Effect of annealing temperature on the microstructure and optoelectrical properties of ZnO thin films and their application in self-powered accelerometers

Abstract

This paper reports a piezoelectric nanogenerator (NG) with a thickness of approximately 80 μm for miniaturized self-powered acceleration sensors. To deposit the piezoelectric zinc oxide (ZnO) thin film, a magnetron sputtering machine was used. Polymethyl methacrylate (PMMA) and aluminum-doped zinc oxide (AZO) were used as the insulating layer and the top electrode of the NG, respectively. The experimental results show that the ZnO thin films annealed at 150°C exhibited the highest crystallinity among the prepared films and an optical band gap of 3.24 eV. The NG fabricated with an AZO/PMMA/ZnO/stainless steel configuration exhibited a higher output voltage than the device with an AZO/ZnO/PMMA/stainless steel configuration. In addition, the annealing temperature affected the open-circuit voltage of the NGs; the output voltage reached 3.81 V when the annealing temperature was 150°C. The open-circuit voltage of the prepared self-powered accelerometer increased linearly with acceleration. In addition, the small NG-based accelerometer, which exhibited excellent fatigue resistance, can be used for acceleration measurements of small and lightweight devices.

Keywords

piezoelectric ZnO thin film / RF magnetron sputtering / annealing temperature / accelerometer

References

[1] Wang ZL, Wu WZ. Nanotechnology-enabled genergy harvesting for self-powered micro-nanosystems. Angew. Chem. Int. Ed., 2012, 51(41): 11700.

[2] Lewis NS. Toward cost-effective solar energy use. Science, 2007, 315(5813): 798.

[3] Sinha N, Goel S, Joseph AJ, Yadav H, Batra K, Gupta MK, Kumar B. Y-doped ZnO nanosheets: gigantic piezoelectric response for an ultra sensitive flexible piezoelectric nanogenerator. Ceram. Int., 2018, 44(7): 8582.

[4] Mitcheson PD, Yeatman EM, Rao GK, Holmes AS, Green TC. Energy harvesting from human and machine motion for wireless electronic devices. Proc. IEEE., 2008, 96(9): 1457.

[5] Saadon S, Sidek O. A review of vibration-based MEMS piezoelectric energy harvesters. Energy Convers. Manage., 2011, 52(1): 500.

[6] Harb A. Energy harvesting: State of the art. Renewable Energy, 2011, 36(10): 2641.

[7] Bowen CR, Kim HA, Weaver PM, Dunn S. Piezoelectric and ferroelectric materials and structures for energy harvesting applications. Energy Environ. Sci., 2013, 7(1): 25.

[8] Wang PH, Du H. ZnO thin film piezoelectric MEMS vibration energy harvesters with two piezoelectric elements for higher output performance. Rev. Sci. Instrum, 2015, 86(7): 1131

[9] Wang PH, Tanaka K, Sugiyama S, Dai XH, Zhao XL, Liu JQ. A micro electromagnetic low level vibration energy harvester based on M.M. technology. Microsyst. Technol., 2009, 15(6): 941.

[10] Wang PH, Du HJ, Shen SN, Zhang MS, Liu B. Deposition, characterization and optimization of zinc oxide thin film for piezoelectric cantilevers. Appl. Surf. Sci., 2012, 258(24): 9510.

[11] Wang PH, Du HJ, Shen SN, Zhang MS, Liu B. Preparation and characterization of ZnO microcantilever for nanoactuation. Nanoscale. Res. Lett., 2012, 7, 1.

[12] Wang PH, Pan L, Wang JY, Xu MY, Dai GZ, Zou HY, Dong K, Wang ZL. An ultra-low-friction triboelectric-electromagnetic hybrid nanogenerator for rotation energy harvesting and self-powered wind speed sensor. ACS Nano, 2018, 12(9): 9433.

[13] Adv. Funct. Mater., 2018, 28(11)

[14] Wang S, Lin L, Wang ZL. Nanoscale triboelectric-effect-enabled energy conversion for sustainably powering portable electronics. Nano Lett., 2012, 12(12): 6339.

[15] Wang ZL. Self-powered nanosensors and nanosystems. Adv. Mater., 2012, 24(2): 280.

[16] Xia YP, Wang PH, Shi SW, He G, Zhang M, Lü JG, Sun ZQ. Effect of oxygen partial pressure and transparent substrates on the structural and optical properties of ZnO thin films and their performance in energy harvesters. Int. J. Miner. Metall. Mater., 2017, 24(6): 675.

