Effect of austempering time on microstructure and properties of a low-carbon bainite steel

Abstract

The effect of austempering time after the bainitic transformation on the microstructure and property in a low-carbon bainite steel was investigated by metallography and dilatometry. The results showed that by prolonging the austempering time after the bainite transformation, the amount of large-size martensite/austenite islands decreased, but no significant change of the amount and morphology of bainite were observed. In addition, more austenite with a high carbon content was retained by prolonging the holding time at the bainite transformation temperature. Moreover, with a longer holding time, the elongation was improved at the expense of a small decrease in tensile strength. Finally, the Avrami equation B _RF = 1− exp(−0.0499 × t ^0.7616) for bainite reaction at 350°C was obtained for the tested steel. The work provided a reference for tailoring the properties of low-carbon steels.

Keywords

austempering time / retained austenite / martensite/austenite island / low-carbon bainite / transformation kinetics

References

[1] Bhadeshia HKDH. Bainite in Steels, 2001, 2nd ed., London, IOM Communications Ltd.

[2] Aaronson HI, Furuhara T, Rigsbee JM, Reynolds WT, Howe JM. Crystallographic and mechanistic aspects of growth by shear and by diffusional processes. Metall. Trans. A, 1990, 21(9): 2369.

[3] Lawrynowicz Z, Barbacki A. Features of bainite transformation in steels. Adv. Mater. Sci., 2002, 2(1): 5

[4] Ohmori Y. Bainite transformations in extremely low carbon steels. ISIJ Int., 1995, 35(8): 962.

[5] Bhadeshia HKDH. The bainite transformation: Uneesolved issues. Mater. Sci. Eng. A, 1999, 273–275, 58.

[6] Hillert M. Paradigm shift for bainite. Scripta Mater., 2002, 47(3): 175.

[7] Borgenstam A, Hillert M, Ågren J. Metallographic evidence of carbon diffusion in the growth of bainite. Acta Mater., 2009, 57(11): 3242.

[8] Steel Res. Int., 2019, 90(3) art No. 1800474

[9] Yao ZS, Xu G, Hu HJ, Yuan Q, Tian JY, Zhou MX. Effect of Ni and Cr addition on transformation and properties of low-carbon bainitic steels. Trans. Indian Inst. Met., 2019, 72(5): 1167.

[10] Tian JY, Xu G, Zhou MX, Hu HJ, Xue ZL. Effects of Al addition on bainite transformation and properties of high-strength carbide-free bainitic steels. J. Iron Steel Res. Int., 2019, 26(8): 846.

[11] Hu HJ, Xu G, Wang L, Xue ZL, Zhang YL, Liu GH. The effects of Nb and Mo addition on transformation and properties in low carbon bainitic steels. Mater. Des., 2015, 84, 95.

[12] Wang XD, Huang BX, Wang L, Rong YH. Microstructure and mechanical properties of microalloyed high-strength transformation-induced plasticity steels. Metall Mater. Trans., 2008, 39(1): 1.

[13] Heller T, Nuss A. Effect of alloying elements on microstructure and mechanical properties of hot rolled multiphase steels. Ironmaking Steelmaking, 2005, 32(4): 303.

[14] Tian JY, Xu G, Zhou MX, Hu HJ, Wan XL. The Effects of Cr and Al addition on transformation and properties in low-carbon bainitic steels. Metals, 2017, 7(2): 40.

[15] Yang ZN, Chu CH, Jiang F, Qin YM, Long XY, Wang SL, Chen D, Zhang FC. Accelerating nano-bainite transformation based on a new constructed microstructural predicting model. Mater. Sci. Eng. A, 2019, 748, 16.

[16] Gao GH, Zhang H, Gui XL, Luo P, Tan ZL, Bai BZ. Enhanced ductility and toughness in an ultrahigh-strength Mn-Si-Cr-C steel: the great potential of ultrafine filmy retained austenite. Acta Mater., 2014, 76, 425.

[17] Steel Res. Int., 2018, 89(4) art No. 1700469

[18] Huang YY, Li QG, Huang XF, Huang WG. Effect of bainitic isothermal transformation plus Q&P process on the microstructure and mechanical properties of 0.2C bainitic steel. Mater. Sci. Eng. A, 2016, 678, 339.

[19] Huang XF, Liu WL, Huang YY, Chen H, Huang WG. Effect of a quenching-long partitioning treatment on the microstructure and mechanical properties of a 0.2C% bainitic steel. J. Mater. Process. Technol., 2015, 222, 181.

