT, Xue QJ. Fabrication of a nanocrystalline Ni-Co/CoO functionally graded layer with excellent electrochemical corrosion and tribological performance. Nanotechnology, 2006, 17(18): 4614.

[50]

Bakhit B, Akbari A, Nasirpouri F, Hosseini MG. Corrosion resistance of Ni-Co alloy and Ni-Co/SiC nanocomposite coatings electrodeposited by sediment codeposition technique. Appl. Surf. Sci., 2014, 307, 351.

[51]

Daneshvar-Fatah F, Nasirpouri F. A study on electrodeposition of Ni-noncovalnetly treated carbon nanotubes nanocomposite coatings with desirable mechanical and anti-corrosion properties. Surf. Coat. Technol., 2014, 248, 63.

AI Summary AI Mindmap
PDF

105

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/