Surface microtopography and micromechanics of various rank coals

Abstract

For a long time, coalbed gas has brought about various problems to the safety of coal mine production. In addition, the mining of gas and coalbed methane (CBM) has attracted much attention. The occurrence and migration of CBM are believed to be closely related to the micro-surface properties of coal. To further explore the characteristics of CBM occurrence and migration, in this study, the micro-surface topography, adhesion, and elastic modulus of five metamorphic coals were measured by atomic force microscopy (AFM). The results show that the microtopography of coal fluctuates around 40 nm, reaching a maximum of 66.5 nm and the roughness of the surface decreases with the increase of metamorphism. The elastic modulus of coal micro-surface varies from 95.40 to 9626.41 MPa, while the adhesion varies from 15.08 to 436.22 nN, and they both exhibit a trend of “M” shape with the increase of metamorphism. Furthermore, a high correlation exists between adhesion and microtopography fluctuation. In most cases, the adhesion is larger in the concavity area and smaller in the convexity area. The research results may provide a new method for revealing the occurrence and migration of CBM and ensure efficient and safe CBM exploitation.

Keywords

coal / atomic force microscopy / microtopography / adhesion / elastic modulus

References

[1] C W, B.B L, Q.M L, J.C W. Has China’s coal consumption already peaked? A demand-side analysis based on hybrid prediction models. Energy, 2018, 162, 272

[2] J X, H T, S S, J.W L, K X, K Q, Y W, Y.B Z, S H, A.C Z, J X. A study of the relationships between coal structures and combustion charac teristics: The insights from micro-Raman spectroscopy based on 32 kinds of Chinese coals. Appl. Energy, 2018, 212, 46

[3] Y H, Z.Y Z, H L, Y.M W. China’s farewell to coal: A forecast of coal consumption through 2020. Energy Policy, 2015, 86, 444

[4] P C, J L. Coalbed methane resources assessment in Asturias (Spain). Int. J. Coal Geol., 2010, 83, 366

[5] C.O K, E O. Adsorption and gas transport in coal microstructure: investigation and evaluation by quantitative X-ray CT imaging. Fuel, 2001, 80, 509

[6] B.S N, P.H F, X.C L. Quantitative investigation of anisotropic characteristics of methane-induced strain in coal based on coal particle tracking method with X-ray computer tomography. Fuel, 2018, 214, 272

[7] W.T Y, G F, C Y, Z.A J, K Z, Y G. Fatal gas explosion accidents on Chinese coal mines and the characteristics of unsafe behaviors: 2000−2014. Saf. Sci., 2017, 92, 173

[8] J.J F-D, C G-N, M.I A- F, F L-G. Analysis of gas-dynamic phenomenon in underground coal mines in the central basin of Asturias (Spain). Eng. Fail. Anal., 2013, 34, 464

[9] M.B.D A, C.G N. Control and prevention of gas outbursts in coal mines, Riosa–Olloniego coalfield, Spain. Int. J. Coal Geol., 2007, 69, 253

[10] Y.P C, H.F W, L W. Theories and Engineering Applications on Coal Mine Gas Control, 2010, Xuzhou, China University of Mining and Technology Press, 36

[11] Y Q. Advances in overseas geological research on coalbed gas: Origin and reservoir characteristics of coalbed gas. Earth Sci. Front., 2005, 12, 289

[12] B.Y W, Y Q, J S, Q.S Z, G W. Pore structure characteristics of low- and medium-rank coals and their differential adsorption and desorption effects. J. Pet. Sci. Technol., 2018, 165, 1

[13] B.S N, X.F L, L.L Y, J.Q M, X.C L. Pore structure characterization of different rank coals using gas adsorption and scanning electron microscopy. Fuel, 2015, 158, 908

[14] F W, Y.P C, S.Q L, K J, W Z. Influence of coalification on the pore characteristics of middle–high rank coal. Energy Fuels, 2014, 28, 5729

[15] X.F L, B.S N, W.X W, Z.P W, L Z. The use of AFM in quantitative analysis of pore characteristics in coal and coal-bearing shale. Mar. Pet. Geol., 2019, 105, 331

[16] X.H S, J.N P, Q.L H, Y J, Z.Z W, Q.H N, M L. Micrometer-scale fractures in coal related to coal rank based on micro-CT scanning and fractal theory. Fuel, 2018, 212, 162

[17] H.G H, K.J K, D.E L, R.A G, M A, M.J A, S.M P. Properties of biomolecules measured from atomic force microscope images: a review. J. Struct. Biol., 1997, 119, 99

[18] Z.Y G, Y.H H, W S, J.W D. Surface- charge anisotropy of scheelite crystals. Langmuir, 2016, 32, 6282

[19] N K, C.L Z, A K, van den D E, F M, I S. Characterization of the surface charge distribution on kaolinite particles using high resolution atomic force microscopy. Geochim. Cosmochim. Acta, 2016, 175, 100

[20] Y T, J.M Y, Y.F L, Y K. Characterization of nanoscale deformation in a discontinuously reinforced titanium composite using AFM and nanolithography. Scripta Mater., 2007, 56, 209

