An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon

Abstract

In current underground mining, the stability of the exposed backfill face is a basic issue associated with mining design and has been the subject of considerable research in mining safety and efficiency. In this study, an improved analytical solution for evaluating the safety of vertically exposed faces in backfilling was proposed. Based on a differential slice method, the proposed solution emphasizes the arching effect as having the advantages of more rigor and wider scalability. Feasibility of the proposed solution was validated with classic centrifuge results. Good agreement between compared results indicated that the proposed solution skillfully predicts the behavior of the paste centrifuge model. Additionally, calculation of exposed face safety in sequential filling was presented. The proposed solution has practical significance in mine backfill design.

Keywords

mine safety / cemented paste backfill / exposed face / arching / sequential filling

References

[1] Li L, Aubertin M. Horizontal pressure on barricades for backfilled stopes. Part I: Fully drained conditions. Can. Geotech. J., 2009, 46, 37.

[2] Qi Chongchong, Fourie Andy. Cemented paste backfill for mineral tailings management: Review and future perspectives. Minerals Engineering, 2019, 144, 106025.

[3] Fahey M, Helinski M, Fourie A. Some aspects of the mechanics of arching in backfilled stopes. Can. Geotech. J., 2009, 46, 1322.

[4] Helinski M, Fahey M, Fourie A. Behavior of cemented paste backfill in two mine stopes: measurements and modeling. J. Geotech. Geoenviron. Eng., 2010, 137, 171.

[5] Hou C, Zhu WC, Yan BX, Guan K, Du JF. Influence of binder content on temperature and internal strain evolution of early age cemented tailings backfill. Constr. Build. Mater., 2018, 189, 585.

[6] Zhou N, Zhang JX, Yan H, Li M. Deformation behavior of hard roofs in solid backfill coal mining using physical models. Energies, 2017, 10, 557.

[7] Zhou N, Han X, Zhang J, Li M. Compressive deformation and energy dissipation of crushed coal gangue. Powder Technol., 2016, 297, 220.

[8] Belem T, Benzaazoua M. Design and application of underground mine paste backfill technology. Geotech. Geol. Eng., 2008, 26, 147.

[9] Mitchell RJ. Centrifuge model tests on backfill stability. Can. Geotech. J., 1986, 23, 341.

[10] Li L. Analytical solution for determining the required strength of a side-exposed mine backfill containing a plug. Can. Geotech. J., 2014, 51, 508.

[11] Thompson BD, Grabinsky MW, Bawden WF, Counter DB. In-situ measurements of cemented paste backfill in long-hole stopes. ROCKENG09: Proceedings of the 3rd CANUS Rock Mechanics Symposium, 2009 199

[12] Thompson BD, Bawden WF, Grabinsky MW. In situ measurements of cemented paste backfill at the Cayeli Mine. Can. Geotech. J., 2012, 49, 755.

[13] Fahey M, Helinski M, Fourie A. Development of specimen curing procedures that account for the influence of effective stress during curing on the strength of cemented mine backfill. Geotech. Geol. Eng., 2011, 29, 709.

[14] Fourie A, Helinski M, Fahey M. Using effective stress theory to characterize the behaviour of backfill. CIM MAG., 2007, 100, 27

[15] Helinski M, Fahey M, Fourie A. Coupled two-dimensional finite element modelling of mine backfilling with cemented tailings. Can. Geotech. J., 2010, 47, 1187.

[16] Morgenstern NR, Price VE. A numerical method for solving the equations of stability of general slip surfaces. Comput. J., 1967, 9, 388.

[17] Chen ZY, Morgenstern NR. Extensions to the generalized method of slices for stability analysis. Can. Geotech. J., 1983, 20, 104.

[18] Mitchell RJ, Olsen RS, Smith JD. Model studies on cemented tailings used in mine backfill. Can. Geotech. J., 1982, 19, 14.

[19] Helinski M. Mechanics of Mine Backfill, 2007, Perth, University of Western Australia

[20] Li L, Aubertin M. An improved analytical solution to estimate the stress state in subvertical backfilled stopes. Can. Geotech. J., 2008, 45, 1487.

[21] Li L, Aubertin M. A modified solution to assess the required strength of exposed backfill in mine stopes. Can. Geotech. J., 2012, 49, 994.

[22] Zou S, Nadarajah N. Optimizing backfill design for ground support and cost saving. Golden Rocks 2006, The 41st US Symposium on Rock Mechanics (USRMS), 2006

[23] Dirige APE, McNearny RL, Thompson DS. The effect of stope inclination and wall rock roughness on back-fill free face stability. Rock Engineering in Difficult Conditions: Proceedings of the 3rd Canada-US Rock Mechanics Symposium, 2009

[24] Dirige APE, De Souza E. Engineering design of backfill systems in adjacent pillar mining. The 42nd US Rock Mechanics Symposium (USRMS), 2008

[25] Aubertin M, Li LSTBM, Arnoldi S, Belem T, Bussière B, Benzaazoua M, Simon R. Interaction between backfill and rock mass in narrow stopes. Soil rock Am., 2003, 1, 1157

[26] McCarthy DF. Essentials of Soil Mechanics and Foundations, 1977, Reston, Reston Publishing Company, 505

[27] Yan B, Zhu W, Hou C, Guan K. A three-dimensional analytical solution to the arching effect in inclined backfilled stopes. Geomech. Geoeng., 2019, 14, 136.

[28] Smith JD, Dejongh CL, Mitchell RJ. Large scale model tests to determine backfill strength requirements for pillar recovery at the Black Mountain Mine. Proceedings of International Symposium on Mining With Backfill, 1983 7

[29] Terzaghi K. Theoretical Soil Mechanics, 1944, New York, Limited John Wiler And Sons. Inc

[30] Schofield AN. Use of centrifugal model testing to assess slope stability. Can. Geotech. J., 1978, 15, 14.

[31] Chen QS, Zhang QL, Fourie A, Chen X, Qi CC. Experimental investigation on the strength characteristics of cement paste backfill in a similar stope model and its mechanism. Constr. Build. Mater., 2017, 154, 34.

[32] Mitchell RJ. Model studies on the stability of confined fills. Can. Geotech. J., 1989, 26, 210.

[33] Yi XW, Ma GW, Fourie A. Centrifuge model studies on the stability of fibre-reinforced cemented paste backfill stopes. Geotext. Geomembr., 2018, 46, 396.