Influence of ZnO nanoparticles on the microstructure of a CoCrFeMoNi matrix via powder metallurgy

Abstract

In the last decade, extensive research has been carried out on the microstructural behavior of high-entropy alloys (HEA), for which the in-situ formation of nanoparticles has been reported. However, studies of the incorporation of nanoparticles in HEA have been rarely reported. In this work, the addition of zinc oxide nanoparticles (ZnO NP) as reinforcement in a CoCrFeMoNi high-entropy alloy matrix, as well as the morphological, structural, and microstructural evolution of composites synthesized via powder metallurgy, were studied. Scanning electron microscopy and X-ray diffraction analysis were performed in order to study the microstructural and phase characterization of the composites. After sintering, it was found that the ZnO NP addition (0.5wt%, 1wt% and 2wt%) had a significant influence on the micro-structure and hardness of the CoCrFeMoNi high-entropy alloy. Stronger bonding among metal particles was promoted with the additions of ZnO NP. A reduction in porosity as a function of ZnO NP content was also observed. The microhardness results showed that the composite reached its highest reinforcement in bulk samples with 1wt% ZnO NP (HV 870), which represented a 20% improvement over the unrein-forced HEA matrix.

Keywords

high-entropy alloy / mechanical alloying / nanoparticles / composites

References

[1] Ashwath P, Xavior MA. Processing methods and property evaluation of Al₂O₃ and SiC reinforced metal matrix composites based on aluminum 2xxx alloys. J. Mater. Res., 2016, 31, 1.

[2] Khan MA, Madhu GM, Sailaja RRN. Reinforcement of polymethyl methacrylate with silane-treated zinc oxide nanoparticles: fire retardancy, electrical and mechanical properties. Iran. Polym. J., 2017, 26, 1.

[3] Suntako R. Effect of zinc oxide nanoparticles synthesized by a precipitation method on mechanical and morphological properties of the CR foam. Bull. Mater. Sci., 2015, 38, 1.

[4] Wacharawichanant S, Saetun P, Lekkong T, Thongyai S, Praserthdam P. Effect of poly(styrene-co-maleic anhydride) compatibilizer on properties of polystyrene/zinc oxide composites. Iran. Polym. J., 2012, 21, 1.

[5] Fatile BO, Adewuyi BO, Owoyemi HT. Synthesis and characterization of ZA-27 alloy matrix composites reinforced with zinc oxide nanoparticles. Eng. Sci. Technol. Int. J., 2017, 20, 1

[6] El-Wazery MS, Elsad RA, Khafagy SM, Meiz MM. Enhancement of microstructure and mechanical properties of hypereutectic Al-16%Si alloy by ZnO nanocrystallites. Appl. Phys. A, 2018, 124, 1.

[7] Tekumalla S, Farhan N, Srivatsan TS, Gupta M. Nano-ZnO particles' effect in improving the mechanical response of Mg-3Al-0.4Ce alloy. Metals, 2016, 6, 1.

[8] Shun TT, Hung CH, Lee CF. Formation of ordered/disordered nanoparticles in FCC high entropy alloys. J. Alloys Compd., 2010, 493, 1.

[9] Shun TT, Hung CH, Lee CF. The effects of secondary elemental Mo or Ti addition in Al0.3CoCrFeNi high-entropy alloy on age hardening at 700°C. J. Alloys Compd., 2010, 495, 1.

[10] Shun TT, Du YC. Microstructure and tensile behaviors of FCC Al_0.3CoCrFeNi high entropy alloy. J. Alloys Compd., 2009, 479, 1.

[11] Sheng HF, Gong M, Peng LM. Microstructural characterization and mechanical properties of an Al0.5CoCrFeCuNi high-entropy alloy in as-cast and heat-treated/quenched conditions. Mater. Sci. Eng. A, 2013, 567, 1.

[12] Liu XY, Yin HBC, Xu Y. Microstructure, Mechanical and tribological properties of oxide dispersion strengthened high-entropy alloys. Materials, 2017, 10, 1

[13] Prasad H, Singh S, Panigrahi BB. Mechanical activated synthesis of alumina dispersed FeNiCoCrAlMn high entropy alloy. J. Alloys Compd., 2017, 692, 1.

[14] Agarwal H, Kumar SV, Rajeshkumar S. A review on green synthesis of zinc oxide nanoparticles - An eco-friendly approach. Resour.-Effic. Technol., 2017, 3, 1.

[15] de León CLD, Olivas-Armendariz I, Hernanández Paz JF, Gómez-Esparza CD, Velasco-Santos C, Rive-ra-Armenta JL, Rodríguez-González CA, de Materiales T. Synthesis by sol-gel and cytotoxicity of zinc oxide nanopar-ticles using wasted alkaline batteries. Dig. J. Nanomater. Bios., 2017, 12, 1

[16] Staltsov MS, Chernov II, Bogachev IA, Kalin BA, Olevsky EA, Lebedeva LJ, Nikitina AA. Optimization of mechanical alloying and spark-plasma sintering regimes to obtain ferrite-martensitic ODS steel. Nucl. Mater. Energy, 2016, 9, 1.

[17] Tsai KY, Tsai MH, Yeh JW. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys. Acta Mater., 2013, 61, 1.

[18] Marsalek R. Particle size and zeta potential of ZnO. APC-BEE Procedia, 2014, 9, 1.

[19] Qi WH. Size effect on melting temperature of nanosolids. Phys. B, 2005, 368, 1.

[20] Nassar AE, Nassar EE. Properties of aluminum matrix nano composites prepared by powder metallurgy processing. J. King Saud Univ.-Eng. Sci., 2017, 29, 1.

[21] Estrada-Guel I, Carreño-Gallardo C, Mendoza-Ruiz DC, Miki-Yoshida M, Rocha-Rangel E, Martínez-Sánchez R. Graphite nanoparticle dispersion in 7075 aluminum alloy by means of mechanical alloying. J. Alloys Compd., 2009, 483, 173.