[17] Chen G, Song C, Pan F. Magnetoresistive sensors with hybrid Co/insulator/ZnO: Co junctions. Int. J. Miner. Metall. Mater., 2013, 20(2): 160.

[18] Chen ZS, Guo B, Yang YM, Cheng CC. Metamaterials-based enhanced energy harvesting: a review. Physica B, 2014, 438, 1.

[19] Gerhard-Multhaupt R, Sessler GM, West JE. Ultrasonic velocity and absorption in thin polymer films. Conference Proceedings of Ultrasonics International, 1985 317

[20] Toprak A, Tigli O. Piezoelectric energy harvesting: state-of-the-art and challenges. Appl. Phys. Rev., 2014, 1(3): 5880.

[21] Smart Mater. Struct., 2017, 26(8)

[22] Kumar B, Kim SW. Energy harvesting based on semiconducting piezoelectric ZnO nanostructures. Nano Energy, 2012, 1(3): 342.

[23] Zhao JX, Yang J, Lin ZW, Zhao N, Liu J, Wen YM, Li P. An arc-shaped piezoelectric generator for multi-directional wind energy harvesting. Sensors Actuat. A, 2015, 236, 173.

[24] Kang DW, Choi JS, Lee JW, Tack GR. Prediction of energy consumption according to physical activity intensity in daily life using accelerometer. Int. J. Precis. Eng. Manuf., 2012, 13(4): 617.

[25] Chung SR, Yang TH, Shin HC., et al Initial total bilirubin and clinical outcome in patients with ST-segment elevation myocardial infarction undergoing primary percutaneous coronary intervention with drug-eluting stents. Circ. J., 2016, 80(6): 1437.

[26] Vijaya MS. Piezoelectric Materials and Devices: Applications in Engineering and Medical Sciences, 2013, USA, CRC Press

[27] de Silva CW. Sensors and Actuators: Control Systems Instrumentation, 2007, USA, CRC Press, 696.

[28] Joshi S, Nayak MM, Rajanna K. Effect of post-deposition annealing on transverse piezoelectric coefficient and vibration sensing performance of ZnO thin films. Appl. Surf. Sci., 2014, 296, 169.

[29] Ondo-Ndong R, Ferblantier G, Kalfioui MA, Foucaran A, Boyer A. Properties of RF magnetron sputtered zinc oxide thin films. J. Cryst. Growth, 2003, 255(1–2): 130.

[30] Ralib AAM, Nordin AN, Salleh H, Othman R. Fabrication of aluminium doped zinc oxide piezoelectric thin film on a silicon substrate for piezoelectric MEMS energy harvesters. Microsyst. Technol., 2012, 18(11): 1761.

[31] Wang MS, Kim EJ, Chung JS, Shin EW, Hahn SH, Lee KE. Influence of annealing temperature on the structural and optical properties of sol-gel prepared ZnO thin films. Phys. Status Solidi A, 2006, 203(10): 2418.

[32] Zak AK, Abrishami ME, Majid WHA, Yousefi R, Hosseini SM. Effects of annealing temperature on some structural and optical properties of ZnO nanoparticles prepared by a modified sol–gel combustion method. Ceram. Int., 2011, 37(1): 393.

[33] Nat. Rev. Mater., 2016, 1(16031)

[34] Wang ZN, Yu RM, Pan CF, Li ZL, Yang J, Yi F, Wang ZL. Light-induced pyroelectric effect as an effective approach for ultrafast ultraviolet nanosensing. Nat. Commun., 2015, 6, 8401.

[35] Wang Z, Yu R, Wang X, Wu W, Wang ZL. Ultrafast response p-Si/n-ZnO heterojunction ultraviolet detector based on pyro-phototronic effect. Adv. Mater., 2016, 28(32): 6880.

[36] Louhichi M, Hamed ZB, Romdhane S, Egbecd DAM, Bouchrihaa H. The effect of the Al concentration on efficiency of the hybrid AnE-PVstat:Al-doped ZnO nanocrystal solar cells. Opt. Mater., 2017, 73, 473.

[37] Lee S, Hong J, Xu C, Lee M, Kim D, Lin L, Hwang W, Wang ZL. Toward robust nanogenerators using aluminum substrate. Adv. Mater., 2012, 24(32): 4398.