[21] X.Q H, X.F L, D.Z S, B.S N. Effect of microstructure on electrical property of coal surface. Appl. Surf. Sci., 2019, 483, 713

[22] L.E B, G.W M, M.V S. Mechanical heterogeneity of dentin at different length scales as determined by AFM phase contrast. Micron, 2012, 43, 1364

[23] A B, L.M M, G H. Localization factor: a new parameter for the quantitative characterization of surface structure with atomic force microscopy (AFM). Micron, 2012, 43, 305

[24] J.N P, H.T Z, Q.L H, H.C W, S W. Macromolecular and pore structures of Chinese tectonically deformed coal studied by atomic force microscopy. Fuel, 2015, 139, 94

[25] S.P Y, K J, K Z, W.X H, H D, M.C L, W.M P. An atomic force microscopy study of coal nanopore structure. Chin. Sci. Bull., 2011, 56, 2706

[26] S.Q W, S.M L, Y.B S, D J, X.M Z. Investigation of coal components of Late Permian different ranks bark coal using AFM and Micro-FTIR. Fuel, 2017, 187, 51

[27] J.X L, X.M J, X.Y H, S.H W. Morphological characterization of super fine pulverized coal particle. Part 2. AFM investigation of single coal particle. Fuel, 2010, 89, 3884

[28] P T, J K, U V. On the use of peak-force tapping atomic force microscopy for quantification of the local elastic modulus in hardened cement paste. Cem. Concr. Res., 2012, 42, 215

[29] Young T J, Monclus M A, Burnett T L, Broughton W R, Ogin S L, Smith P A. The use of the PeakForceTMquantitative nanomechanical mapping AFM-based method for high-resolution Young's modulus measurement of polymers. Measurement Science and Technology, 2011, 22(12): 125703

[30] O.D.S F, E G, de D G, H F. Adhesion experiments using an AFM—Parameters of influence. Appl. Surf. Sci., 2010, 257, 48

[31] Y.J J, K.T T. Measurement of the strength and range of adhesion using atomic force microscopy. Extreme Mech. Lett., 2016, 9, 119

[32] Ma WB, Qi CL, Liu Q, Ding YH, Zhu W. Adhesion force measurements between deep-sea soil particles and metals by in situ AFM. Appl. Clay Sci, 2017, 148, 118

[33] Smolyakov G, Pruvost S, Cardoso L, Alonso B, Belamie E, Duchet-Rumeau J. AFM PeakForce QNM mode: Evidencing nanometre-scale mechanical properties of chitin- silica hybrid nanocomposites. Carbohydr. Polym., 2016, 151, 373

[34] Jiang DY, Tian CG, Liu QF, Zhao M, Qin JM, Hou JH, Gao S, Liang QC, Zhao JX. Young’s modulus of individual ZnO nanowires. Mater. Sci. Eng. A, 2014, 610, 1

[35] Haba D, Kaufmann J, Brunner AJ, Resch K, Teichert C. Observation of elastic modulus inhomogeneities in thermosetting epoxies using AFM-Discerning facts and artifacts. Polymer, 2014, 55, 4032

[36] Lin LY, Kim DE. Measurement of the elastic modulus of polymeric films using an AFM with a steel micro-spherical probe tip. Polym. Test., 2012, 31, 926

[37] Pittenger B, Erina N, Su CM. Quantitative Mechanical Property Mapping at the Nanoscale with PeakForce QNM, Application Note Veeco Instruments Inc, 2010 1

[38] Zhang H, Huang JX, Wang YW, Liu R, Huai XL, Jiang JJ, Anfuso C. Atomic force microscopy for two-dimensional materials: A tutorial review. Opt. Commun., 2018, 406, 3

[39] Hafner JH, Cheung CL, Woolley AT, Lieber CM. Structural and functional imaging with carbon nanotube AFM probes. Prog. Biophys. Mol. Biol., 2001, 77, 73

[40] Gadelmawla ES, Koura MM, Maksoud TMA, Elewa IM, Soliman HH. Roughness parameters. J. Mater. Process. Technol., 2002, 123, 133

[41] Zhou FB, Liu SQ, Pang YQ, Li JL, Xin HH. Effects of coal functional groups on adsorption microheat of coal bed methane. Energy Fuels, 2015, 29, 1550

[42] He XQ, Liu XF, Nie BS, Song DZ. FTIR and Raman spectroscopy characterization of functional groups in various rank coals. Fuel, 2017, 206, 555

[43] Liu XF, Song DZ, He XQ, Nie BS, Wang LK. Insight into the macromolecular structural differences between hard coal and deformed soft coal. Fuel, 2019, 245, 188

[44] Garner-O’Neale LD, Bonamy AF, Meek TL, Patrick BG. Calculating group electronegativities using the revised Lewis-Langmuir equation. J. Mol. Struc. THEOCHEM, 2003, 639, 151

[45] Levine JR. Influences of coal composition on coal seam reservoir quality: a review. Symposium on Coalbed Methane Research and Development in Australia, 1992 19

[46] Huang L, Fang HW, Chen MH, Zhao HM. Review of surface charge characteristics of fine sediments. J. Tsinghua Univ. Sci. Technol., 2012, 52, 747