Long-term mechanical behavior and characteristics of cemented tailings backfill through impact loading

Abstract

Cemented tailings backfill (CTB) structures are important components of underground mine stopes. It is important to investigate the characteristics and dynamic behavior of CTB materials because they are susceptible to disturbance by dynamic loading, such as excavation and blasting. In this study, the authors present the results of a series of Split-Hopkinson pressure bar (SHPB) single and cyclic impact loading tests on CTB specimens to investigate the long-term dynamic mechanical properties of CTB. The stress-strain relationship, dynamic strength, and dynamic failure characteristics of CTB specimens are analyzed and discussed to provide valuable conclusions that will improve our knowledge of CTB long-term mechanical behavior and characteristics. For instance, the dynamic peak stress under cyclic impact loading is approximately twice that under single impact loading, and the CTB specimens are less prone to fracture when cyclically loaded. These findings and conclusions can provide a new set of references for the stability analysis of CTB materials and help guide mine designers in reducing the amount of binding agents and the associated mining cost.

Keywords

cyclic impact loading / cemented tailings backfill / dynamic mechanical properties / Split-Hopkinson pressure bar / dynamic peak stress

References

[1] He MC, Xie HP, Peng SP, Jiang YD. Study on rock mechanics in deep mining engineering. Chin. J. Rock Mech. Eng., 2005, 24(16): 2803

[2] Wang Q, Ren FY. Mining Science, 2011, Beijing, Metallurgical Industry Press, 327

[3] Hassani FP, Mortazavi A, Shabani M. An investigation of mechanisms involved in backfill-rock mass behavior in narrow vein mining. J. South Afr. Inst. Min. Metall., 2008, 108(8): 463

[4] Rankine R, Pacheco M, Sivakugan N. Underground mining with backfills. Soils Rocks, 2007, 30(2): 93

[5] Miao XX, Zhang JX, Guo GL. Study on waste backfilling method and technology in fully mechanized coal mining. J. Chin. Coal Soc., 2010, 35(1): 1

[6] Benzaazoua M, Bussière B, Demers I, Aubertin M, Fried E, Blier A. Integrated mine tailings management by combining environmental desulphurization and cemented paste backfill, Application to mine Doyon, Quebec, Canada. Miner. Eng., 2008, 21(4): 330.

[7] Yang L, Qiu JP, Jiang HQ, Hu SQ, Li H, Li SB. Use of cemented super-fine unclassified tailings backfill for control of subsidence. Minerals, 2017, 7, 216.

[8] Zhang JX, Li BY, Zhou N, Zhang Q. Application of solid backfilling to reduce hard-roof caving and longwall coal face burst potential. Int. J. Rock Mech. Min. Sci., 2016, 88, 197.

[9] Deng DQ, Liu L, Yao ZL, Song KI, Lao DZ. A practice of ultra-fine tailings disposal as filling material in a gold mine. J. Environ. Manage., 2017, 196, 100.

[10] Ke X, Hou H, Zhou M, Wang Y, Zhou X. Effect of particle gradation on properties of fresh and hardened cemented paste backfill. Constr. Build. Mater., 2015, 96, 378.

[11] Khoshand A, Fall M. Geotechnical characterization of peat-based landfill cover materials. J. Rock Mech. Geotech. Eng., 2016, 8(5): 596.

[12] Liang C, Fall M. Mechanical and thermal properties of cemented tailings materials at early ages: Influence of initial temperature, curing stress and drainage conditions. Constr. Build. Mater., 2016, 125, 553.

[13] Dong L, Gao Q, Nan SQ, Du JQ. Performance and hydration mechanism of new super fine cemented whole-tailings backfilling materials. J. Cent. South Univ., 2013, 44(4): 1571

[14] Sun JH, Dou YM, Zhou J, Li B. Experimental study on the affect to compressive property of concrete caused by strain rate. China Concr. Cem. Prod., 2011, 5, 1

[15] Liu ZX, Li XB. Research on stability of high-level backfill in blasting. Min. Metall. Eng., 2004, 24(3): 21

[16] Li N, Zhou KP, Pan D, Zhu HL. Study on intensity response of rubble backfill to dynamical loading of medium-length hole blasting. Min. Metall. Eng., 2011, 31(4): 9

[17] Zhang QL, Yang W, Yang S, Wang XM. Test research on stability of high-density total tailing cemented backfilling under dynamical loading. Chin. Saf. Sci. J., 2015, 25(3): 78

[18] Zhao GY, Wu H, Chen Y, Xu ZW, Li ZY. Experimental study on load-bearing mechanism and compaction characteristics of mine filling materials. J. Chin. Univ. Min. Technol., 2017, 6, 1251

[19] Xu WB, Tian XC, Cao PW. Assessment of hydration process and mechanical properties of cemented paste backfill by electrical resistivity measurement. Nondestr. Test. Eval., 2018, 33(2): 198.

[20] Xu WB, Cao PW, Tian MM. Strength development and microstructure evolution of cemented tailings backfill containing different binder types and contents. Minerals, 2018, 8(4): 167.

[21] Cao S, Song WD, Yilmaz E. Influence of structural factors on uniaxial compressive strength of cemented tailings backfill. Constr. Build. Mater., 2018, 174, 190.

