Fatigue limit assessment of a 6061 aluminum alloy based on infrared thermography and steady ratcheting effect

Abstract

To quickly predict the fatigue limit of 6061 aluminum alloy, two assessment methods based on the temperature evolution and the steady ratcheting strain difference under cyclic loading, respectively, were proposed. The temperature evolutions during static and cyclic loadings were both measured by infrared thermography. Fatigue tests show that the temperature evolution was closely related to the cyclic loading, and the cyclic loading range can be divided into three sections according to the regular of temperature evolution in different section. The mechanism of temperature evolution under different cyclic loadings was also analyzed due to the thermoelastic, viscous, and thermoplastic effects. Additionally, ratcheting strain under cyclic loading was also measured, and the results show that the evolution of the ratcheting strain under cyclic loading above the fatigue limit undergone three stages: the first increasing stage, the second steady state, and the final abrupt increase stage. The fatigue limit of the 6061 aluminum alloy was quickly estimated based on transition point of linear fitting of temperature increase and the steady value of ratcheting strain difference. Besides, it is feasible and quick of the two methods by the proof of the traditional S-N curve.

Keywords

6061 Aluminum / temperature evolution / fatigue limit / ratcheting strain

References

[1] Chen YQ, Pan SP, Zhou MZ, Yi DQ, Xu DZ, Xu YF. Effects of inclusions, grain boundaries and grain orientations on the fatigue crack initiation and propagation behavior of 2524-T3 Al alloy. Mater. Sci. Eng. A, 2013, 580, 150.

[2] Williams JC, Starke EA. Progress in structural materials for aerospace systems. Acta. Mater., 2003, 51(19): 5775.

[3] Roberts TM, Talebzadeh M. Fatigue life prediction based on crack propagation and acoustic emission count rates. J. Constr. Steel Res., 2003, 59(6): 679.

[4] Zhang L, Liu XS, Wu SH, Ma ZQ, Fang HY. Rapid determination of fatigue life based on temperature evolution. Int. J. Fatigue, 2013, 54, 1.

[5] Bagavathiappan S, Lahiri BB, Saravanan T, Philip J, Jayakumar T. Infrared thermography for condition monitoring—A review. Infrared Phys. Technol., 2013, 60, 35.

[6] Fan JL, Guo XL, Wu CW. A new application of the infrared thermography for fatigue evaluation and damage assessment. Int. J. Fatigue, 2012, 44, 1.

[7] Cui ZQ, Yang HW, Wang WX, Yan ZF, Ma ZZ, Xu BS, Xu HY. Research on fatigue crack growth behavior of AZ31B magnesium alloy electron beam welded joints based on temperature distribution around the crack tip. Eng. Fract. Mech., 2015, 133, 14.

[8] Xu ZQ, Zhang HX, Yan ZF, Liu F, Liaw PK, Wang WX. Three-point-bending fatigue behavior of AZ31B magnesium alloy based on infrared thermography technology. Int. J. Fatigue, 2017, 95, 156.

[9] Yan ZF, Zhang HX, Chen PD, Wang WX. Anisotropy of fatigue behavior and tensile behavior of 5A06 aluminum alloy based on infrared thermography. J. Wuhan Univ. Technol.-Mater. Sci. Ed., 2017, 32(1): 155.

[10] Bandeira CFC, Kenedi PP, Souza LFG, de Barros S. On the use of thermographic technique to assess the fatigue performance of bonded joints. Int. J. Adhes. Adhes., 2018, 83, 137.

[11] Yang WP, Guo XL, Guo Q, Fan JL. Rapid evaluation for high-cycle fatigue reliability of metallic materials through quantitative thermography methodology. Int. J. Fatigue, 2019, 124, 461.

[12] Dutta K, Ray KK. Ratcheting phenomenon and post-ratcheting tensile behavior of an aluminum alloy. Mater. Sci. Eng. A, 2012, 540, 30.

[13] Kreethi R, Verma P, Dutta K. Influence of heat treatment on ratcheting fatigue behavior and post ratcheting tensile properties of commercial aluminum. Trans. Indian Inst. Met., 2015, 68(2): 229.

[14] Sreenivasan S, Mishra SK, Dutta K. Ratcheting strain and its effect on low cycle fatigue behavior of Al 7075-T6 alloy. Mater. Sci. Eng. A, 2017, 698, 46.

[15] Mishra SK, Roy H, Dutta K. Influence of ratcheting strain on tensile properties of A356 alloy. Mater. Today: Proc., 2018, 5(5): 12403.

[16] Lin YC, Liu ZH, Chen XM, Long ZL. Cyclic plasticity constitutive model for uniaxial ratcheting behavior of AZ31B magnesium alloy. J. Mater. Eng. Perform., 2015, 24(5): 1820.

[17] Lin YC, Chen XM, Liu ZH, Chen J. Investigation of uniaxial low-cycle fatigue failure behavior of hot-rolled AZ91 magnesium alloy. Int. J. Fatigue, 2013, 48, 122.

[18] Yang B, Liaw PK, Morrison M, Liu CT, Buchanan RA, Huang JY, Kuo RC, Huang JG, Fielden DE. Tempreature evolution during fatigue damage. Intermetallics, 2005, 13(3–4): 419.

[19] Yang B, Liaw PK, Huang JY, Kuo RC, Huang JG, Fielden DE. Stress analyses and geometry effects during cyclic loading using thermography. J. Eng. Mater. Technol., 2005, 127(1): 75.

[20] Lee HT, Shaue GH. The thermomechanical behavior for aluminum alloy under uniaxial tensile loading. Mater. Sci. Eng. A, 1999, 268(1–2): 154.

[21] Yang B, Wang G, Peter WH, Liaw PK, Buchanan RA, Fielden DE, Yokoyama Y, Huang JY, Kuo RC, Huang JG, Klarstrom DL. Thermal-imaging technologies for detecting damage during high-cycle fatigue. Metal. Mater. Trans. A, 2004, 35(1): 15.

[22] Zhang YT. Theory of Thermo-Viscoelasticity, 2002, Tianjin, Tianjin University Press

[23] Anish KS, Pillai PV. Stress pattern analysis using thermal camera. Int. J. Adv. Prod. Mech. Eng., 2016, 2(5): 5.

[24] Lin YC, Liu ZH, Chen XM, Chen J. Uniaxial ratcheting and fatigue failure behaviors of hot-rolled AZ31B magnesium alloy under asymmetrical cyclic stress controlled loadings. Mater. Sci. Eng. A, 2013, 573, 234.

[25] Yan ZF, Wang DH, He XL, Wang WX, Zhang HX, Dong P, Li CH, Li YL, Zhou J, Liu Z, Sun LY. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect. Mater. Sci. Eng. A, 2018, 723, 212.