Reconstruction of broken Si-O-Si bonds in iron ore tailings (IOTs) in concrete

Abstract

This paper reports a study on the reconstruction of broken Si-O-Si bonds in iron ore tailings (IOTs) in concrete. Limestone and IOTs were used to investigate the influence of different types of coarse aggregates on the compressive strengths of concrete samples. The differences in interfacial transition zones (ITZs) between aggregate and paste were analyzed by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). Meanwhile, X-ray diffraction (XRD) and infrared spectroscopy (IR) were used to study microscopic changes in limestone and IOTs powders in a simple alkaline environment that simulated cement. The results show that the compressive strengths of IOTs concrete or paste are higher than those of limestone concrete or paste under identical conditions. The Ca/Si atom ratios in the ITZs of IOTs concrete samples are lower than those of limestone concrete; the diffraction peak of the calcium silicate phase at 2θ = 29.5°, as well as the bands of Si-O bonds shifting to lower wavenumbers, indicates reconstruction of the broken Si-O-Si bonds on the surfaces of IOTs with Ca(OH)₂.

Keywords

iron ore tailings / broken Si-O-Si bonds / alkaline environment / reconstruction

References

[1] Yang D, Zeng DH, Zhang J, Li LJ, Mao R. Chemical and microbial properties in contaminated soils around a magnesite mine in northeast China. Land Degrad. Dev., 2012, 23, 256.

[2] Sanchez-Lopez AS, Carrillo-Gonzalez R, Gonzalez-Chavez MDCA, Rosas-Saito GH, Vangronsveld J. Phytobarriers: Plants capture particles containing potentially toxic elements originating from mine tailings in semiarid regions. Environ. Pollut., 2015, 205, 33.

[3] Fan SH, Xiong JW, Xu T, Chen SY, Zhang WQ. QFD design of machine-made sand based on independent/decomposition axiom. Procedia Eng., 2017, 174, 442.

[4] Thomas BS, Damare A, Gupta RC. Strength and durability characteristics of copper tailing concrete. Constr. Build. Mater., 2013, 48, 894.

[5] Zhao SJ, Fan JJ, Sun W. Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete. Constr. Build. Mater., 2014, 50, 540.

[6] Han FH, Li L, Song SM, Liu JH. Earlyage hydration characteristics of composite binder containing iron tailing powder. Powder Technol., 2017, 315, 322.

[7] Cheng YH, Huang F, Li WC, Liu R, Li GL, Wei JM. Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete. Constr. Build. Mater, 2016, 118, 164.

[8] Cai LX, Ma BG, Li XG, Lv Y, Liu ZL, Jian SW. Mechanical and hydration characteristics of autoc-laved aerated concrete (AAC) containing iron-tailings: Effect of content and fineness. Constr. Build. Mater, 2016, 128, 361.

[9] Ma BG, Cai LX, Li XG, Jian SW. Utilization of iron tailings as substitute in autoclaved aerated concrete: physicomechanical and microstructure of hydration products. J. Cleaner Prod., 2016, 127, 162.

[10] Huang XY, Ni W, Cui WH, Wang ZJ, Zhu LP. Preparation of autoclaved aerated concrete using copper tailings and blast furnace slag. Constr. Build. Mater, 2012, 27, 1.

[11] Zhu PL, Ding WW, Yang J, Qian XQ. Determination of available alkali content of iron tailings and study on alkali activity. China Concr. Cem. Prod., 2011 20.

[12] Wu RD, Liu JH. Experimental study on the concrete with compound admixture of iron tailings and slag powder under low cement clinker system. Adv. Mater. Sci. Eng., 2018

[13] Moon KS, Fuerstenau DW. Surface crystal chemistry in selective flotation of spodumene (LiAl[SiO₃]₂) from other aluminosilicates. Int. J. Miner. Process., 2003, 72, 11.

[14] Gao ZY, Li CW, Sun W, Hu YH. Anisotropic surface properties of calcite: A consideration of surface broken bonds. Colloids Surf. A., 2017, 520, 53.

[15] Hu YH, Gao ZY, Sun W, Liu XW. Anisotropic surface energies and adsorption behaviors of scheelite crystal. Colloids Surf. A., 2012, 415, 439.