[22] Cao S, Song WD. Effect of filling interval time on the mechanical strength and ultrasonic properties of cemented coarse tailing backfill. Int. J. Miner. Process., 2017, 166, 62.

[23] Yilmaz E. Investigating the Hydro-geotechnical and Microstructural Properties of Cemented Paste Backfills Using the Versatile CUAPS Apparatus [Dissertation], 2010, Rouyn-Noranda, QC, Université du Québec en Abitibi-Témiscamingue UQAT, 1

[24] Chen RJ, Liu HW, Zeng R. SHPB dynamical experiment on silica fume concrete. Adv. Mater. Res., 2013, 631–632, 771.

[25] Dai J. Dynamical Behaviors and Blasting Theory of Rock, 2002, Beijing, Metallurgical Industry Press, 60

[26] Fairhurst CE, Hudson JA. Draft ISRM suggested method for the complete stress-strain curve for intact rock in uniaxial compression. Int. J. Rock Mech. Min. Sci., 1999, 36(3): 279.

[27] Xu JY, Fan JS, Lv XC. Dynamical Mechanical Properties of Rock with the Confining Pressure, 2012, Xi’an, Northwestern Polytechnical University Press, 56

[28] Peng SC, Chen CC, Xu J, Zhang HL, Tang Y, Nie W, Zhao K. Loading rate dependency of rock stress-strain curve based on Brazil splitting test. Chin. J. Rock Mech. Eng., 2018, 37(Supp.1): 3247

[29] Gong FQ, Li XB, Rao QH, Liu XL. Reference method for determining sample size in SHPB tests of rock materials. J. Vib. Shock, 2013, 32(17): 24

[30] Pan Z, Sanjayan JG, Rangan BV. Fracture properties of geopolymer paste and concrete. Mag. Concr. Res., 2011, 63(10): 763.

[31] Mastali M, Dalvand A. The impact resistance and mechanical properties of self-compacting concrete reinforced with recycled CFRP pieces. Compos. Part B, 2016, 92, 360.

[32] Liu JZ, Xu JY, Lu XC. Experimental study on dynamical mechanical properties of amphibolies under impact compressive loading. Chin. J. Rock Mech. Eng., 2009, 28(10): 2113

[33] Ouellet S, Bussière B, Aubertin M, Benzaazoua M. Microstructural evolution of cemented paste backfill: Mercury intrusion porosimetry test results. Cem. Concr. Res., 2007, 37(12): 1654.

[34] Wang SS, Zhang MH, Quest ST. Effect of sample size on static strength and dynamical increase factor of high-strength concrete from SHPB test. J. Test. Eval., 2011, 39(5): 10

[35] Li XB, Gong FQ, Gao K, Zhao J, Yin SB. Test study of impact failure of rock subjected to one-dimensional coupled static and dynamic loads. Chin. J. Rock Mech. Eng., 2010, 29(2): 251

[36] Tan YY, Wang J, Song WD, Xu LH, Cao S. Experimental study on mechanical properties of cemented tailings backfill under cycle dynamic loading test. J. Min. Saf. Eng., 2019, 1(36): 184

[37] Li P, Ren FH, Cai MF, Guo QF, Wang HF, Liu K. Investigating the mechanical and acoustic emission characteristics of brittle failure around a circular opening under uniaxial loading. Int. J. Miner. Metall. Mater., 2019, 26(10): 1217.

[38] Jiao HZ, Wang SF, Wu AX, Shen HM, Wang JD. Cementitious property of NaAlO₂-activated Ge slag as cement supplement. Int. J. Miner. Metall. Mater., 2019, 26(12): 1594.

[39] Tan YY, Yu X, Song WD, Wang HP, Cao S. Experimental study on combined pressure-bearing mechanism of filling body and surrounding rock. J. Min. Saf. Eng., 2018, 5(35): 1071

[40] Tan YY, Yu X, Elmo D, Xu LH, Song WD. Experimental study on dynamic mechanical property of cemented tailings backfill under SHPB impact loading. Int. J. Miner. Metall. Mater., 2019, 26(4): 404.

[41] Xu WB, Cao Y, Liu BG. Strength efficiency evaluation of cemented tailings backfill with different stratified structures. Eng. Struct., 2019, 180, 18.

[42] Fu JX, Du CF, Song WD. Strength sensitivity and failure mechanism of full tailings cemented backfills. J. Univ. Sci. Technol. Beijing, 2014, 36(9): 1149

[43] Deng DQ, Yang YL, Yao ZL. Research on constitutive equation of damage evolution of backfill based on the full tensile and compressive process. J. Min. Saf. Eng., 2007, 23(4): 485

[44] Li YF, Zhang JM, Deng F, Bai SW. Experimental study on strength characteristics of tailings cement backfilling at deep-seated mined-out eare. Rock Soil Mech., 2005, 26(6): 865

[45] Liu C, Han B, Sun W, Wu JX, Yao S, Hu HY. Experimental study of strength of backfilling of cemented rock debris and its application under low temperature condition. Chin. J. Rock Mech. Eng., 2015, 34, 139

[46] Zhao X, Fourie A, Qi CC. An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon. Int. J. Miner. Metall. Mater., 2019, 26(10): 1206.