Effect of low-energy proton on the microstructure, martensitic transformation and mechanical properties of irradiated Ni-rich TiNi alloy thin films

Hai-zhen Wang , Yun-dong Zhao , Yue-hui Ma , Zhi-yong Gao

International Journal of Minerals, Metallurgy, and Materials ›› 2020, Vol. 27 ›› Issue (4) : 538 -543.

PDF
International Journal of Minerals, Metallurgy, and Materials ›› 2020, Vol. 27 ›› Issue (4) : 538 -543. DOI: 10.1007/s12613-019-1893-7
Article

Effect of low-energy proton on the microstructure, martensitic transformation and mechanical properties of irradiated Ni-rich TiNi alloy thin films

Author information +
History +
PDF

Abstract

Ni–48.5at%Ti thin films were irradiated in the austenite phase by different energy-level protons at a dose rate of 1.85 × 1012 p/(cm2·s), and the total dose was 2.0 × 1016 p/cm2. The microstructures of the thin films before and after irradiation were evaluated by transmission electron microscopy (TEM) and grazing-incidence X-ray diffraction (GIXRD), which showed that the volume fraction of Ti3Ni4 phase elevated with proton energy level. The influence of proton irradiation on the transformation behavior of the TiNi thin films was investigated by differential scanning calorimetry (DSC). Compared with the unirradiation film, the reverse transformation start temperatures (A s) decreased by about 3°C after 120 keV proton-irradiation. The proton irradiation also had a significant effect on the mechanical properties of the TiNi thin films. After 120 keV energy proton-irradiation, the fracture strength increased by 8.44%, and the critical stress increased by 21.1%. In addition, the nanoindenter measurement image showed that the hardness of the thin films increased with the increase of proton-irradiation energy. This may be due to the defects caused by irradiation, which strengthen the matrix.

Keywords

TiNi thin film / proton irradiation / microstructure / martensitic transformation / mechanical properties

Cite this article

Download citation ▾
Hai-zhen Wang, Yun-dong Zhao, Yue-hui Ma, Zhi-yong Gao. Effect of low-energy proton on the microstructure, martensitic transformation and mechanical properties of irradiated Ni-rich TiNi alloy thin films. International Journal of Minerals, Metallurgy, and Materials, 2020, 27(4): 538-543 DOI:10.1007/s12613-019-1893-7

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Huang WM, Ding Z, Wang CC, Wei J, Zhao Y, Purnawali H. Shape memory materials. Mater. Today, 2010, 13, 54.

[2]

Elahinia M, Moghaddam NS, Andani MT, Amerinatanzi A, Bimber BA, Hamilton RF. Fabrication of NiTi through additive manufacturing: A review. Prog. Mater. Sci., 2016, 83, 630.

[3]

Miyazaki S, Otsuka K, Wayman CM. The shape memory mechanism associated with the martensitic transformation in Ti–Ni alloys—I. Self-accommodation. Acta Metall., 1989, 37, 1873.

[4]

Humbeeck JV. Non-medical applications of shape memory alloys. Mater. Sci. Eng. A, 1999, 273–275, 134.

[5]

Benton ER, Benton EV. Space radiation dosimetry in low-Earth orbit and beyond. Nucl. Instrum. Methods Phys. Res. Sect. B, 2001, 184, 255.

[6]

Zhu YY, Wang HZ, Gao ZY, Cai W. Martensitic transformation and microstructure of dual-phase Ti44Ni47Nb9 shape memory alloy after high-velocity impact. Mater. Charact., 2016, 122, 162.

[7]

Bourdarie S, Xapsos M. The near-Earth space radiation environment. IEEE Tran. Nucl, Sci., 2008, 55, 1810.

[8]

Wang HZ, Yi XY, Zhu YY, Yin YK, Gao Y, Cai W, Gao ZY. Atom redistribution and multilayer structure in NiTi shape memory alloy induced by high energy proton irradiation. Appl. Surf. Sci., 2017, 419, 91.

[9]

Kilmametov AR, Gunderov DV, Valiev RZ, Balogh AG, Hahn H. Enhanced ion irradiation resistance of bulk nanocrystalline TiNi alloy. Scripta Mater., 2008, 59, 1027.

[10]

Wang HZ, Yi XY, Zhu YY, Sun SB, Gao Y, Cai W, Gao ZY. Effects of proton irradiation on the microstructure and shape recovery characteristics of a NiTi alloy. Mater. Charact., 2018, 140, 122.

[11]

Afzal N, Ghauri IM, Mubarik FE, Amin F. Mechanical response of proton beam irradiated nitinol. Physica B, 2011, 406, 8.

[12]

Huo Y, Zu XT, Li A, Wang ZG, Wang LM. Modeling and simulation of irradiation effects on martensitic transformations in shape memory alloys. Acta Mater., 2004, 52, 2683.

[13]

Dughaish ZH. Effect of proton irradiation on some physical properties of nitinol (NiTi) shape memory alloy: A review. Arabian J. Sci. Eng., 2014, 39, 511.

[14]

Cheng J, Ardell AJ. Proton-irradiation-induced crystalline to amorphous transition in a NiTi alloy. Nucl. Instrum. Methods Phys. Res. Sect. B, 1990, 44, 336.

[15]

Wang ZG, Zu XT, Fu YQ, Wu JH, Du HJ. Effects of proton irradiation on transformation behavior of Ti-Ni shape memory alloy thin films. Thin Solid Films, 2005, 474, 322.

[16]

Al-Aql AA. Study of the influence of proton irradiation on the transformation temperature of nitinol by electrical resistivity measurements. Physica B, 1997, 239, 345.

[17]

Yang ZP, Gao ZY, Cai W. Proton-irradiation-induced structural and magnetic property changes in Ni–Mn–Ga high-temperature shape memory films. Mater. Sci. Eng. B, 2017, 223, 76.

AI Summary AI Mindmap
PDF

130

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/