Controlled synthesis of nanosized Si by magnesiothermic reduction from diatomite as anode material for Li-ion batteries
Li-fen Guo , Shi-yun Zhang , Jian Xie , Dong Zhen , Yuan Jin , Kang-yan Wan , Da-gao Zhuang , Wen-quan Zheng , Xin-bing Zhao
International Journal of Minerals, Metallurgy, and Materials ›› 2020, Vol. 27 ›› Issue (4) : 515 -525.
Controlled synthesis of nanosized Si by magnesiothermic reduction from diatomite as anode material for Li-ion batteries
Li-ion batteries (LIBs) have demonstrated great promise in electric vehicles and hybrid electric vehicles. However, commercial graphite materials, the current predominant anodes in LIBs, have a low theoretical capacity of only 372 mAh·g-1, which cannot meet the ever-increasing demand of LIBs for high energy density. Nanoscale Si is considered an ideal form of Si for the fabrication of LIB anodes as Si-C composites. Synthesis of nanoscale Si in a facile, cost-effective way, however, still poses a great challenge. In this work, nanoscale Si was prepared by a controlled magnesiothermic reaction using diatomite as the Si source. It was found that the nanoscale Si prepared under optimized conditions (800°C, 10 h) can deliver a high initial specific capacity (3053 mAh·g-1 on discharge, 2519 mAh·g-1 on charge) with a high first coulombic efficiency (82.5%). When using sand-milled diatomite as a precursor, the obtained nanoscale Si exhibited a well-dispersed morphology and had a higher first coulombic efficiency (85.6%). The Si-C (Si: graphite = 1:7 in weight) composite using Si from the sand-milled diatomite demonstrated a high specific capacity (over 700 mAhg”1 at 100 mAg”1), good rate capability (587mAh·g-1 at 500 mA·g-1), and a long cycle life (480 mAh·g-1 after 200 cycles at 500 mA·g-1). This work gives a facile method to synthesize nanoscale Si with both high capacity and high first coulombic efficiency.
silicon anode / magnesiothermic reduction / diatomite / Li-ion batteries
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
|
| [7] |
J. Park, G.P. Kim, I. Nam, S. Park, and J. Yi, One-pot synthesis of silicon nanoparticles trapped in ordered mesoporous carbon for use as an anode material in lithium-ion batteries, Nanotechnology, 24(2012), No. 2, art. No. 025602. |
| [8] |
|
| [9] |
|
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
|
| [17] |
|
| [18] |
|
| [19] |
|
| [20] |
|
| [21] |
|
| [22] |
|
| [23] |
|
| [24] |
|
| [25] |
|
| [26] |
|
| [27] |
|
| [28] |
|
| [29] |
|
| [30] |
|
| [31] |
|
| [32] |
S. Chae, N. Kim, J. Ma, J. Cho, and M. Ko, One-to-one comparison of graphite-blended negative electrodes using silicon nanolayer-embedded graphite versus commercial benchmarking materials for high-energy lithium-ion batteries, A/v. Energy Mater., 7(2017), No. 15, art. No. 1700071. |
| [33] |
|
| [34] |
|
| [35] |
|
| [36] |
|
| [37] |
|
| [38] |
|
| [39] |
|
| [40] |
|
| [41] |
|
| [42] |
|
| [43] |
|
/
| 〈 |
|
〉 |