[16] Longo VM, Gracia L, Stroppa DG, Cavalcante LS, Orlandi M, Ramirez AJ, Leite ER, Andres J, Beltran A, Varela JA, Longo E. A joint experimental and theoretical study on the nanomorphology of CaWO₄ crystals. J. Phys. Chem., 2011, 115, 20113.

[17] Cooper TG, De Leeuw NH. A combined ab initio and atomistic simulation study of the surface and interfacial structures and energies of hydrated scheelite: introducing a CaWO₄ potential model. Surf. Sci., 2003, 531, 159.

[18] Gao ZY, Sun W, Hu YH, Liu XW. Anisotropic surface broken bond properties and wettability of calcite and fluorite crystals. Trans. Nonferrous Met. Soc. China, 2012, 22, 1203.

[19] Zhang ZY, Cui JF, Wang B, Jiang HY, Chen GX, Yu JH, Lin CT, Tang C, Hartmaier A, Zhang JJ, Luo J, Rosenkranz A, Jiang N, Guo DM. In situ TEM observation of rebonding on fractured silicon carbide. Nanoscale, 2018, 10, 6261.

[20] Nakashima Y, Razavi-Khosroshahi H, Takai C, Fuji M. Nonfiring ceramics: Activation of silica powder surface for achieving high-density solidified bodies. Adv. Powder Technol., 2018, 29, 1900.

[21] Borouni M, Niroumand B, Maleki A. A study on crystallization of amorphous nano silica particles by mechanical activation at the presence of pure aluminum. J. Solid State Chem., 2018, 263, 208.

[22] Li JJ, Hitch M. Structural and chemical changes in mine waste mechanically-activated in various milling environments. Powder Technol., 2017, 308, 13.

[23] Vidmer A, Sclauzero G, Pasquarello A. Infrared spectra of jennite and tobermorite from first-principles. Cent. Conor. Res., 2014, 60, 11.

[24] Hao BH. IR analysis of the chemical bond changes in quartz powder during superfine milling. Min. Metall. Eng., 2001, 21, 64.

[25] Kaya S, Kaya C, Obot IB, Islam N. A novel method for the calculation of bond stretching force constants of diatomic molecules. Spectrochim. Acta, Part A, 2016, 154, 103.

[26] Shettima AU, Hussin MW, Ahmad Y, Mirza J. Evaluation of iron ore tailings as replacement for fine aggregate in concrete. Constr. Build. Mater., 2016, 120, 72.

[27] Saito F, Mi GM, Hanada M. Mechanochemical synthesis of hydrated calcium silicates by room temperature grinding. Solid State Ionics, 1997, 101-103, 37.

[28] Zapata F, Garcia-Ruiz C. The discrimination of 72 nitrate, chlorate and perchlorate salts using IR and Raman spectroscopy. Spectrochim. Acta, Part A, 2018, 189, 535.

[29] Li YB, Wang B, Xiao Q, Lartey C, Zhang QW. The mechanisms of improved chalcopyrite leaching due to mechanical activation. Hydrometallurgy, 2017, 173, 149.

[30] Xu YZ, Jiang T, Wen J, Gao HY, Wang JP, Xue XX. Leaching kinetics of mechanically activated boron concentrate in a NaOH solution. Hydrometallurgy, 2018, 179, 60.

[31] Souri A, Kazemi-Kamyab H, Snellings R, Naghizadeh R, Golestani-Fard F, Scrivener K. Pozzolanic activity of mechanochemically and thermally activated kaolins in cement. Cem. Concr. Res., 2015, 77, 47.

[32] Zhang S, Pan ZD, Wang YM. Synthesis and characterization of (Ni, Sb)-co-doped rutile ceramic pigment via mechanical activation-assisted solid-state reaction. Particuology, 2018, 41, 20.

[33] Duxson P, Fernandez-Jimenez A, Provis JL, Lukey GC, Palomo A, van Deventer JSJ. Geopolymer technology: the current state of the art. J. Mater. Sci., 2007, 42, 2917.

[34] Zhang ZH, Yao X, Zhu HJ, Chen Y. Role of water in the synthesis of calcined kaolin-based geopolymer. Appl. Clay Sci., 2009, 43, 218.

[35] Liew YM, Heah CY, Mohd MAB, Kamarudin H. Structure and properties of clay-based geopolymer cements: A review. Prog. Mater. Sci., 2016, 83, 595.