[20] Li QG, Huang XF, Huang WG. Fatigue property and microstructure deformation behavior of multiphase microstructure in a medium-carbon bainite steel under rolling contact condition. Int. J. Fatigue, 2019, 125, 381.

[21] Hu HJ, Xu G, Zhou MX, Yuan Q. New insights to the promoted bainitic transformation in prior deformed austenite in a Fe-C-Mn-Si alloy. Met. Mater. Int., 2017, 23(2): 233.

[22] Gong W, Tomota Y, Adachi Y, Paradowska AM, Kelleher JF, Zhang SY. Effects of ausforming temperature on bainite transformation, microstructure and variant selection in nanobainite steel. Acta Mater., 2013, 61(11): 4142.

[23] He JG, Zhao AM, Zhi C, Fan HL. Acceleration of nanobainite transformation by multi-step ausforming process. Scripta Mater., 2015, 107, 71.

[24] Hu HJ, Xu G, Dai FQ, Tian JY, Chen GH. Critical ausforming temperature to promote isothermal bainitic transformation in prior-deformed austenite. Mater. Sci. Technol., 2019, 35(4): 420.

[25] Zou H, Hu HJ, Xu G, Xiong ZL, Dai FQ. Combined effects of deformation and undercooling on isothermal bainitic transformation in an Fe-C-Mn-Si alloy. Metals, 2019, 9(2): 138.

[26] Morales-Rivas L, Yen HW, Huang BM, Kuntz M, Caballero FG, Yang JR, Garcia-Mateo C. Tensile response of two nanoscale bainite composite-like structures. JOM, 2015, 67(10): 2223.

[27] Zhao LJ, Qian LH, Meng JY, Qian Z, Zhang FC. Below-Ms austempering to obtain refined bainitic structure and enhanced mechanical properties in low-C high-Si/Al steels. Scripta Mater., 2016, 112, 96.

[28] Hu ZW, Xu G, Zhang C, Hu HJ. Research on continuous cooling transformation curve of a C-Si-Mn steel. Appl. Mech. Mater., 2014, 562, 404.

[29] Wang CY, Shi J, Cao WQ, Dong H. Characterization of microstructure obtained by quenching and partitioning process in low alloy martensitic steel. Mater. Sci. Eng. A, 2010, 527(15): 3442.

[30] Lin LI, Cooman BCD, Wollants P, Yanlin HE, Zhou X. Effect of aluminum and silicon on transformation induced plasticity of the TRIP steel. Mater. Sci. Technol., 2004, 20(2): 135

[31] Jeong WC. Effect of silicon content and annealing temperature on formation of retained austenite and mechanical properties in multi-phase steels. Met. Mater. Int., 2003, 9(2): 179.

[32] Sugimoto KI. Fracture strength and toughness of ultra high strength TRIP aided steels. Mater. Sci. Technol., 2009, 25(9): 1108.

[33] Jacques P, Girault E, Catlin T, Geerlofs N, Kop T, van der Zwaag S, Delannay F. Bainite transformation of low carbon Mn-Si TRIP-assisted multiphase steels: influence of silicon content on cementite precipitation and austenite retention. Mater. Sci. Eng. A, 1999, 275, 475.

[34] Peet M, Babu SS, Miller MK, Bhadeshia HKDH. Three-dimensional atom probe analysis of carbon distribution in low-temperature bainite. Scripta Mater., 2004, 50(10): 1277.

[35] Pereloma EV, Timokhina IB, Miller MK, Hodgson PD. Three-dimensional atom probe analysis of solute distribution in thermomechanically processed trip steels. Acta Mater., 2007, 55(8): 2587.

[36] Caballero FG, Miller MK, Clarke AJ, Garcia-Mateo C. Examination of carbon partitioning into austenite during tempering of bainite. Scripta Mater., 2010, 63(4): 442.

[37] Timokhina IB, Xiong XY, Beladi H, Mukherjee S, Hodgson PD. Three-dimensional atomic scale analysis of microstructures formed in high strength steels. Mater. Sci. Technol., 2011, 27(4): 739.

[38] Prasad SN, Saxena A, Sodhi MMS, Tripathi PN. Influence of different heat treatment parameters on microstructure and mechanical properties of C-Mn strapping quality steels. Mater. Sci. Eng. A, 2008, 476(1–2): 126.

[39] Caballero FG, Garcia-Mateo C, Santofimia MJ, Miller MK, Andrés CGD. New experimental evidence on the incomplete transformation phenomenon in steel. Acta Mater., 2009, 57(1): 8.