Preparation of WC/CoCrFeNiAl_0.2 high-entropy-alloy composites by high-gravity combustion synthesis

Abstract

The WC/CoCrFeNiAl_0.2 high-entropy alloy (HEA) composites were prepared through high-gravity combustion synthesis. The preparation method is presented below. First, using a designed suitable multiphase thermite system, the molten CoCrFeNiAl_0.2 HEA was fabricated using low-cost metal oxides. The molten HEA was subsequently infiltrated into the WC layer to fabricate WC/CoCrFeNiAl_0.2 composites in a high-gravity field. The porosity of the WC/CoCrFeNiAl_0.2 composites was down-regulated, and their compressive yield strength was up-regulated when the high-gravity field was increased from 600g to 1500g because this infiltration process of a HEA melt into the WC layer is driven by centrifugal force. The WC particles in the composites exhibited a gradient distribution along the direction of the centrifugal force, which was attributed to the combined action of the high-gravity field and the temperature gradient field. The Vickers hardness of the sample was down-regulated from 9.53 to 7.41 GPa along the direction of the centrifugal force.

Keywords

composites / high-entropy alloy / high-gravity combustion synthesis / gradient material

References

[1] Pierson HO. Handbook of Refractory Carbides & N-trides: Properties, Characteristics, Processing and Apps, 1996, New Jersey, William Andrew, 100.

[2] Upadhyaya GS. Cemented Tungsten Carbides: Production, Properties, and Testing, 1998, New Jersey, William Andrew, 1.

[3] Fernandes CM, Senos AMR. Cemented carbide phase diagrams: a review. Int. J. Refract. Met. Hard Mater., 2011, 29(4): 405.

[4] Aristizabl M, Rodriguez N, Ibarreta F, Martinez R, Sanchez J M. Liquid phase sintering and oxidation resistance of WC-Ni-Co-Cr cemented carbides. Int. J. Refract. Met. Hard Mater., 2010, 28(4): 516.

[5] Ghasali E, Ebadzadeh T, Alizadeh M, Razavi M. Mechanical and microstructural properties of WC-based compositess: A comparative study on the effect of Ni and Mo binder phases. Ceram. Int., 2018, 44(2): 2283.

[6] Rong HY, Peng ZJ, Ren XY, Peng Y, Wang CB, Fu ZQ, Qi LH, Miao HZ. Ultrafine WC-Ni cemented carbides fabricated by spark plasma sintering. Mater. Sci. Eng. A, 2012, 532, 543.

[7] Zhao ZY, Liu JW, Tang HG, Ma XF, Zhao W. Investigation on the mechanical properties of WC-Fe-Cu hard alloys. J. Alloys Compd., 2015, 632, 729.

[8] Shao IJ, Na KI, Ko IY, Doh JM, Yoon JK. Effect of FeAl₃ on properties of (W, Ti)C-FeAl₃ hard materials consolidated by a pulsed current activated sintering method. Ceram. Int., 2012, 38(6): 5133.

[9] Chen CS, Yang CC, Chai HY, Yeh JW, Chau JLH. Novel composites material of WC/multi-element alloy. Int. J. Refract. Met. Hard Mater., 2014, 43, 200.

[10] Luo WY, Liu YZ, Luo Y, Wu M. Fabrication and characterization of WC-AlCoCrCuFeNi high-entropy alloy composites by spark plasma sintering. J. Alloys Compd., 2018, 754, 163.

[11] Velo IL, Gotor FJ, Alcal MD, Real C, Córdoba JM. Fabrication and characterization of HEA-WC cemented carbide based on the CoCrFeNiMn high-entropy alloy. J. Alloys Compd., 2018, 746, 1.

[12] Yeh JY, Chen SK, Lin SJ, Gan JY, Chin TS, Shun TT, Tsau CH, Chang SY. Nanostructured high-entropy alloy with multiple principal elements: Novel alloy design concepts and outcomes. Adv. Eng. Mater., 2004, 6(5): 299.

[13] Yang X, Zhang Y. Prediction of high-entropy stabilized solid-solution in multi-component alloys. Mater. Chem. Phys., 2012, 132(2–3): 233.

[14] Senkov O, Senkova SV, Woodward C. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloy. Acta Mater., 2014, 68, 214.

[15] Zhao P, Guo SB, Liu GH, Chen YX, Li JT. Fabrication of W-Cu functionally graded material with improved mechanical strength. J. Alloys Compd., 2014, 601, 289.

[16] Lia RX, Liaw PK, Zhang Y. Synthesis of ALCoCrFeNi high-entropy alloy by high-gravity combustion from oxides. Mater. Sci. Eng. A, 2017, 707, 668.

[17] Liu GH, Li JT, Chen KX. One-step preparation of dense TiC_1−xN_x-Ni₃Ti composites by combustion synthesis. Mater. Des., 2015, 87, 6.

[18] Liu GH, Li JT, Yang ZC, Guo SB, Chen YX. High-gravity combustion synthesis and in situ melt infiltration: A new method for preparing cemented carbides. Scripta Mater., 2013, 69(8): 642.

[19] Xu Y, Yang ZC, Zhao H, Liu GH, Li JT. Fabrication of Ni/WC composite with two distinct layers through centrifugal infiltration combined with a thermite reaction. Ceram. Int., 2014, 40(1): 1037.

[20] Zhao P, Guo S, Liu GH, Chen YX, Li JT. Fast fabrication of W-Cu functionally graded material by high-gravity combustion synthesis and melt-infiltration. J. Nucl. Mater., 2014, 445(1–3): 26.

[21] Martínez V, Echeberria J. Hot isostatic pressing of cubic boron nitrideetungsten carbide/cobalt (cBN-WC/Co) composites: Effect of cBN particle size and some processing parameters on their microstructure and properties. J. Am. Ceram. Soc., 2007, 90(2): 415.

[22] Pei J, Li JT, Liu GH, Chen KX. Fabrication of bulk Al₂O₃ by combustion synthesis melt-casting under ultra-high-gravity. J. Alloys Compd., 2009, 476(1–2): 854.

[23] Zhou R, Chen G, Liu B, Wang JW, Han LL, Liu Y. Microstructures and wear behaviour of (FeCoCrNi)_1−x(WC)_x high-entropy alloy composites. Int. J. Refract. Met. Hard Mater., 2018, 75, 56.